Other fonts "NIDialog" when the current CVI 2010 programm after 2012 runtime is installed
I noticed a change in police during execution of a program of CVI 2012 meadow with runtime 2012.
She seems to be the police "NIDialog", unless it is "NIDialogMeta".
The user interface looks like it should when editing it in CVI 2010.
Is - is this expected?
There are UI editing type of a bet...
Yes, you are right. It seems that the font that matches the dialog box OR changed in 2012 of the CVI. It's something that should have been called explicitly in the readme file, and I apologize for this oversight.
OR dialog is, by design, a "variable police." This means that it is a policy that can match different fonts in differect computers because it is linked to an alias (DEFAULT_GUI_FONT) that resolves to different real fonts in different computers, operating systems different and potentially (as here) different versions of the CVI runtime. What has happened in this case, is that a bug has been fixed in CVI 2012 that ICB previously did take into account the Microsoft font substitution table:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes
Going back several years now, DEFAULT_GUI_FONT corresponded to MS Shell Dlg. It seems to me that MS Shell Dlg is a bit outdated and so it has in the FontSubstitutes table above, as well as applications to replace it with something else. In my PC, which becomes "Microsoft Sans Serif". Before CVI 2012, it has been incorrectly not replaced with Microsoft Sans Serif, whereas it is now.
Sorry about that.
Luis
NEITHER
Tags: NI Software
Similar Questions
-
FTP command does not when the current folder is not on the system drive
I have the following problem when I activate FTP from the command prompt when the current folder is not on the system drive.
I have a similar problem when you use a client FTP (ftprush)... It is installed on the D:\ and activation with the startup in D:\ folder reports 10038 (invalid socket handle)... It works fine when the startup folder is c: drive
(MON C:\ est un petit SSD où j'ai mis les programmes opérationnels et les applications les plus utilisées)... my D: drive is a program for non-intensif progs disk)
I have check the environment variables but can't find anything wrong with them, and I never touched at these
Current folder is on my c drive windows :\---> works OK and I can open an FTP site
C:\Windows\System32>FTP
FTP > quit
I change the folder to the very second disc---> broken, the report "ftp:socket" and the existsd.
C:\Windows\System32>d:
D:\>FTP
FTP: socket
D:\ >
I managed to solve my problem by making a
command "netsh winsock reset."
This solves all my problems... including ftprush, filezila, starting the ASP.NET Server in Visual Studio (which also refused to)
implementation)
-
the ButtonField font color when the button is focused, how?
Hello!
I have some problems with implementing the font color when the button is focused.
I have my CustomButton class that extends from ButtonField and
I'm trying to override the method object:
protected void paint(Graphics graphics) { graphics.setColor(0xFF9000); // oragne color super.paint(graphics);}
but when the button is focused color is white. What's wrong?
Hurrah! solution is found:
mybtn = new Button(" My Label ", ButtonField.FOCUSABLE | ButtonField.HIGHLIGHT_SELECT | FIELD_HCENTER) { protected void paint(Graphics graphics) { if(isFocus()) graphics.setColor(Color.ORANGE); else graphics.setColor(Color.WHITE);// super.paint(graphics); !!! graphics.drawText(this.getLabel(), 0, 0); }};
-
The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.
Hello
See the methods listed in the articles below and check.
You receive an error "Microsofthas not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time http://support.Microsoft.com/kb/898512You receive a message "Microsofthas not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode http://support.Microsoft.com/kb/298022
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
2 power supply: voltage increment on one when the current research on the other?
OK, so I work with 2 power supplies E364X Agilent. I have a unit with a door and drain that I do apply power. With the door I am applying 1.5V & .3a current limit, the drain I do a request 9.5V & 1 has current limit. What I'm trying to do, is to increase the tension of the door while controlling the current Drain and have the increments to stop when the Drain current comes down to .5A +/-50mA. I guess I kind of two questions. I use a state machine, the first iteratino defines the PS for the desired parameters (works fine), the next two iteration is supposed to accelerate the Power Supply Gate Voltate with small increments, check the current reading of power drains to see if it falls in the interval given, otherwise the increase continue, check again and so on... I'm having a problem with the part of increment as well as checking for the current game. I was thinking maybe I need to use a flat sequence or something along that line. Any help would greatly be apprecaited
For #1 supply, you should just have the voltage itself inside the loop. It would probably not hurt thanks to additional error checking just in case (you can then give up if there is an error). The rest can probably not stay outside the loop.
-
Outlook Express seems to set font sizes when the recipient receives the e-mail I sent.
Hi again. I should have added to my query on Outlook Express is shrinking the font size of my e-mail in transit that he can be a factor of parameters of beneficiaries, because: a) they seem to get normal size of other people's mail, and IT was tiny - in other words b) I received my mail of I belong to and posted something on a mailing list My message sent 12 points received by the same machine that I had sent the message characters of 7 points. Thanks again!
This is usually a setting on their end. If it looks OK in your folder, then there is nothing you can do. They need adjust the font size when reading in their e-mail program.If it looks small to your sent items, make sure that you have nothing selected for mails including 'white '. -
Why Wizard does not start when the current user?
Program does not RUN. Wizard does not open after you select the Option for the current user
P.S. If you can't always install Firefox, even using the FULL Installer:
Reinstalling but this time download the file on your computer. When the download is complete, install it as an administrator by right clicking the configuration file and select "Run as Administrator".
-
Is it possible to identify the font information when the type was converted to the outline?
I frequently receive art where the type was converted into contour... and then a review type needs. The artist remembers that the font has been used rarely, and trial and error will eventually be used to find a similar font. Is it possible that Illustrator retains this information?
Katrina,
Alas, no.
