Out of sync a station with the model of batch process?
Hello
My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.
Thank you!
NTT says:
Doug,
Thanks for your reply.
I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.
Thang
As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.
So, it really depends on what you use this 5th station/thread to find out which method would probably work better.
Hope this helps,
-Doug
Tags: NI Software
Similar Questions
-
Access to information USE testsocket in the model of batch processing
Hello
I have a custom reminder pre-batch TS 4.0, which fills in the serial numbers, part numbers, etc for the DUT being tested (using a model of batch processing). These variables are found in the pre-batch settings. However, I can't understand how to access these values further reminders (SequenceFilePostStepFailure, for example).
In the pre-batch sequence, I can access the serial number for UUT4 using Parameters.ModelData.TestSockets [4]. USE. Serial number. But I can't find the object of ModelData when you don't the pre-batch and tried to look in the root, runstate, hand, sequence, etc., without a bit of luck.
Any thoughts?
Thank you
Chris
You can find it at:
RunState.Root.Parameters.ModelData
There will be only at runtime, and only when you actually run using the model of batch processing.
Hope this helps,
-Doug
-
Model of batch processing is suspended when Windows is locked
I'm running the model of batch processing with 5 Sockets. When the Windows form is locked, the grip of the model after all the test sockets have finished the model batch step titled 'Sync with controller - AfterPostUUT. '. This call is part of the ManagedModelSupport.dll. I have TestStand 2012 SP1 running on Windows Server 2008 R2 SP1.
I have attached a few screenshots.
-
Variable overall station by the object to be measured using a model of batch process
Hello
I have 4 DUT which is tested by using individual ports of com I use global variables Station 4 to store 4 Com ports - COM port assignments are in no particular order and vary depending on the test PC station.
Example:
S1 = Com12
S2 = Com14
S3 = Com10
S4 = Com9
Using a model of batch process I want to test DUT all at the same time: I'm trying to understand what is the best/better way to S1 to S2 for UUT2, UUT1 and so on!
Any help appreciated.
Thank you best regards &,.
Shane.
The easiest way is to use the property Runstate.TestSockets.MyIndex to index a table. Each socket of the batch will get an index (from 0 to n - 1, where n is the number of sockets) when it is created. You can create an array (of strings? I can't tell if you just have channels or need a container) and use the property for the index in the array.
-
just bought a new computer. an old crashed. How can I sync my iphone with the new computer?
Original title: sync
Ask the question in the Apple Forums:
https://discussions.Apple.com/index.jspa -
Hello
Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.
I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?
Thank you
Robert
Hi Robert,.
Thanks for the comments, I logged a bug.
Philippe
-
Audio/video out of sync on netflix - when the laptop is running on battery power
Hello
When you watch netflix on my asus laptop with windows 8, the image and the sound is out of sync. It takes a few minutes before its noticeable, and it is progressively worse if I continue to watch.
I noticed that this never happens if the pc is connected to a charger. If I connect the charger after starting to watch netflix without, the video will go faster until it compensates the difference accumulated upward between the sound and the image.
It started to happen a few times a few months ago, now its everytime I watch netflix. I him have not lived with other video services or streaming - youtube works perfectly fine, as well as a site of Danish online streaming that I use sometimes.
Is there anyone who has any idea what is the cause? I find it very strange, even if its only slightly annoying. Any input would be greatly appreciated!
I apologize in advance for any grammar errors - English is not my first language.
Best regards
Alice
It's worth a try. I suspect that it could be due to energy saving features. There are options within the configuration to be able to change the way the browser handles 'javascript timer frequency' during the execution of a battery, what could be the cause. But quite honestly, I recommend trying the application instead of using the Web site. If it works, it means that you get maintain power efficiency, more enforcement provides a more enhanced Netflix as the site experience, quite a bit more quickly too.
-
Video and Audio out of sync after rendering with SOUL
I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.
But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.
When you need more information to help me, let me know.
Hi Gunther, sorry you have problems with the SOUL. Looks like the sync is correct when exporting directly from the first, is that correct? Also, what format you export to SOUL & first? The problem of synchronization occur even if you export to a different format of the SOUL? You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.
If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.
-
Airport Extreme 802.1N is compatible with the model of iMac 21.5 "2015
I have Airport Extreme 802.1N 3rd generation. Is it compatible with the new 21.5 "iMac 2015 model
Yes, it is, but it will not be able to provide a higher speed "ac" wireless to iMac.
-
This CPU, AMD Phenom II X 6 1035T, will be compatible with the model p6550z.
Looking to update proceesor for the model with the amd phenon II x 6 1035 t p6550z. I want to just make sure that it is compaible...
Hello
It is a machine CTO so very difficult to find the full specs on the HP Web sites. Please check this:
Kind regards.
