'Other' my training will not be followed my calories suddenly; It was fine yesterday

I use my Apple Watch for a few months now to track my calories burned.  This morning I put on 'Other' and developed, and he did not follow calories, active or not.  Then I put it on 'Inner Run' and he followed very well.  I went back to 'Other' and nothing, even now while I do just domestic things, it is not tracking calories.  It KEEPS track of my heart rate very well.  Even when my HRT was 145, it says 0 calories.

Advertisement

Hello

It can help to restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first:

-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

-To switch on: press and hold the side button until you see the Apple logo.

Tags: Apple Watch

Similar Questions

  • MY STREETS & TRIPS 2013 WILL NOT BE FOLLOWED

    MY STREETS & TRIPS 2013 WILL NOT BE FOLLOWED WITH GPS LOCATION.  LOCATION DISPLAYS ON MAP, BUT THE MAP DOES NOT MOVE AND I "RUN" OUT OF THE SCREEN AND HAVE TO MANUALLY MOVE CARD?  DON'T HAVE THIS PROBLEM WITH THE OLD VERSION... I CAN'T FIND THE SETTING TO THE HELP SCREEN

    Hi Steve,.

    I see that you have problems with MY STREETS & TRAVEL 2013. I'll help you with this problem.

    1. have you made changes on the computer recently?

    Method 1.

    I would like to contact the streets and travel for additional assistance.

    Links: http://www.microsoft.com/streets/en-us/support-and-training.aspx

    Support for MapPoint, streets & trips and Highway: http://support.microsoft.com/ph/1058#tab0

    Method 2.

    I would like to post your question on the streets and travel to support communities as well.

    See the link: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Since the upgrade to Windows 8 Youtube and other videos flash will not play smoothly

    Since I've upgraded to Windows 8 Youtube and other flash videos will not play smoothly.  When I press play, the video freezes on an image and the sound is fine but the image is locked for several seconds.  So if it starts to play, he is so rough its not watchable.  If I pause the video and let it buffer for a bit and press play again it works usually smooth for 3-4 seconds in the rough again goes.

    This is the case with IE, Firefox and Chrome.  My computer is a HP DV7 3060 64-bit with 4 GB of Ram.

    I have tried to update drivers video, impossible to find the best drivers.

    Any help would be really appreciate as I really get annoyed by this and do not want to go back to Windows 7.

    Here are the video drivers for your graphics card.

  • Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

    Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

    Hi BrianJ641,

    Follow the steps in the article.

    http://support.Microsoft.com/kb/307545

    Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

  • My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

    My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

    Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

  • The difficulty to pass the black diagonal line that follows the clips in WLMM believe its called the toolbar. Sometimes it 'moves' and other times it will not move

    This question is more than 6 characters. I'm unable to move the black diagonal line preceding each video clip in WLMM, believe he is called to the toolbar. Sometimes when I left click it will move for me and sometimes it does not move or go anywhere. What I am doing wrong? In addition, there are a clip in particular that the toolbar will not pass through the play. Like the above, sometimes it works and sometimes not.

    Hello

    Given that the problem is related to Windows Live Movie Maker, I suggest that ask you your question in Windows Live Solution Center.

    Movie Maker - Windows Live Solution's portal

  • More often than in other music Apple will not be broadcast on my iMac, but at the same time, it will be on my iPad

    I am continually frustrated with Apple's music streaming on my iMac.  Looks like a song loads, but never gets started playing.  I always thought the problem was my internet connection, but lately I discovered that, although my iMac does not load a song, if at the same time, I use my iPad on my wifi it loads and plays immediately.  What is the problem with the music does not not on my iMac?

    Hello Lucyskye,

    Thank you for asking your question here in Apple Support communities. I understand you want to be able to play your music. I can't do anything without my music all day. Let me give you what I can to help you solve this and get your music to play on the iMac.

    I don't want to bring music to Apple implemented correctly first. Apple's music composition only allows you to stream music from Apple on one device at a time, unless you have a family membership. Even if you have a family membership, you can still only broadcast on one device at a time by Apple ID. For this reason, I suggest isolate us the devices first and this test with the iMac.

    1. exit the Apple music on the iPad. Please leave the app. You can do this by double tapping the home screen and drag the application to the top music. This article has the instructions and example pictures. Force a nearby application on your iPhone, iPad or iPod touch

    2. restart the iMac.

    3. If the problem persists, start the iMac in Mode safe mode and see if the load and play songs. (Although the speakers will be disabled, just visually see if she manages to go anywhere where it usually hangs up on. This article talks about fashion without failure: try safe mode if your Mac does not start-up

    4. you want to then also to test in a Test user. This article helps with that. How to test a question in another account on your Mac user

    If the problems remain and music will not play on the iMac in Mode without failure or user Test, then we want to stop the iMac. Back to the iPad, then click Settings > cellular and disable cellular data for a while. Make sure your iPad is only able to use a Wi - Fi connection and not able to access cellular data if the songs will not play on your Wi - Fi network. Then, open the app music again and try to play a song.

