Others become the iTunes update server message connection failed?

Similar Questions

• vSphere HA detected that this host is in a network other than the master vCenter Server is connected

  Hi all

  I try to install a vSphere 5.1 environment (vCenter 5.1 (799731))... It has never been so difficult to get a VMware product running.

  
  Problem:

  As soon as I create a Cluster HA (with 2 ESXi 5.1 (799733)) I get the message:

  "vSphere HA detected that this host is in a network other than the master vCenter Server is connected"

  I tried everything...

  vCenter place in other networks

  Multihomed vCenter

  Place the vCenter in the same network as the ESX host

  Doublechecking ip, subnets, gw, name resolution, vSwitches

  nothing done... is this a bug?

  vCenter and also the two hosts of ESXi now resides in the same L2 network.

  ESX1: 10.254.250.74 255.255.255.0

  ESX2: 10.254.250.77 255.255.255.0

  VC: 10.254.250.29 255.255.255.0

  The message may not be correct.

  Please... @ someone out there... Help! I'm at the end of my knowledge.

  Concerning

  Adrian

  You can check the configuration of VLANS on your physical switch?

  Mike

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Since the Itunes update my video home tab disappeared.

  Since the Itunes update for Mac my home video tab disappeared from Itunes and cannot be restored. Videos that will record video home show in AppleTV under Videos at home but don't show in my Itunes software at all. The result is: I can't remove them from projection on Apple tv once looked. I have to go to the videos folder manually to remove the file, but it still shows under videos on Apple TV. Of course, if I click on it then he can't play the file is not available!

  Why the category of home video is not displayed in itunes?  I tried all sorts of things but am nowhere. I can't even stop Itunes to place the files in the folder of the home video, if I delete the folder it just creates another.

  I removed itunes and reinstalled, even did a factory reset on Apple tv, but nothing helps.

  Hope someone can help please,

  Thank you

  Karen

  Revealing the videos section of the library requires that you discover a menu edit hidden that you have no reason to suspect exists and then display the thing you knew was hidden.

  The word change to the right of the library appears if you move your cursor to the position where it appears.

  

  Click on it to bring up this menu:

  

  And then check the videos:

  

  You can then click done and finally click on videos to see what it contains.

  TT2

• An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  It is one of the many problems that occur on my mac.

  Update of OS X El Capitan 10.11.4?

  1. backup Mac.

  2. install 10.11.4 combo update.

  https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

• Windows Update feature connects to the Windows Update server after the transition from XP to Windows 7 Pro.

  Updated XP PC to Windows 7 Pro 64 bit.  First upgrade failed due to the bad version of Win 7.  (Distorted version of seller).  Correct version relocation has left two versions installed so I started reinstalling the correct version and reformat selected before continuing.  (21/04/16)  Installation proceeds correctly, validated and activated license, but the update function didn't work.  One version on the disc after the previous action.  Then I downloaded and installed IE 11 manually the version 11.0.9600 of Microsoft (same date) and then downloaded and installed MSE from Microsoft 4.9.218.0 version (same date).   MSE updates have not downloaded initially until I ran Win update problems solving.

  I have since run program sfc/scannow (without problems of integrity or repaired files), update Windows utility for troubleshooting and Fixit programs.  I also stopped the update service, delete the appropriate configuration of software and restarted the service records.  Still not connection with update server.

  Download and install the following update manually. This greatly speeds up the update of Windows on new installations of Windows 7.

  Installation and research updates is slow and high utilization of the processor occurs in Windows 7 and Windows Server 2008 R2
  https://support.Microsoft.com/en-us/KB/3102810

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Not available on the software update server

  I am trying to install a printer, and it is getting the error message "Software not available from the update server.  I just got my computer fixed by Apple.  I got a new logic board.  This printer has already been working on OS X L Capitan before my logic board is not crushed.  Someone help please.  Thank you.

  What brand / model of the printer?

• the IPS update server IP

  Hello

  If I want to configure IP addresses for automatic updates, it asked for the ip address of the update server, what is this ip address? This automatic update configuration it takes to update the signature, or is it for other updates?

  concerning

  You cannot point to the Cisco site, you need host your own internal server for this purpose. Personally, I do not use or recommend to upgrades of version in this directory (I think he'll try to apply, if you do). We use the CLI interface for installation of version upgrades. We use the automatic update to install signature updates.

• Do not download the new update, States not connected to Internet

  I recently bought an iPad pro, and the new update is due. I tried several times to do it, but it keeps telling me that it cannot connect to the Internet to do it, once I go through the process agree to the terms. However, I am here, on the internet very well. There is a lot of space, only had this for about a week and no further questions, I noticed.

  Any advice?

  Thank you

  Due to problems with the update on iPad Pro 9.7 ", the update has been removed by Apple for this device.

  If you have several iPad Pro, I would recomment still wait for a newer version.

• Re: Satellite C660 - after the BIOS update can not connect to Internet

  Hello
  I've recently updated my BIOS on my Toshiba Satellite C660 1.70.
  Everything goes well, but when I rebooted and tried to connect to the internet, he could not.

  I thought that there was a temporary error, but it's been 3 months and it has still not repaired.

  Can you help me? Thank you!

  Have you tested with WLAN and LAN connection?
  Have you noticed the same problem using two connections?

• I have an error message "connection failed: unknown username or bad password" when I try to sign int to the administrator account.

  Original title: log on failure

  Whenever I get the administrative password to say update Java, of he always says "connection failed: unknown username or bad password". I know with more certainty that the password is correct. Any help here?

  Sorry if this wrong topic.
  Thank you!

  My account is a regular account. An admin account is active.

  Having only one administrator account puts you in a precarious position because it leaves you with no alternative in case something goes wrong with this unique account. What happens when you try these options:

  • Keep her tapping F8 during startup, and then start safe mode.
  • Keep her tapping F8 during startup, and then start in Repair Mode.

  Can you log in under the admin account in one or two of these cases?

  For how long have you had this problem?

• Between R2 2012 Windows and IBM Http Server SSL connection failed periodically.

  Hi, I have a problem recently. I found that my windows server 2012 R2 has sometimes failed to connect with IBM Http Server ssl. Here it is the information of the two servers:

  1 windows 2012 R2

  -Already activate TLS 1.2 and TLS 1.0

  -Already the latest version of windows update and restart

  IIS - 8.5

  2 IBM Http Server

  -Apache 2.2.31

  -using OpenSSL 1.0.2f

  -Allow TLS1.2 and TLS 1.0

  I also captured network traffic when the two server. If the ssl connection has managed to create. Traffic will be like the following screen:

  

  If the ssl connection was impossible to create, network traffic was like the below:

  

  You will see that the ssl connection failed when the version of the TLS protocol was passed to TLSv1. And returned access denied.  The details of the access denied was like the below:

  

  As the captured screen reproduced above, you will see that the SSL for Client Hello was TLSv1.2 but running on the recording layer TLSv1. this Hello customer was sent by the server r2 windows 2012. I don't know why the ssl connection has been passed to TLSv1 suddenly.

  I found that Microsoft has released an update on January 12, 2016. This fix is the resumption of SSL. Update ID was 3109853 , but I have already applied this update on my server. I tried to do the with the other type of server ssl connection, the ssl connection is possible in a stable condition and has happened the problem I mentioned. Is there someone met this case and resolve it finally?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Dynamic Link Server SOUL connection failed

  All of a sudden having problems with media encoder. If I open a composition of sequels, it will just say the connection to the server dynamic link for awhile and then it says that the connection failed. Ive tried uninstalling and reinstalling and which didn't work either. Help please!

  Caused by both programs (AE and ME) be out of date.