-
Compilation of Simulink with the model interface toolkit (MIT)
Hello
I am considering using the template Toolkit Interface to Simulink model in the LabVIEW environment. My question is about the process of compiling Simulink. To correctly compile the Simulink model in a DLL and then wrap it with the API from MIT the build process should take place on a machine that has the two LabVIEW Matlab/Simulink AND with MIT?
Which means, is it possible to have Matlab/Simulink, on a single machine (typewriter), a license to some developers (devA) and on another machine (machine B) has a license of LabVIEW, a license to another developer (devB). Portion of the CAN the LV at MIT be installed on computer B and part of Simulink at MIT be installed on the machine as the developer can compile the simulink model in a DLL and then pass to developer B to then wrap it in LabVIEW? Or is the string of tools such as Matlab/Simulink and LabVIEW must be on the same machine. That means, a developer must have these two licenses?
Thank you!
This help document can help you get started with the compilation of a model for use on a target of cRIO VxWorks. You don't need to have your target available for the compilation model, or write your application to MIT. You only need the target to deploy and run the model (obviously).
As described in the help link, you will need to download a compiler appropriate for the compilation of the VxWorks model. A free version of the GCC is linked to this document that you can download. You will need this compiler and the framework subcomponent model of MIT to compile the templates.
-
Layout of Web applications with the model?
Hello!
If I using Business Catalyst and I love it so far! However, I ran into an issue.
I created a Web application and managed to join my site of muse. The list template appears where it must, however, the details template is displayed on a white page (with the contents of the details).
Ive tried it on one of my pages of muse, the {tag_pagecontent} tag and changed the template as a default template, but it doesn't seem to work.
I'm doing something wrong here?
Muse is not yet designed for web applications. You must go to the admin of the BC website. Each element of web application, you can see the drop down menu to choose the model they use. It is likely that you have not chosen model. You can also go to the web application settings and there is a model drop-down list where you can choose which model, by default, every new piece of web application will use because it's the detail view.
-
How to align an apDiv with the model center aligned?
Hello
I am trying to create a website in Adobe Dreamweaver CS4 but made a Web site template in Adobe Fireworks, which was then imported in. My model was then aligned with the apDivs placed on it containing all the images/links/rolloevers etc.
When I saw my Web site in the browser; the apDivs were all to the left while the model was at the Center.
Anyone know how I can make aligned my apDiv in the center of the page so that they are in the right place on the model?
Thank you
Try this
http://www.fionasansom.com/assets/how_to_center/centre_in_browser.html
I hope this helps.
-
How to insert a table in rtf model that already has a table... When I try to insert the table display to the left of the report when I find out.
I want to display the table exactly where I put it.If you want both of your tables to align, you can think that they in the same table, but in different lines.
And conditionally turn the grid will depend on the number of columns to display in the second row. -
Need help with the model number.
OK I clearly did something wrong with setting up my first model within DW. I created a page full index and is a model. I did it because other then the two part main content area. My site will remain substantially the same from one page to another. If everything was going ok at first. I had my model appear on the start page as it should. Then, I went and created a group of pages. I quickly realized that all changes I made where the happingin across all pages. Except for the text, for some reason any. If I removed a div or a background image, it changed in all areas. Then, I went back to the start page and noticed that I missed an option that says: you want to save the content of the pages. Décliqués the box and I thought I solved the problem. I then noticed that nothing has changed. I have problem that seems to happen every time I have to create a page that might be the problem. Any time I try to save a page in html, I get a box that appears every time. The following document uses this file not on the site. He then shows the main.css file. I then click on him and he copys above. Then, I lost half of my page content. my main.css file is in a seprate folder. I'm clearly one and was part of the creation of my index template.
This is why I do not work with models. Unless you properly define the editable regions, what you do in the main model will arrive at the same place on every page that you create from the template.
Better to create a straight html page and call the template.html, then use it as the page from which you create and save the rest of your site in my humble OPINION.
There are others who swear by the models, but I built nearly 500 sites and one never made it with a model. It has caused me so much headache I dropped it before I have made and never looked back.
Maybe you are looking for
-
iPhone's lights when I tilt it
When I switch my be the iphone to the left, he turns how can I stop this
-
tvOS 9.2.2 update does not try again later?
Trying to manually update tvOS 9.2.2 but receive error message "the update was not successful try again later" have tried repeatedly with the same error. Current version of s/w on APPLETV (gen 4) is 9.2.1. Any suggestions as to why this happens?
-
iCloud Frustration of storage limit
Recently received this warning on iPhone. A through the settings and turned off almost all my backups of the app. Photos down to < 500M. Always get warnings. Am I missing something obvious? I agree with Apple music. It uses storage iCloud? Not seeing
-
Y at - it a shortcut to return to the previous folder seen?
If I check messages in a folder, then move the content to a different folder, is there a shortcut to return to the first folder?
-
Mini iPad IOS 9,31 I have a "Ghost" icon (library of Panasonic). Not sure why there is a problem in the first place, although the Apple software updated recently, so maybe it's the first cause. I tried the following Hot and cold reboot with or withou