Outbreak of similar PCI-6251 reference edge does not work with two channels?
I use this card PCI-6251 to acquire data from two channles of entry. I need to use reference similar edge trigger. the trigger for the chan signal 1 and acquire data from chan 1 and 2 chan. However, the error is that this card can't take two channels with similar trigger edge reference. Please check if it's the PCI-6251 limilation. If so, can you suggest any other card can do this work? The normal extent can trigger from one channel and acquire data from many other channels.
Thank you
Liming
Tags: NI Software
Similar Questions
-
Need password on wake up does not work with two monitors
I use a laptop with a second monitor attached. I have the settings set to sleep when I close the lid, and then request a password on the reactivation. He does not sleep, and if the second monitor, but when I open again the cover, it does not require a password. It works fine when I don't use the other monitor, so I don't know what the problem is. Any ideas?
Hello
1. it worked before?
2. how to connect the second monitor? What is an extended display?
3. what happens when you wake the computer from sleep mode? Are you able to look at the screen in the second monitor and the laptop successfully?
4. What is the brand and model of the computer?
Method 1:
I suggest to turn off the prompt for password then that sleep and you can reconfigure the second track again and check.
Method 2:
If the problem persists, update the card graphics card and see if it helps.
See the links below for more details on the update of drivers:Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyUpdate drivers: recommended linksHope this information helps. -
OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8
OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8. I tried to reload of apple and HP. My drivers and software are up to date. I tried to scan from preview, Capture and print browser.
It worked finally.
Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard? I couldn't find one for 10.5 or 10.6 Leopard. I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar. I found if I used the full program for Macbook Pro 10.6 Leopard I could scan. The fax appeared to be installed via blue tooth. I have not faxed anything, but it has been tested during the installation of the program. Complete program of the HP I can't print. I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print. It is the only way that I could make use of my HP printer, scanner and fax. Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro. I appreciate the help. Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.
-
I just noticed that my code (in my blog site), which is a regular code that allows the image to transform into its form in grayscale and cast its original color, does not work with the Mozilla Firefox browser. But with other browsers, it works. I hope you can help me with this little problem. Thank you!
Should I use a CSS rule that is similar to:
filter: grayscale(100%)
This property is not yet implemented in Firefox. It is supposed to be implemented in Firefox 34, according to https://developer.mozilla.org/en-US/docs/Web/CSS/filter
-
How can I get a previous version of Firefox. 17 Firefox does not work with online banking
How can I get a previous version of Firefox. 17 Firefox does not work with banking online edit
Similarly I cannot now (with v 17) start a download from a Web site to Quicken. At least it seems with four different financial institutions, I've tried. Each of them worked before version 17. I am now on 17.0.1 so that does not solve the problem.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
Windows Vista does not work with modem wireless broadband
I saw no answer to this problem. Can anyone help?
Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G. The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless. Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.
Summary:
Vista / Netgear wired - work
Vista / Netgear wireless - does not work
XP / Netgear wireless - workI went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop. I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft. I am convinced that it has something to do with Vista. Any ideas?
Hi jhandcc,
Please provide the complete error message you receive.
Step 1: You can follow the steps described in the article below
Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to"
" "»http://support.Microsoft.com/kb/948180
If the problem persists,
Step 2: Download and install the latest service pack for windows vista on the computer
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/
Reference:
You cannot connect to a wireless network on a Windows Vista-based computer
http://support.Microsoft.com/kb/935222
For more information, see the link below
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Let us know if this helps
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Bluetooth headset does not work with Windows 7 - device is detected.
I have a Dell XPS 1530, which had Vista 32 bit running. I have recently upgraded to Windows 7 Ultimate. Ever after that the Bluetooth of DELL BH 200 headset does not work with my laptop.
The bluetooth adapter and the device is fine since I'm able to search and find all bluetooth devices, including my helmet. However, I get a yellow exclamation on the headset under devices. The headset can be paired with other devices such as my mobile and works very well.
I tried to update the drivers and reinstall the device and the adapter from the Device Manager. We have a similar setup on my brother's computer and it works fine.
