outbrain on ios traffic

Similar Questions

• Routing of SSL traffic on two firewalls

  Hello

  I have HT an ASA face internet and destined for SSL connections. Behind the ASA I IOS Firewall that hosts servers must be accessed through the SSL provided by the asa

  The issue im having is: Users SSL Vett ends at the ASA fine, after that when I pass this traffic and in the firewall IOS, traffic does not reach the destination servers.   Newspapers in ios FW watch suite msg "Crypto packages re - CVD is not crypto IPSEC package"

  Please help me how to get these traffic routed via the ssl Protocol on the asa in the ios firewall

  I suppose it's possible you an IPSec VPN configured on the IOS Firewall including encryption field includes the one used by the SSL VPN client.

  The IOS Firewall has any IPSec VPN configured?

• Engineering traffic graphic counter - iphone ios 10.0.1 problem 6 s

  Help, please

  The graph of traffic in IOS 10.0.1 meter is broken and not recognized.

  Y at - it an update for this application?

  No thanks! It will be fixed in the next update. However, we have no ETA for when.

  But it has already been mentioned.

• NETGEAR genius App does not display the numbers of traffic correctly with IOS 10 meter

  Since I've updated my Air Ipad 2 and Iphone 5 IOS 10.0.1, genius app on these 2 devices does not traffic counters numbers - the numbers are blacked out. Both devices have been updated to IOS 10.0.2 and numbers still are not displayed correctly. I've uninstalled and reinstalled the app on devices engineering and numbers are always blocked. I tried an old Ipad 2 which is not updated for IOS 10 and my desktop Windows 10 PC and the traffic engineering counter displays the numbers correctly. I called Netgear support, but they were not aware of this problem and so far do not have a solution. Someone has encountered this problem on their Apple devices? Thank you! Another question - is - it possible through the genius app for what it tell me the amount of use of band bandwidth/data device not only in total for all devices? Thanks again!

  Hey all

  I have forwarded this to our engineering team.

  There was another user who made the same case.

• Traffic generated by router IOS inspect IPv6

  I try to configure the IPv6 packets on a router 2911 deep inspection (IOS 15.1 (2) T5) but I'm not able to inspect the traffic generated by router. It is not an option "ipv6 inspect name xxxx udp router-traffic' as in IPv4. So I am unable to ping to the router to a remote host.

  I could solve the problem of ping by simply adding a "permit any any icmp echo response" on my ACL, but I still can't access TCP or UDP based services (DNS, HTTP,...).

  Anyone knows if it is possible to activate the traffic generated by IPv6 router, or is there another solution for this problem? If so, how can I do that?

  Partial configuration:

  ipv6 unicast-routing
  
  ipv6 inspect name SPI_DIALER1_OUT tcpipv6 inspect name SPI_DIALER1_OUT udpipv6 inspect name SPI_DIALER1_OUT icmpipv6 inspect name SPI_DIALER1_OUT ftp

  interface Dialer1 ipv6 inspect SPI_DIALER1_OUT out ipv6 traffic-filter acl6_dialer1_in in

  ipv6 access-list acl6_dialer1_in sequence 10 permit icmp any any nd-ns sequence 20 permit icmp any any nd-na sequence 30 permit icmp any any router-advertisement sequence 40 permit icmp any any echo-reply deny ipv6 any any log

  Former Cisco's IOS 'inspect' system has indeed been deprecated.  You should use zone based firewall now.

  Here is the guide for the care of the IPv6 zone based firewall.

  http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/sec_data_zbf/configuration/XE-3s/sec-data-ZBF-XE-book/sec-ZBF-IPv6.html

  If you want to go at a faster speed for the area based ipv4 firewall, try to use my Config Wizard and copy the bits you need.

  http://www.IFM.NET.nz/cookbooks/890-ISR-Wizard.html

• Traffic to the VPN router IOS NAT tunnel

  I need to configure a VPN tunnel that NATs traffic above him.  I have already established VPN tunnels and NAT traffic.  I did this on a concentrator VPN and ASA, but have seen some places where people say is not possible on a router or I saw real hard evidence that it is.  For example, I use a Cisco 2801 router with 12.4(8a) and advanced security.  This can be quite difficult as the subnet / vlan that we need NAT needs to pass normal traffic on other VPN tunnels and using a NAT on the Internet directly.  Y does it have, any restrictions on it as the IOS version, being a router itself, NAT configuration.  Any help is greatly appreciated.

  Hi James,

  NAT VPN traffic, you can like you do with ASAs on IOS routers.

  If you do, it is that you create an ACL to set traffic to be coordinated, apply the ACL to a NAT rule and a condition that NAT statement with a roadmap to occur only when the traffic will be sent through the tunnel.

  Federico.

