Other devices in addition to the NOR-MXI devices in Device Manager

Similar Questions

• Equium L40 and WXP - lost his and other devices

  I have restored my Toshiba Equium L40 of Vista Home Premium on WXP Home Premium and now I lost the sound. When I looked at the device under other devices Manager I have a lot of yellow exclamation points next to a?

  -Audio device on high definition audio bus
  -Control Ethernet
  -Device modem on high definition audio bus
  -Video controller
  -Video controller (VGA compatible)
  PLEASE, PLEASE, PLEASE, CAN SOMEONE HELP ME

  Hello

  These yellow exclamation points mean the Win XP drivers are missing.

  -Control Ethernet-LAN or Wlan driver > is required
  -Video controller-> graphics card driver is needed
  -audio device-> sound driver is needed

  But listen buddy;
  You must install the Win XP drivers, you must Win XP SP3 because this package contains hotfixes and updates.
  So before install you audio driver, you need to install SP3!

• How to correct for IQ rates which are not supported by the NOR-2920?

  Hi all;

  I use Labview 11 and the NOR-2920 (Ettus Radio) to build a FSK receiver, I the Modulation toolkit.

  My carrier is 169 MHz, my flow is 256Kbits/sec, my tour of frequency is around 89. 5 kHz, I choose a 16, my symbols FSK samples/symbol is 2 (0-1).

  My receiver is close to work, however, I am getting an extra of 5 bits in my 408 bits frame data.

  My sync bits are all the tail and the front end of my frame data which has also a meter 16-bit images on the front of the frame, which runs from 0 to 65535 without losing data.

  I think that the extra bits are the result of rate IQ I try to set to 4096K based on 256 K * 16 = 4096 K

  The radio seems to default to 4,166667 M for the rate of IQ.

  The ratio of 408bits /415bits = 4096/4166 coincidence or not?

  Is there a way around this problem in the configuration of the NOR-2920 or how I manage the sampling and recovery of data.

  Any guidance would be greatly appreciated.

  Don3of4

  All interested for:

  The answer is Labview a an I / Q resample module.

  Connection between the extraction of radio and the demodulation modules, set the sampling frequency entry real want = rate * of the data samples / symbol.

  Work so far, don't know what is happening when other tolerances overclocking begin to influence the data, but for now his work.  Also don't know why this is not incorporated into the receiver or the fetch modules for sampling rate that you actually need from the beginning but I'm still learning.

  Don3of4

• Why can I not install photoshop addition to the cc2015.

  Why can I not install photoshop addition to the cc2015.

  "Adobe Extension Manager cannot install because it requires

  Photoshop at least version 13.0"

  Please refer to other posts on this topic, but essentially the extension manager is not recommended for 2015 of CC. You must use CC Desktop App for facilities instead.

• HP Pavilion G6: Wi - Fi mobile missing from Device Manager download driver does not help

  I have an old HP Pavilion G6-1d98dx I got like a hand running Win 7 Home Premium 64 - bit SP1 and cannot get the wireless working.  The orange/amber light on the F12 key is on and cannot be disabled.  The Wi - Fi equipment is Ralink 5390 rev3.  The device does not appear in the device as one 'hidden' or 'other' Device Manager, much less as a network device.  I downloaded several different drivers on the HP site for this unit, including a dated January 2016, without success.  Any suggestions?

  At any time.

  I am pleased to have been of assistance.

  You don't need to do a thing... the card will work, or it will not be passed the HP welcome screen until you get a card error wireless not supported.

  Here are the links to the wireless and bluetooth drivers you need for this card.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp55079.exe

  Please post back and let us know how did the swap of the wireless card.

• "unable to connect" iMac to the printer, but other devices peuvent

  I have a HP Officejet which was working fine, then all of a sudden not. When I try to print, I get an error "unable to connect to the printer, will try again in 30 seconds." I deleted the printer several times and added in my preferences, so my iMac can see the printer, but when it comes to print to it, is not going to see it.

  In addition, I have no problem, print on it to my MacBook Pro, nor fact my wife on her MacBook.

  If I type the IP address in a browser on any other device including my iPhone, I can reach HP diagnostics and configuration screen, but my iMac just times out.

  Things I've tried: resetting the printer preferences. Deleting all HP prefs in the library. Updated with the latest version of the software of HP for Snow Leopard. Adding the printer using the IP address. Installed the latest driver from HP, Apple.

  This is a clean installation of 10.6.5 (same OS other Macs are running. This started happening a few days ago and prompted me to do a clean install, as I had other questions. I thought the clean install might clarify the issue, but the problem persists.