Another thing to watch, would be what battery is used. I know from personal exp some devices work with Toshiba stack, vs the MSFT pile up. Do a search and see if anyone else uses a different battery with these devices. Network systems engineer * Zvetco biometrics * Windows Server 2008 R2 * Core 2 6600 @ 3.30 GHz * 16 GIGS RAM * NVIDIA 9400GT * * > please VOTE MESSAGES ALSO USEFUL TO HELP OTHER USERS
-
How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?
It should do. You use one of the buttons of pen maybe? Just touching wheels with the pen with no buttons or modifier keys. Press ENTER to close the selection.
Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool. I also use the mouse instead of the Tablet for the selection of cutting edge. It is a little too uncertain where the point will go when hovering the stylus above the image.
-
It does not work with macbook air 2008! What should I do?
It does not work with the macbook air 2008 os x 10.5.8. What should I do?
What does not work?
More details please!
-
I installed the new iCloud (v5.2.1.69) and found that it does not work with Outlook 2016 (16.0.6965.2053). There is no button "Options"... "to"Mail, Contacts, calendars and tasks"(see photo). In addition, the iCloud Outlook add-in does not display in Outlook. I tried to reinstall the Office 365 and iCloud, but nothing has changed.
I have exactly the same problem with the latest version of iCloud. I have Outlook 2016 and 10 Windows and when I try to install iCloud there saying "set up" next "Mail, Contacts, calendars and tasks. I left it for hours and it does not go beyond this point. Outlook displays the listed add-in but it is not doing anything. I tried to remove all of the Apple software, and then reinstall iCloud without result. I've deleted and reinstalled MS Office and then tried to reinstall iCloud - once again no luck.
-
keyconfig does not work with FF 24.0. Is there a way?
I just finished rebuilding my PC from a hard drive format. In doing so, I loaded the last 24.0 FF.
Part of my essential app is a script used keyconfig causes a single copy to send the source page to the Clipboard, where the script analysis. Unfortunately, keyconfig does not work with FF 24.0.Writing for easy copy begins to explain how acting on a combination of keys, rather than the action of the mouse, without the use of keycopy - but then told how he has no need, because it's too much effort, and besides - keyconfig exists and does the job - which, I agree, he used, very well - but it is no more.
What should do? If there is no other way, can I get a downgrade of FF that works with keyconfig?
There is a new add-on, key config (note the space), but it does not what keyconfig did.
The end of the thread main support doesn't mention a major problem in Firefox 24: keyconfig 20110522 - mozillaZine Forums.
Did you install from source: http://mozilla.dorando.at/keyconfig.xpi
Is the problem that Firefox won't let you activate keyconfig, but the dialog box opens, or you can activate or extension allows you to create shortcuts but they do not work?
-
I have a mac 10.5.8 software. I downloaded moxilla firefox 24 and has replaced the old version to download. Then I got a message that firefox 24 does not work with my software. How to bring back the old version?
Hello patcouse, if you want to stay with you older version of the OS, then firefox 16 is the last version available that will run in this environment. for a download link, please refer to the Firefox no longer works with Mac OS X 10.5 (at the end of the article).
-
The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro
Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.
I thank in advance.
~ Mike
I have my doubts that the (10.11.5) software is the problem. Are you sure that the DVD player is simply not defective? Have you tried to clean the lens? What is the State of the disc?
Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.
Ciao.
-
SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?
Update Firefox 23.0 which published yesterday afternoon.
Maybe you are looking for
-
How many years of guarantee?
Toshiba Qosmio G30-211 SN 37801820GHow all the same guarantee? When you buy a laptop on this site is written in 3 years in service center say 2 years. More please answer the important question for me! (1) with what the serial number of the motherboar
-
I bought my Apple Mac Book Pro and all the goodies to go with it while I'm deployed in June 2015 and I love it. However he just died last week and will not turn on - no pre-impact damage or issues. I called Apple support troubleshooting. They have be
-
Too light to read the printer output.
Most of the documents to print OK. However, answer box indications on labels printing is too light to read.
-
My better half is not in computer science and has no desire to become. I have too many movies and want to set up my HTPC as a giant DVD player only. I load movies and play movies. What are the absolute minimum services required for windows 7 to run (
-
Simple question vSphere replication NAS/SAN
We have two remote sites running vSphere and our main office, also running vSphere. We think of you use vSphere replication to provide a DR solution for two of our critical applications in these remote sites. One of these applications is running on