The possibility to implement a special preventive measure was at least once in this forum: electric shock through the keyboard when the user attempts to outline a font without having saved the direct type in the document (the failure because of the countermeasure of the use of rubber gloves is also mentioned) first.
-
Portege Z10T-A-140 - dock said when the current alternative is connect
So when AC power is connected to the laptop (dock), suddenly user separate the dock (compressed) monitor, what to do?
is it bad for laptop?
model: Z10T-A-140
Sorry mate but I put t understand your problem or your question.
What are you doing with the laptop when the AC adapter is plugged? Don't you remove / unplug the pier table?
To disconnect and remove the dock the computer keyboard, follow these steps:
Unplug and remove the devices and cables connected to the computer.
Press the eject button on the keyboard dock
Slide and hold the latch to the left and then slowly lift the computer to remove it form the support computer and completely shut down the keyboard dock.
The adapter can be connected while eliminating the Tablet from the dock. -
How to create new Admin id when the current administrator id is corrupted - Vista
My id admin does not load. Error is the user profile Service service can not... (I forget the rest). No administrator ID exists so I can connect to my computer with this id, but can't do much except run the existing software.
Is it possible to bypass the existing admin id permissions to create a new admin user account id?
I don't know what to do to avoid buying a new computer and start all over again.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
and you don't have to buy a new computer
If necessary reinstall vista on your computer
-
How know when the current system of BB booted up?
Well, I'm puzzled: key events have long given that the camera is turned on (this is not system availability, is it?), but how to get that info that even without user hitting any key?
The real task at hand: find a way to indicate that your application has performed from the time of start-up.
The idea was to use persistence to store the start time of the app and compare to the availability of the system during subsequent runs - if time app is superior - it ran, otherwise it didn't.
Thank you
Nikolai
I recommend you store your value in RuntimeStore instead of PersistentStore. The RuntimeStore is cleared out when the BlackBerry is reset, in order to make sure that the value you are looking at is the one that your application added to the last start.
-
I have connected the new hardrive as a 'slave', re-installed my Win XP even & re-patched everything on it including SP3, programs & ups back-ups, but oh no! the new hard drive when it is plugged in as a 'master', it does not start!
But with the old hard drive connected as long as 'master', I have the option of "dual boot".
I guess because my new drive is not a reader of "system"? I can see that my old drive is listed as 'system '. How to make my other even without having to re - install all over again? Thank you!
Hi Fishlipps,
Thanks for posting. Most likely you see it as your boot.ini is located on a drive corresponding to your system on a different drive. The easy way to do this would be to reinstall or do a repair on the computer installation. Please make a backup before attempting this.
1.
When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
2.
When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.
3.
Do not choose the option to press R to use the Recovery Console.
4.
In the Windows XP licensing agreement, press F8 to accept the license agreement.
5.
Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
6.
Follow the instructions on the screen to complete the installation.
Another option would be to modify the boot.ini located directly on the root of your drive. Below is a knockout with instructions on how to do it. However please backup all your data by doing one of them because both can make your computer unbootable.
http://support.Microsoft.com/kb/289022 Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
If after installation with kindle, connected external HARD drive disappears
USB ports are usually "matched" in groups, called hubs root. These root hubs then control and distribute the power to the USB ports. If any device on one of the two ports, the hub root, requires too much power, the other port loses power. When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session. Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.
A free USB powered hub can help. These allow usually additional power over USB ports, on its own USB ports.
-
It's something that would drastically improve the speed of my workflow. When I click inside a composition using the text tool, the text layer is always positioned at the beginning of the composition.
Is it possible to make the text layer from the current-time indicator, so don't constantly do defiler to the beginning of the composition and drag the text layer forward in the desired position?
Thank you very much.
There is a preference: create layers at Composition Start Time.
-
Problems with duplicate DATA when the data file was added after the backup completes
Hello
I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).Starting restore at 10-10-2009 18:00:38 released channel: t1 released channel: t2 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39 RMAN-03015: error occurred in stored script Memory Script RMAN-06026: some targets not found - aborting restore RMAN-06100: no channel to restore a backup or copy of datafile 43
The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
Of course, if I try to perform a restore/recovery of the source database, it works without problem:
The 43 data file is re-created and then redo is applied to the course.RMAN> restore database; Starting restore at 13.10.09 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: sid=156 devtype=DISK creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF channel ORA_DISK_1: starting datafile backupset restore channel ORA_DISK_1: specifying datafile(s) to restore from backup set restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF .....
So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
Thanks in advance for any answers.
Kind regards
SwearHi swear,.
I got exactly the same problem during replication.
Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
run
{
backup incremental level 0
format "% d_ % s_ %%t p_ bk_ '.
filesperset 4
database not saved;
}(I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)
This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.
Kind regards
Tycho
Maybe you are looking for
-
iTunes, lose some pounds in iBooks
iTunes fails to list books that appear in iBooks and are on my iPad. It's frustrating because iTunes cannot be used to add and delete books from my iPad. Any suggestions?
-
Why can't I manually manage music with iCloud and Apple active?
In a previous discussion, the following point kept deployed: "you must disable the iCloud library in settings on the iPhone, and then manage it manually the music and videos option will be available again." True, but... WHY? # * % $! ' s sake, I shou
-
HP pavilion a450 and nvidea gt 520
Hi there, no hp pavilion a450 nvidea gt 450 support? Thank you Ron
-
Case of belt blackBerry Smartphones BB Curve 8520
I have a silicone cover on my Curve 8520. Anyone have a recommendation for a good belt clip case that BB and the lid will fit in? My old BB 8300 case does not sit well with the lid.
-
I have shortcuts to programs on my desktop I want to put in my windows menu start. I looked and there was no possibility to add to the start menu. Does anyone have an idea how to do this? Thank you