Outgoing NAT does not not for a VPN L2L
We have an ASA5510 which has two LAN to LAN IPSEC VPN configured. VPN tunnels themselves are on the rise and a VPN works great. But the other VPN is not working properly the outgoing NAT traffic (inbound is very well of all the VPN endpoints). When I ping from the ASA using 'ping inside the 10.200.4.x', it works. When I ping from a box sitting inside the subnet I get the following error in the ASA logs:
failed to create translation portmap for udp src inside:10.26.32.2/137 dst outside:10.200.4.x/137
I would really appreciate if someone could tell what I did wrong with the NAT or routing configuration. This is the first time I setup two L2L VPN on a SAA. The relevant parts of the configuration below, are properly anonymized.
Edit: I forgot to mention that, once it works I need then for the inbound NAT to web.server.public.ip to 10.26.32.2 and add ACL entries for www and https.
Thank you
Matt.
interface Ethernet0/0
nameif outside
security-level 0
IP 1.2.3.33 255.255.255.248
!
interface Ethernet0/2
nameif inside
security-level 100
IP 10.26.32.1 255.255.255.0
!
interface Management0/0
nameif management
security-level 100
IP 192.168.61.1 255.255.255.0
management only
!
access extensive list ip 10.26.32.0 outside_1_cryptomap_1 allow 255.255.255.0 192.168.0.0 255.255.0.0
access extensive list ip 10.26.32.0 outside_20_cryptomap_1 allow 255.255.255.0 10.200.4.0 255.255.255.0
ICMP allow any inside
ARP timeout 14400
NAT (inside) 0-list of access outside_1_cryptomap_1
NAT (inside) 1 access-list outside_20_cryptomap_1
NAT (inside) 2 0.0.0.0 0.0.0.0
Route outside 10.200.4.0 255.255.255.0 broken.vpn.endpoint.ip 1
Route outside 0.0.0.0 0.0.0.0 gateway.ip.address.here 1
Route outside 192.168.0.0 255.255.0.0 working.vpn.endpoint.ip 1
the ssh LOCAL console AAA authentication
http 192.168.61.0 255.255.255.0 management
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-SHA-256 aes-256-esp esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 1 match address outside_1_cryptomap_1
card crypto outside_map 1 set pfs
card crypto outside_map 1 set working.vpn.endpoint.ip counterpart
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
card crypto outside_map 20 match address outside_20_cryptomap_1
card crypto outside_map 20 set pfs
card crypto outside_map 20 peers set broken.vpn.endpoint.ip
outside_map crypto 20 card value transform-set ESP-SHA-256
life safety association set card crypto outside_map 20 28800 seconds
card crypto outside_map 20 set security-association life kilobytes 4608000
outside_map interface card crypto outside
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 aes-256 encryption
ISAKMP policy 20 chopping sha
20 5 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
ISAKMP nat-traversal 20
tunnel-group working.vpn.endpoint.ip type ipsec-l2l
working.VPN.endpoint.IP Group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group broken.vpn.endpoint.ip type ipsec-l2l
broken.VPN.endpoint.IP Group of tunnel ipsec-attributes
pre-shared-key *.
Telnet timeout 5
Console timeout 0
management-access inside
192.168.61.2 management - dhcpd addresses 192.168.61.254
dhcpd lease 3600
dhcpd ping_timeout 50
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
These 2 lines are incorrect. The list of access crypto-list and you should not only applied to the NAT statement.
NAT (inside) 0-list of access outside_1_cryptomap_1
NAT (inside) 1 access-list outside_20_cryptomap_1
Please remove the 2 statements of NAT above, but keep the access list because those that are applied to the card encryption.
Then you must configure the following:
10.26.32.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
IP 10.26.32.0 allow Access-list extended sheep 255.255.255.0 10.200.4.0 255.255.255.0
NAT (inside) 0 access-list sheep
Once the changes above, pls make "clear xlate.
Hope that helps.
Tags: Cisco Security
Similar Questions
-
.. . Only receive them. It worked until a couple of days. A diagnostic test says ' outgoing server does not... He asks me to return my password... I have are about running a new diagnosis and said "everything is now functional... but always coming out does not work."
original title: using OUTLOOK EXPRESS I can no longer send emailsRemove your e-mail account, close OE and then reopen it and add your account to mail back again and see if that fixes things. If this isn't the case, then some diagnostic test you run must also explain that you can not control the SMTP server yourself, and if he has any questions, then you should contact the vendor of the SMTP server.
Steve
-
INTERNET does not immediately work VPN
Hello
I've been working to resolve the problem on the network of vpn cisco eazy extented for a week. While the VPN is connected internet does not work, I thought it was the remote side, now I think it might be because secondary server configuration question I try serveral on-site the same configuration for the remote side internet is getting lost for the user. still can ping 4.2.2.2 for the router itself. Please help me solve this problem.,.
Router config HO
!
!
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
!
AAA - the id of the joint session
iomem 15 memory size
IP cef
!
!
!
!!
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
Configuration group social isakmp crypto-seat customer
pass123 keys
pool ippool
ACL 101
Save-password
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
market arriere-route
!
!
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
!
!
!
!
!
