Out of several users on my computer only one can access the internet

Similar Questions

• Windows 7 Pro cannot ping ip addresses are see computers on our network (LAN XP only), but can access the internet.

  All computers have fixed IPS and in the same workgroup, all xp pc can ping and see each other. Only the new windows 7 can not. I stopped the norton firewall and windows firewall 7

  Have you disabled one of the firewall and configured it to allow sharing of files on the local network?

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• XP Home only 2 users can access the internet

  I have a laptop Dell Inspiron 1300 Windows XP sp3.  I'm the only user for a few years until I've added my son as a different user (with administrator privileges).

  I have been using a USB WiFi dongle with success.
  However when my son connects, it cannot access the internet - not even with a link of ethernet wired router to wide band.
  I can ping sites like yahoo.com, but not access via a browser.
  Help, please
  Thank you
  David E.

  Hi David,

  1. what browser do you use to visit Web sites?

  2. If you are using Internet Explorer, then what is the version?

  3. What is the error message when you access a Web site?

  4. what security software is installed on the computer?

  I suggest you try the following steps if you use Internet Explorer to browse.

  Method 1: How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Check if the problem persists.

  Method 2: Create a new user account

  The user account may be damaged and because who you may not have access to the Internet. I suggest to create a new account and check.

  To add a new user to the computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_add_user.mspx?mfr=true

  If the problem does not occur in the new user account, and then transfer the data from the old account to the new account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• How can I find and download Windows XP Service Pack 2 (or higher) to a computer so that I can access the internet by means of a USB adapter wireless?

  I have an old, unused Dell Dimension 8200 desktop with professional MS Windows XP operating system. I am trying to connect wireless to the internet. At the suggestion of Dell, Dell, I bought a Netgear N150 Wireless USB Adapter Ondaaah 1100. When I try to install tp, I get a message that "this OS is not supported. Please install this software on Windows XP (SP2 or later). "So, my request!

  You can get it here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• I lost Firefox off my Computer - no other way to access the internet. How I install it again?

  In the process of pulling up a printer driver which again because my computer won't talk to my printer, I disconnected the e-mail and when I went to get on the internet, yet once he will not otherwise firefox. No other way to get on the internet so it's impossible to download a new version. Other computers in the House can access the internet fine, so routers, etc. are not the problem.

  If you have lost of Firefox, it may already be uninstalled.
  
  The installation program will not require allows you to remove old versions of Firefox because it will install just above them.

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• BlackBerry smartphones "your computer must be connected to the internet to perform this operation" during the synchronization.

  My curve has this error message:

  "your computer must be connected to the internet to perform this operation. Make sure you are able to connect to the internet and try again."

  Worked well with desktop manager 4.6...

  Update 4.7 for explode...

  found an article to fix... regedit and change hklm-software-reasearch in motion-syncronize blackberry\

  change the status from 1 to 0

  has worked well...

  until the 5.0 update...

  now it does not work yet, and this key is no more.

  Of course, there are internet and there are no active firewall or any application that might block this traffic, no proxy settings, routing of questions etc...

  There must be the answer to this question... I know that I'm not the only person having this problem.

  Craig

  Hello

  You only need to connect onve, and then you meet the demand.

  I ran twice and I can't logically explain why it occurs.

  On first installation I finally have the PC connected directly to the cable modem, after disabling the firewall software.

  It took about 6 hours with Kapersky to ensure that he did not get infected. It was a friends DM 4.5

  The second was total frustration with version 4.7. On my network.

  I, like you, have the routers and firewalls in front of the cable router if I had a packet sniffer, it would have been easier to trace.

  I reasoned that the PC and applications like explore and Outlook can access internet with out fail.

  I then followed the gateway IP address for my PC.

  In Windows click on start, then run, then type 'cmd' and press ENTER to open a DOS window.
  -In this window type "ipconfig" and press ENTER.
  -L' display the IP Ethernet the subpattern options, etc..  'Default gateway' is what you need.