  Where did you got your HP software?  Has it labeled as being compatible with 10.6?

  Restart your Mac and your router.

• I signed on the sync, I have the code, but do not seem to be able to enter on my other devices

  Running W7 on PC and laptop and have Android signed all managed to synchronize. the PC has generated 12digit code, but I can't find how to pair the devices I tried using Mozilla, but my computer doesn't seem to have the same screen and can not get the possibility of devices pair

  29,0 Firefox and later use the new synchronization version that uses a Firefox account and use just the name and the password and no longer use a sync (recovery) separated key (the key of synchronization is derived automatically the password).
  
  This version is completely different from the version previously, and you need to install Firefox 29,0 or later versions on all connected devices.
  
  You can enter the name and password of the account Mozilla on other devices with a Firefox 29,0 or later to add additional devices.

  The new version of synchronization used in Firefox 29 and later again use a recovery key to encrypt the data locally before you download, but this recovery key is generated internally from the password of the account in Firefox, so you no longer need to worry about this.

  • https://support.Mozilla.org/KB/how-to-update-to-the-new-Firefox-sync
  • https://wiki.Mozilla.org/identity/Firefox-accounts
  • https://blog.Mozilla.org/services/2014/02/07/a-better-Firefox-sync/

• Pavilion dv4-1145go: software for the "other devices" in the Device Manager in a new installation

  After having rebuilt the laptop above with the new motherboard and the hard disk, I loaded a new copy of Vista using an ISO Setup disk and my COST. Everything seems perfectly.

  But I can't connect to my router, LAN or wireless. Realtek RTL 8101 E NIC driver appears to be installed correctly, but the network controller and several "other devices", for example: device Base system, SM Bus controller, etc need drivers.

  My dilemma is that I don't know what (s) to search for.

  In addition, while searc hing of HP Web sites, I was not able to locate the drivers available for this model of Pavilion. Just Web sites ask me enter the model number, then display the image of this model and ask again the model number. Pilots locations have changed on the HP Web site?

  Any help I can get will be greatly appreciated.

  At any time.

  Glad to be of assistance.

  Try the driver wifi directly from Intel.  You want the driver of first or second in service if you're running Vista 32 or 64 bit. Then download and install the first driver on a Web page.  You don't need the software if you let Windows manage wireless connections.

  14.3.0	09/03/2012	Windows Vista 32-bit	Download
  14.3.0	09/03/2012	Windows Vista 64-bit	Download

  ACPI\HPQ0004:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870 & swItemId = ob_81492_2 & swEnvOid = 2096

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-61697-2 & CC = US & DLC = in & LC = on & os = 2093 & productOid = 3795304 & sw_lang =

  Semper Paratus!

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Bluetooth keeps on searching, but can't find them and the laptop is not detectable in other devices

  Original title:

  Bluetooth keeps searching

  I have windows 8 on my laptop. trouble with bluetooth. He continues to search for available devices but is not found. In addition, the laptop is not detectable in other devices. the customer care guy told me to re install the bluetooth driver by downloading from the microsoft Web site. not able to see that now. pls help.

  Hello

  Here is the download link for SW update for laptop you.

  You can install the appropriate software for your computer easier and faster using the SW update.
  SW update program helps you install and update your software and the driver easily.

  http://www.Samsung.com/in/support/model/NP355E5X-A02IN-downloads

• I can't sign in with the Apple ID on my nut iPhone it works on my other devices

  Hello. I can not connect to icloud or App Store etc on my iPhone. He sees ID or password invalid, but it works fine on all my other devices. So, I know that the ID and password are correct.

  I use iOS 10 but had the same problem on 9.

  Hello, you can use these troubleshooting steps to resolve your problem iCloud: If you have problems logging into iCloud.com

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Accidentally, I put my Macbook not in the stream with other devices

  It is a real irritable and I hope that someone can help you. I've had my Macbook Pro for about 4 years now but had never used icloud.  When I decided to start doing so yesterday I went in iCloud in settings and seen something like: "Do not allow for synchronization with other devices" and accidentally ticked.  Everything already worked well without using iCloud, but now nothing can be synchronized with the Macbook.  Is there something I can do?  I see that the boot Volume has been changed yesterday who must account for this.

  Questions of clarification - were you when you saw synchronizes them only not in System Preferences/iCloud? If this isn't the case here, where were you? If you go into System Preferences/iCloud can you check the boxes to synchronize?

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

  We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

  Hi there, therex!

  It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

  Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

  Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

  Thank you for using communities of Apple Support and have a great day!