Other results: preliminary report does not properly during the first run in a loop

Similar Questions

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad

• loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• 4.0 ai2 - automatic adjustment does not properly in the result of the query grid

  Hello

  in 4.0 ai2 automatic adjustment does not work in the result of the query grid.

  Rather than shrink the columns to the narrower size taking into account topics and content (see 3.2), it auto ' enlarged to fit the entire grid of data query.

  She looks worse and makes it harder to see results at a glance.

  Bug and will be fixed for the release of v4.

• Report does not appear, on the contrary, in the page showjobs, I have to click the rep

  I use forms to call reports are displayed in pdf format. I use 10g Oracle Forms and reports. All 10g fmb, rdf and pll all recompiled files. Thus, the forms, reports, PLL is all coded correctly and worked for several years. Forms of 10 GB will work perfectly and made webutil. All other reports are working well and which appear according to the requirement. However, a specific report does not appear. Instead, on the showjobs page, I click on the report name. Then it shows the report. But I need the report to be published as the other reports are appearing. Was associated with each coding but the result is not accepted. Any ideas?

  Any ideas?

  You didn't call web.show_document after run_report_object? Or call the it wrong?

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• Click event does not work for the first choice of object field index

  Hello

  In my application, there is a ObjectChoiceField inMainScreen

  I want to get change Listner of ObjectChoiceField after clicking on index 0. When I am clicking on the second element of the choice field, I am able to move to another screen. But for the first selection of the element, it does not move on the screen.

  if(field == mOcfVehicle)
              {
                  Logger.out("MyProf", "vehicle choice field touched ");
                  int index = mOcfVehicle.getSelectedIndex();
                  Vector vecVID = store.getVehicleID("VehicleID");
                  final String strVehId = vecVID.elementAt(index).toString();
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
  
                      public void run() {
                          // TODO Auto-generated method stub
                          UiApplication.getUiApplication().popScreen(MyProfScreen.this);
                          UiApplication.getUiApplication().pushScreen(new AddNewCarScreen(1, strVehId));
                      }
                  });
  //
              }
  

  Please help me...

  Here it happens little differently. I explain the requirement properly. Suppose that the I am A screen where I have the ObjectChoiceField. I added a choice of X. Now, when I am pressing on the field of choice and selection, it must pass on the screen (B) but that the choice of the field is choice (X) only one, it is not mobile. Now if, after the addition of the choice of two X and Y, if I select go, it's going to screen B. But when again, the field of choice has 2 options X and Y with X as the default selection. There is therefore no chance for me to choose the X.

  Therefore, I have added a Select called default choice. Now, if X is added, field of choice is the choice of towing display: Select and X. And while choosing X, it moves on the screen B.

  Hopefully now, it is good for understanding.

  And can help me please to this: http://supportforums.blackberry.com/t5/Java-Development/How-to-on-the-Camera-Flash-for-a-long-time-l...

  Thank you.

• Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox

  We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck.  We did a series of works autour and nothing seems to work.

  But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).

  We found this banner of Adobe Edge with video works with all browsers except Firefox unique.

  So far, we tried the following solution.

  What has not worked

  • Move the code of compositionReady edge of Sizmek at the head of the document.
  • Mix video load order in the file edge.js
  • Reduces the size of the video thinking it could be a weight of file problem.

  What worked

  • Deleted the video in the Edge file and have basic animation and it works very well.
  • Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
  • Re-build the banner using only the model Sizmek with greensock and works perfectly.

  Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.

  They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.

  Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ” with Sizmek and Firefox?

  We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")

  
  

  Thanks in advance!
  

  My current configuration of the system: MacPro (end 2013)

  Operating system: OSX Yosemite 10.10.4

  Animated adobe Edge Version: Adobe Edge CC 2015

  Version of Firefox: 38.0.1

  
  

  Here is a preview link:

  http://platform.mediamind.com/Eyeblaster.Preview.Web/default.aspx?previewID=9tJlNivoKiW3dH KTuk0LbbCgEiv2EIykKfVwKNgMDykKfuZrA44UDg % 3D % 3D & AdID = 31080610 & lang = en - us

  
  

  Link of the Adobe Edge sample file:

  Dropbox - 970 x 250-video - standard.zip

  .. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).

  The VGO must be first in the order of the source. I think that this must be done manually in code.

• Drag - move does not work on the first extension

  Hi all

  I'm a new user in Flex. And now, I am trying to create the first plugin.

  -the problem is that I use drag and drop to the desktop application event, works fine, when I debug it to first Extension, access the extension on the creation and the event does not properly.

  The error is Error #1034: Type coercion failed: cannot convert mx.events::DragEvent@7fff8465a19 in mx.events.DragEvent.