• SSL VPN on IOS but no traffic

  Dear score

  I configured SSL VPN on c3845. WebVPN working via browser but through webvpn client I am able to connect but can not reach an internal with ip address on the network. Please find the show for your reference

  Check your 'ip nat inside' list 1 and make sure that you're not VPN traffic to be NATted

  -heather

• iOS 10 frequent story location empty

  Hi all

  I've been on ios 10 for awhile now since its release and so far my common history is empty.

  All services of relevant sites are able, I even reset the parameters of location etc, without success. I did a restore, still nothing.  My phone used also pick up where my car is parked more, given that even this setting has been activated.

  All the similar location based services like traffic conditions worked fine on ios 9.

  Now, I ran out of options.

  Hoping someone can help.

  How long usually would it take for common to show history.

  6 iPhone on ios 10.0.2

  Anyone?

• Problems with the feature 'Parked' (iOS 10 cards)

  I have upgraded to iOS 10 on my iPhone 5 yesterday. I can't get the car parked cards function to work.

  I activated the following:

  -All maps Apple Notification options

  -Location services of maps (when using). 'Always', is not available as an option.

  -System Services: Common places

  -System services: Routing and traffic

  -System services: improve maps

  My phone connects via Bluetooth to my car handsfree system. Is it not carplay.

  What I am doing wrong? Thanks in advance!

  I have the same problem with an iPhone 6. Try the general > reset > all settings, and then re-pair your phone to your car and see if it works now.

  He has not set a mine, but that is what Apple recommended.

• Web error: traffic blocked due to exceed the quota of session

  I have a problem with access to the internet. I don't know if I am posting this in the category right forum or not.

  Since last week I have been sporadically do the following random error message when going online. It will come when trying to access a Web page, but he seems to have nothing to do with the page itself. He rides on a wide variety of Web pages.

  

  "Blocked traffic due to exceed quota of session IP shaper. Please contact the system administrator. Your session quota is: 512, more traffic will be blocked. »

  I get this message on both my computer and on the iPad for my husband. Usually, if I refresh the page, the Web page originally, I was trying to go to load. But sometimes this error message will just continue to flow to the top when I try to reload the page.

  I use a MacBook Pro of the retina, OS X El Capitan, 10.11.4, Safari 9.1 version. IPad for my husband is a Mini iPad start (I don't know exactly what we) running latest iOS, I think 9.3.1 and Atomic web browser.

  I tried to do a search online for other people with this same problem and I found a lot of different complaints, but they were all in different languages from around the world. And none of them had real fixes. The only English and even made any sense is here: ause-of-exceed-per-ip-shaper-session http://superuser.com/questions/550362/http-requests-met-with-traffic-blocked-bec. But it doesn't really say how to solve this problem.

  I plan to call my ISP tomorrow morning, but I really don't see how this problem would be on their part I use Dish internet Network satellite. She has a monthly quota of data, but I have access to my use, and is not the problem. Indeed, my fair use reset for the month yesterday, but I still get this message. In addition, the grammar is odd in this error message, and it does not resemble a flat view. Something to suggest in my internet connection. And it is on many devices in my home and disrupts the use of the internet for my and my family.

  Trying to Resti.

  I'd appreciate really any ideas on what it is and how to fix it. Thank you.

  So, I called dish, my ISP, Friday, and no one there had heard of this problem. Their only suggestion was to connect my modem directly to my computer without going through the router and see if I have the problem persists, in order to see if the problem with my AirPort Extreme. Unfortunately, my computer, a MacBook Pro of the retina, lacks an ethernet port.

  I'm at a complete loss what to do about it, it's getting slowly worse and come more often. Does anyone have any suggestions?

• Siri has stopped running iPhone iOS 9 6 s

  Siri has stopped working does not detect the voice or dictation are all assets have reset and always updated and restored does not work iPhone iOS 9 6 s

  I had a similar problem - turns out be the network (WiFi) that I was on. I turned off WiFi and Siri started working again. Looks like my company network is filtering or blocking traffic Siri

• 2 WAE WCCP l2 only 1 gets traffic

  Hello

  I have 1 router WAN and 2 devices configured in WCCP. The configuration works very well except that only the first WAVE that sees the router and set the WCCP receives traffic. What I mean is that the two waves see the router and vice versa. When I set the WCCP link, the first WAVE to his establishment becomes WAE DRIVING and another doesn't get it packages. If I disconnect the WAE lead or change its configuration WCCP and put again, WCCP switches the other WAE and the other is now exclusevly receiving traffic. No load balancing is reached.

  First of all here is my configuration:

  1 router WAN Cisco ISR G2 2911 IOS 15.2 (1) T

  WAAS in WAVE-274 cisco 2 version 4.3.3 configured in the same way for WCCP.

  Router IP: 10.x.y.1/22

  WAVE IPs: 10.x.y.9 and 10.x.y.7 22 and default gateway is the router 10.x.y.1

  Users are on the same network 10.x.y.0/22 (is that a problem? I read in a WAAS setup guide the WAE cannot be in the same network as the users)

  Second, here is the relevant config:

  Router:
  

  IP cef

  WCCP IP 61

  WCCP IP 62

  interface GigabitEthernet0/0

  Description * LAN connection *.