  -Copy the IP address of the default gateway.

  Then, I started the Blackberry device manager and open the properties Blackberry icon in the systray.

  I was trying to see if I could find what the Office Manager was trying to access, or at least which way he wanted to.

  I found the Blackberry router configuration tab. Click at the bottom right "activate the bindings defined by the user.

  So basically, you can provide a route to bypass "static route. I entered my gateway address default PC, hit apply and OK.

  I did a cold start system, began the DM and he never moans, simply press on the internet and I couldn't access to the

  synchronization options. It worked without changing the settings of firewall or a router. I deliberately left it in place that that

  Gateway IP worked for another program on my PC. (I have mu PC configuration to device on the home network.

  After constant running for a few weeks, I went and deleted the bypass address. 4.7 installation has yet to miss a

  Beat.

  Well, I broke probably 87 regulations of the FCC, all agreements of the RIM, but it worked for me. !

  If I'm not here tomorrow have a drin for me at the party!

  I just installed the 5.0 Desktop Manager and never had the problem.

  So, basically, it's your call!

  The worst that can happen is it doesn't work and close down more away, the best that happens is that you logged.

  I recommend you do a program of "sniffer". This is the one suggested by Blackberry in the KB article

  (Packet capture tool (for example, Wireshark®))

  Let us know what you think.
  Thank you

  Bifocals

  

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

  When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

  Hello

  Follow these steps to solve the problem.

  
  Step 1
  a. Click Start, default programs
  b. Click set your default programs
  c. Select your browser from the list
  d. Click set this program as default
  e. click OK.

  Then proceed as follows:

  
  Step 2
  a. click settings by default access and computer program Set
  b. click on continue if you see the user account control prompt.
  c. click Customize
  d. Select your browser from the list
  e. click OK.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• How can I keep only one instance of the javafx application at the same time?

  Hello
  How can I keep only one instance of the javafx application at the same time?
  Let not the user run the javafx application is running on your PC.

  Hello. This program does what you want. You can probably find a better solution.

  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.layout.StackPane;
  import javafx.stage.Stage;
  
  import java.io.BufferedReader;
  import java.io.File;
  import java.io.FileReader;
  import java.io.FileNotFoundException;
  import java.io.*;
  import java.nio.channels.FileLock;
  import javafx.application.Platform;
  import javafx.stage.WindowEvent;
  
  public class Simpleapp extends Application {
  
      public static void main(String[] args) {
  
          launch(args);
      }
  
      @Override
      public void start(Stage primaryStage) throws Exception {
  
          final File file = new File("flag");
          final RandomAccessFile randomAccessFile = new RandomAccessFile(file, "rw");
          final FileLock fileLock = randomAccessFile.getChannel().tryLock();
  
          System.out.print(fileLock == null);
          if (fileLock == null) {
              Platform.exit();
          }
  
          primaryStage.setTitle("Hello World!");
          Button btn = new Button();
          btn.setText("Say 'Hello World'");
  
          StackPane root = new StackPane();
          root.getChildren().add(btn);
          primaryStage.setScene(new Scene(root, 300, 250));
  
          primaryStage.setOnCloseRequest(new EventHandler() {
  
              @Override
              public void handle(WindowEvent arg0) {
                  try {
                      fileLock.release();
                      randomAccessFile.close();
                      System.out.println("Closing");
                  } catch (Exception ex) {
                      System.out.print(ex.getMessage());
                  }
  
              }
          });
  
          primaryStage.show();
      }
  }
  

• How can I move my music from iPod to old style to my computer so I can reload the music to a new iPod?

  How can I move my music from iPod to old style to my computer so I can reload the music to a new iPod?

  You should really have your iTunes library on your computer and keep a current backup of it.  iDevices are not designed or adapted for the storage of data in the long term.  See the tips to the user of turingtest2 on recover your iTunes from your iPod or an iOS device for a list of tools and methods (for Windows and Mac) that can be used to copy media from your iPod to your computer.