  The same two events and already worked in desktop application. Is this a bug or what Miss me?

  Thanks in advance

  Drag-n-drop works fine; See SDKPanel/src/ImportFilesDlg.mxml:handleFileDragStart ().

  I recommend starting a project Panel (based on SDKPanel), then pull in your office room by room application code.

• Any Composition AE (dynamic links) and a text does not appear in the first (CS4)

  I have an AE comp I did with a few credits a few weeks which was 20 seconds ago. Now, I go back to edit it - done long 52 seconds (Comp changed settings), I increased the length of each text box appears a little longer; then I also copy & paste a text layer and put it between the 2nd to last and the last layer of text.

  Then I go and copy/paste about five more layers that all go behind what I had before - in my AE comp I also put the other. I edited all the layers of copied text and type in all that much good.

  I have a background with text on top of that. The background is precomposed and then all text layers in the final composition.

  When I go to the first I see * some * of the changes immediately.

  When I go to the for first now to watch, all changes are applied until the last layer of text I've had since a few weeks ago - including all changes made to these layers as length, font and size, as well as the text layer, I put between the last and the 2nd to the last layer.

  But that's it - once the last layer before is played, no layers of text appear, but the background is perfectly well yet, everything as it should.

  In AE, it plays well and looks great.

  What I am doing wrong? How can show in AE but not first - if the background shows?

  I went to the AE and has one of the layers of this latter text to see what he would do in the body and he hid the background well, but the text still does not appear in the body but in AE.

  Police is still - Adobe Caslon Pro

  My system:

  Windows 7 Pro (64 bit)

  Intel Core i7 980 X 3.33 GHz

  Drive system 750Go

  2 TB disk Media

  12 GB memory

  GeForce GTX 470

  Running Adobe Production Premium CS4

  AE version 9.0.3.8

  Body version 4.2.1

  Any idea would be appreciated!

  Thank you!

  Delmar Penner wrote:

  I changed it to the 3D and moved a few around closer - watched from top, right, left, back... Yes, all the different points of view and could not see anything wrong.

  In fact, the need to use the 3D is not very apparent in this model.  I would use 3D unless there was a reason to do so.

  Delmar Penner wrote:

  ... everything up to "Other credits" do not appear...  I noticed that there is the kind of grid with the blue symbol just in front where I name the layers - what does it means? It's all those who do not have their appearance... Any connection?

  Indeed it is!  Did you by mistake guide layers, not the text layers.  Here is their description:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS3878526689cb91655866c1103906c6dea-7e76 a.html

  .. .and here is more about them:

  http://community.Adobe.com/help/search.html?q=guide%20layer&HL=en_US&LR=en_US&l=AfterEffec ts_product_adobelr & site = aftereffects_cs5_all & auto = 1 & Filter = 0

• Example damper performance report does not properly

  Hello

  I have a problem in the use of edit cell.vi-Word to manipulate several cells in a table to a word document. That makes this vi on my system is to insert the values of the first column in all other columns. See the example for damper Performance report. If I run this report, all values are identical to the first column which I think is not the behavior of this example.

  Don't you see the same behavior or is only on my system?

  I use Word 2010 LV 2013

  best regrads

  URS

  I found the solution through the Solution of the wire and the response of Thoric.

  There seems to be a problem with word 2010.

  You will find the same for loops in "Word_update_table.vi".

  Attached is the vi changed.

• SWF animations works does not properly during export to PDF from InDesign

  I use InDesign CS5 and you have created a document that I want to add interactivity and animations to. I created buttons and page destionations, etc., which all work perfectly when you export to PDF, but the simple animation that I wanted to include do not work. The animations were created in InDesign, then exported as a SWF file and then imported selection placed in InDesign and then exported as an interactive PDF where animations either do not work, have not been picked up or gift does not work as it should. What I am doing wrong, how can I get the animations work properly?

  First of all, if you care about your audience, stop using SWF that has now

  ZERO support on mobile devices.

  However after that make sure that InDesign is fully patched, I would recommend

  Place the SWF file in the PDF file in Acrobat Pro instead.

  Bob

• Clone Stamp does not work during the operation of frequency separation.

  Spacing of the frequencies for the first time by train.  I finished the layer of tone and now works on the texture, but the clone stamp does not work.  I have the linear light value layer and the stamp tool is set to 'active layer '.  The stamp tool is gray in the Middle, as if I were seeing a "high pass sharpening" layer through the center of it.  Tried to save the doc and the reopening, but none here.  Any other ideas?

  -Jeff

  In fact, I restarted Photoshop and it works properly now.  Thanks for the information on how to best to post a question.  I'll remember that next time!