    If the music will not play one cell time is off, the cause is some parameters with your wireless network. You can check this information for the most common causes of problems with home networks. First of all, make sure that you use a wireless network open as your home network. If you connect to a Wi-Fi as a school, work, or other business, the airport, a military base or a hotspot of a network type, it probably won't work because these types of high security and high traffic and high security networks. They do not have the necessary data back causing problems exactly like the one you are currently experiencing.

    Do you use any third-party firewall (even on the router!), protection against viruses or proxies (which hide your identity on the internet)? Some security applications also do, but are called only for security or VPN. These few apps with names like Astrall or Webroot Secure Anywhere Antivirus, antimalware apps. There are literally hundreds of these applications that block the incoming ports that will not allow the function runs.

    If you want to check that the port is open on your iMac and the network, you can use this article: port TCP test between computers and peripheral connectivity. Apple music uses port 80, and iTunes music sharing is port 3689. You can find a list of all the ports used by Apple here: TCP and UDP ports used by Apple software.

    You can also find these two useful articles if you find that the problem is with your network.

    Recommended settings for the WiFi routers and access points

    Solve the problems between iTunes and third-party security software

    Don't forget to turn your cellular data within settings > cellular on the iPad once you're done test. Just in case music plays in Safe Mode or the Test user, you work through this article to resolve the issue. Mac OS x: how to solve a problem of software.

    Thanks again and have a great rest of your day!

  • updates will not download all of a sudden. Get the error 800b0100 codes & 80073712

    The AMD 965 new Windows 7 computer and updates worked and now since 3 days I have been troubleshooting these two codes 800b0100 & 80073712. I downloaded all the patches from microsoft tells me and still no success. McAfee said the reason why my subscription will not download onto the computer is I need these updates, so my system is not protected. I was on google, microsoft and other places. I hope someone on this website can help. Microsoft is not responding to my trouble ticket, as they said they would (within 24 hours).

    You receive the error code "0 x 80073712" when you try to use Windows Update http://support.microsoft.com/kb/931712>

    If you receive Windows Update error 800b0100, it means that a file needed by Windows Update is corrupted or missing. System update readiness tool can correct some conditions that can cause this error. To use the tool, follow these steps:

    1. go to the System Update Readiness Tool http://support.microsoft.com/?kbid=947821Web page >. Under the "Advanced information for users" section, find the Windows edition and the system type of your computer, and then click the link to download the system update readiness tool. To find your edition of Windows, see view your computer information http://windows.microsoft.com/en-us/windows7/View-your-computer-information>.

    Reset

    2. run Windows Update again.

  • Firefox has crashed, and now I have a constant stream of blank tabs that keep popping up in front of all the others. They will not erase.

    First all the tabs I had open suddenly lacking at the Firefox help page. Now I have a constant stream of blank tabs that keep popping up in front of others. I click again to remove the but they back just pop up. Also whenever I delete a tab while browsing a Web site, I get another white added to the front of all the others. I uninstalled and reinstalled the program and it did not help.

    You ensure that you do not have a problem with a sticky key F1 on your keyboard?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

    • Makes no changes on the start safe mode window.

    See:

    If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

    • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
    • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

    If this does not help then try a new profile.

    See basic troubleshooting: a new profile

    Your above posted the details of the system tampon() obsolete show with known risks to stability and security that you should update.

    1. Shockwave Flash 10.1 r53
    2. Next-generation Java plug-in 1.6.0_14 for Mozilla browsers

    Update the Flash plugin to the latest version.

    Update the Java plugin to the latest version.

  • Windows update fails with 0 x 80070424 among others (update agent will not install)

    I tried to install iTunes 9.2 on my computer of girls running Vista 64 sp1.  It failed several times with an error message encrypted with public keys and RCH80.  I took this down to a problem of lack of security patches.  In the process, I noticed that Windows Update has been fails with error 0 x 80070424, indicating a required service was not running.

    so I downloaded sp2, also the operation failed with error 0 x 80070424 even.  I checked the Background Intelligent Transfer and start-up and running (so I restarted), I checked Windows Update and it was also running and so I restarted.  Same result.  I've disabled UAC and restarted.  Still no joy.

    Then I read an article on the subject, said a service called "Automatic updates" should be running, not only he was not running, did not exist. Some that I've been on something I downloaded "windowsupdateagent30 - x 64 .exe" to install the service.  Unfortunately, this fails with a fatal error, no number error, simply "windows has encountered a fatal error.

    It is where I am at this time - trying to figure out a fix for this.  Thank you.  (I also disabled AV, firewall, etc., ran several antivirus scans, malware scans including Malware Bytes, AVG and Avast and MS Defender and rootkit detectors which come clean).