  61 IP wccp redirect in

  IP addr 10.x.y.1 255.255.252.0

  !

  interface GigabitEthernet0/1

  Description * WAN connection *.

  62 IP wccp redirect in

  addr IP WAN_IP...

  !

  WAAS:
  

  primary-interface GigabitEthernet 1/0

  interface GigabitEthernet 1/0

  IP address 10.x.y.9 255.255.252.0 (et.7 during the second WAVE)

  !

  interface InlineGroup 1/1

  Shutdown

  !

  WCCP router-list 1 10.x.y.1

  WCCP promiscuity of tcp router-list-num 1 redirect l2 l2-back

  WCCP version 2

  When I do the following on the router:

  show ip wccp 61 detail

  or see the ip wccp 62 retail

  I see:

  The WCCP customer information:

  WCCP Client ID: 10.x.y.7

  Protocol Version: 2.0

  Status: usable

  Redirect: L2

  Package return: L2

  Assignment: HASH

  Initial hash Info: 00000000000000000000000000000000

  FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

  Assigned hash of information: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

  00000000000000000000000000000000

  Allocation of hash: 128 (50.00%)

  S/w redirected packets: 103912
  

  Connection time: 03:34:05

  GRE has bypassed the packages

  Process: 0

  CEF:                   0

  Errors: 0

  WCCP Client ID: 10.x.y.9

  Protocol Version: 2.0

  Status: usable

  Redirect: L2

  Package return: L2

  Assignment: HASH

  Initial hash of information: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

  00000000000000000000000000000000

  Assigned to Hash Info: 00000000000000000000000000000000

  FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

  Allocation of hash: 128 (50.00%)

  S/w redirected packets: 0
  

  Connection time: 01:46:24

  GRE has bypassed the packages

  Process: 0

  CEF:                   0

  Errors: 0

  On the WAAS, settings of assignment of WCCP for load balancing is the default: hash. (Hash on Source IP (Service, 61) :))

  the method of evacuation is IP forwarding

  I have multiple connections from different source IP addresses and somehow they all end up on the same WAE axe:

  ConnID Source IP: IP port: port Dest PeerID Accel RR

  360 10.x.y.3:49463 10.q.w.36:52732 XX TMDL 16.1%

  373 10.x.y.4:55005 10.q.w.36:52732 XX TMDL 24.8%

  I checked several places and read the best practices; support for router platform... and it seems that the config is OK

  http://www.Cisco.com/en/us/prod/collateral/contnetw/ps5680/ps6870/white_paper_c11-608042.html

  Any ideas?

  Thank you

  Patrick

  
  

  That question has been in the session 'ask the expert ':

  https://supportforums.Cisco.com/message/3482826

• How to check an ACL is used or not in the IOS

  Hi guys,.

  Do you know there is a command or delicate way to check if an access list (e.g. access-list 1) is used by any route-map, interface, etc. in the configuration?

  I have Catalyst 6509 s with IOS version 12.2 (18) SXF7

  Thank you in advance.

  There is no such built-in command. But you can use pipes and filters to find where the acls are applied. For exaple the command will show ACL on interfaces:

  interface ip Show | include returns | is administratively. is down. The outgoing | Incoming traffic

• IDS FW IOS Audit abandonment HTTPS

  Hello

  I have a performer 12.3.7 - T8 code 2651XM router that a is configured as a FW IOS. There is a public NAT entry for an OWA server. If I activate the djamel signatures entering on the WAN interface, I can not connect to OWA using HTTPS server. No signature alert, but you get an HTTPS connection to this port. In IE 6 the page just times out, but in Mozilla, you get the message 'xxx connection ended unexpectedly. Some data has been transferred "."

  Someone had problems with FW IOS using HTTPS connections?

  Thank you

  You're probably hitting CSCee54516 (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCee54516&Submit=Search).

  This bug says it's on a 831 but this is a duplicate of another much bigger bug that touched essentially all incoming traffic through all routers when 'intellectual property audit' has been enabled. Click the link for the duplicate bug and see the fixed versions.

• Example of signature custom IOS IPS devices.

  Hello.

  Does anyone know a simple example to configure and test the custom signature of the IDS MC feature in IOS IPS devices?

  I searched for this topic, and I found an example of detection device about set an alarm when telnet is detected, but I didn t can do in Device IOS IPS because that was not the same parameters.

  Thank you.

  IOS IPS work on traffic that flows THROUGH the router, and not on the traffic flowing on or THE router.

  You should try to telnet to a device through the other side of the router instead of the interface of the router. Also an interface through the IOS IPS interface is not enough as IOS IPS does not work as an ID of sniffing traffic on the local network segment. Traffic must flow through the router.