    OK I found this user Mohsen Arjomand:

    Step 1: Manually replace the corrupted Windows Modules Installer
    ==================================
    Step 1: Change the owner of the file maintenance
    1. click on start. In the search bar, type "%windir%" (without the quotation marks
    marks) and press ENTER.
    2. click right maintenance folder and click 'properties '.
    3. click on the Security tab.
    4. click on advanced.
    5. click on the owner tab.
    6. click on edit.
    7. under "change the owner of ', select the administrator account. Click
    "Replace the owner of subcontainers and objects". Click OK.
    8. click on OK. You may receive an error of "deny access". Just move forward.
    9. in the Security tab of the properties of maintenance records, click on change.
    10 select Administrators, and then grant him "total control".
    11. click on OK.

    Step 2: Manually restore the missing file
    ============================
    1. download and save the file http://www.4shared.com/file/197624120/979be69/fix.html on the desktop form fix.zip.
    2. extract the two files. TrustedInstaller.exe and TrustedInstaller.reg.
    3. copy the file TrustedInstaller.exe in C:\Windows\servicing folder.

    Step 3: Registry backup
    ===================
    1. click on start. Type REGEDIT in the search bar and press ENTER.
    2. Select the computer (the root node) in the left pane, click export under the
    Menu of files, choose all under the scope of the export, select desktop in the Save in box
    and type backup in file name. Click Save.

    After that, please refer to the following procedure to import the registry key.

    Step 4: Import TrustedInstaller.reg
    ===========================
    1. double-click on the TrustedInstaller.reg file in the file Fix.zip.
    2. click Yes when you are prompted to import.

    Restart the computer and check if Windows Update works.

    And then manually install the components of update as stated in...

    http://support.Microsoft.com/kb/949104/

    Voila!

    It's annoying that it is a known problem with the trustedinstaller.exe being corrupted and or deleted, but it is so hard to find an answer to the question.

  • Accordion, Interaction of training will not play Audio

    I have Adobe Captivate 9.0.2.421 on a Mac computer. I create a training with audio accordion Interaction in each of the four drop downs. However, when I saw, the sound does not play when you click on a drop down.

    It is possible that I found them here: Adobe Captivate 9--> Gallery---> Interactions.  (see screenshot).

    In any case, I found the solution to my problem in another forum post from Rick "Captiv8r:

  • You want to use a font that is on my computer and can be used in other programs, but will not appear in Photoshop elements 14.

    I downloaded fonts high voltage Rough and love him, want to use it.  Can use it in all other programs, but Photoshop.  It does not appear.  I uninstalled and reinstalled.  Any ideas for help?  Thank you!!!

    Look for the regular regular name on the list of 14 fonts pse.

    What is the police connection high voltage?

  • Stupid question: why tinytots (and other similar fonts) will not work in Firefox?

    I am a user of Tumblr, if of course if I had to work on a theme, I would like to see the fonts that I have chosen to serve. In Chrome, everything seems as it should usually (relative to the fonts). In Firefox, I respond specifically to these two browsers so my theme seems not completely horrible. In my opinion, only a browsing experience more could be made if Firefox showed fonts such as tinytots for more than just me, but for someone else who is perhaps not brave enough to post about it. This brings me to another question: I'm just ranting or is it possible I can see these fonts and not know about it?

    This isn't a stupid question.

    Google Chrome has its own library of fonts.

    Mozilla Firefox runs Windows fonts library.

    To run on Firefox fonts, they must be installed on Windows and then Firefox must be restarted.

    Sometimes, Web sites do not use the correct font name and the police is found, even if it is installed.

    A good website designer would design a Web site with backup for users to load fonts if they do not have the installed font.

  • My computer "does not support" lightroom. In other words, it will not download

    Bought lightroom last night and came home to download. It gave me an error that my computer cannot support the download.

    What in the world I am doing...

    You should try the software first, or at least check to see if your material conforms to the system requirements for the software before you purchase.  If it's a matter of your machine not answering does not meet while the only actions available are to return and get a refund or to update your computer to meet the requirements.

    Lightroom - https://helpx.adobe.com/lightroom/system-requirements.html

    Return, cancel or change an Adobe order-

    http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • New and other history videos will not play in Firefox for java, adobe and Yahoo v20.0.1 are underway. All I get is a circle that circulate, videoes work very well in IE9.

    All plug-ins are up-to-date and current, have disabled and checked for problem of plug-ins with no result. I've uninstalled and reinstalled Firefox, Java, Adobe Flash Player, Real Player, several times with no results. Also uninstalled my software antivirus temporarily without any result.

    Problem solved! I downloaded and installed Firefox 24.0 Beta. Apparently Mozilla team programming carried out all the changes right in the new version. Now all the videos from Yahoo and BBC working.

    Link: http://www.mozilla.org/en-US/firefox/channel/#beta

Maybe you are looking for


HashFlare