!
interface FastEthernet0/0
IP address xx.xx.xx.xy 255.255.255.248
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly
route IP cache flow
automatic duplex
automatic speed
clientmap card crypto
!
interface FastEthernet0/1
192.168.0.166-IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
local pool IP 10.10.10.10 ippool 10.10.10.200
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 xx.xx.xx.yx
!IP http server
IP http secure server
The dns server IP
overload of IP nat inside source list 111 interface FastEthernet0/0
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 10.200.192.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 10.172.16.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 104. allow ip 192.168.0.0 0.0.0.255 any
access-list 104. allow ip 192.168.0.0 0.0.0.255 any what newspaper
access-list 111 deny ip host 192.168.0.16 everything
access-list 111 deny ip host 192.168.0.16 no matter what paper
access-list 111 deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
access-list 111 deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255 connect
access-list 111 deny ip 192.168.0.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 111 deny ip 192.168.0.0 0.0.0.255 10.200.192.0 0.0.0.255
access-list 111 deny ip 192.168.0.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 111 deny ip 192.168.0.0 0.0.0.255 10.172.16.0 0.0.0.255
access-list 111 deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255
access ip-list 111 allow a whole
access-list 133 deny ip host 192.168.0.16 10.10.10.0 0.0.0.255
!Remote Desktop
Router #show run
Building configuration...Current configuration: 2243 bytes
!
! Last modification of the configuration at 08:34:12 UTC kills Sep 18 2012
! NVRAM config updated at 08:34:14 UTC killed Sep 18 2012
! NVRAM config updated at 08:34:14 UTC killed Sep 18 2012
version 15.1
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Select the secret 4 6Uhgk1ATmwo4j3eoSZScCqsB/Q1llvengtFuqfN8mh6
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization network default local
!
!
!
!
!
AAA - the id of the joint session
!
iomem 10 memory size
Crypto pki token removal timeout default 0
!
!
IP source-route
!
!
!
!
!
IP cef
M name server IP
M name server IP
No ipv6 cef
!
!
!
0 user username password Cisco
!
!
!
!
VDSL controller 0
!
!
!
!
!
!
!
Crypto ipsec VPN-REMOTE-OFFICE ezvpn client
connect auto
Group seat key pass123 social
network extension mode
XX.XX.XX.xy peer
user username password Cisco
xauth userid local mode
!
!
!
!
!
!
interface Ethernet0
no ip address
Shutdown
no fair queue
!
ATM0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0.1
PVC 8/35
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Vlan1
IP 10.200.192.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
ezvpn client crypto ipsec VPN-DESKTOP-remote CONTROL inside
!
interface Dialer0
the negotiated IP address
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP chap hostname xxxxxxx
PPP chap password 0 yyyyy
Crypto ipsec VPN-REMOTE-OFFICE ezvpn client
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
The dns server IP
overload of IP nat inside source list 120 interface Dialer0
IP route 0.0.0.0 0.0.0.0 Dialer0
!
access-list 120 deny ip 10.200.192.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 120 allow ip 10.200.192.0 0.0.0.255 anyNote: no problem when you use a VPN clinet software
Looks like you're hit this bug: CSCtj63428:
You can change the configuration of the Easy VPN NEM mode just the VPN LAN-to-LAN tunnel, or demote according to listed in the bug workaround solution to solve the problem.
-
Incoming and outgoing mail does not work in Exchange 2
* Original title: incoming & outgoing does not work.
I have two exchange server 2010 clustered 2008r2. Roles of Hub, mailbox covers & CASE install the two exchange Server. My EX1 works well, but I put you in my mail EX2 flow another then my incoming & outgoing do not post able to send. & No delivery received no message.
but my OWA opens on the desktop side & could check e-mail. but I'm trying to send e-mail can it save in the project automatically.
I have check all replication & health spent.
all the services of exchange server is running.
If I stop my EX1 server so no queue to show in return EX2.
Hello
Your question is beyond the scope of this community.
I suggest that repost you your Question in Exchange for TechNet Forums.
https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer
Or here:
https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral
TechNet Server forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.
All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.
I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.
Hello
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
__________________________________________________________________
Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
This will remove not essential info unless you check the box "delete all my personal data too.
Please report back to see if this helped you!
Thank you.
-
Satellite A100: webcam works does not for windows live messenger on Vista
I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
I also bought an external webcam, and it does not work either.When I go to Device Manager it says that the two cams don't work properly.
I tried to update the drivers but they are up-to-date.
I wonder if it's a problem of Windows live or Toshiba.
I use Windows Vista Home Premium and the new version of messenger.> I also bought an external webcam and it doesn t work either.
> When I go to Device Manager it says that the two cams don't work properlyFor me, it looks like a windows system problem.
Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
Maybe something confused keys registry or files may be some updates to update or similarIn your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
If the webcam will be functions then you could install the windows live messenger again. -
Want Dv6 - 7300st: finger print works does not for Windows 10
Hello
I've updated 10 64-BIT windows. then after I find, validity wbf ddk driver does not. It engages and works in the background
Please help me driver for windows 10 64-BIT
Hi @mahmutbasar,
There is no newer driver for Windows 10 fingerprint sensor. It seems that the old driver is not compatible with the Windows 10 either. So, if the fingerprint work in previous windows, it's a matter of software with Windows 10.
-
ITunes 9.1 works does not for Windows Vista
I've recently updated itunes 9.1 and when I click to open the program, nothing happens
It is open in the process in the Task Manager
I tried to uninstall, download of the installer on the itunes site and still does not work
I am running Windows Vista
Help would be greatly appreciated, thanks
Hi all
You can watch on the Apple site for troubleshooting iTunes and Windows Vista.
http://www.Apple.com/support/iTunes/
The article watch is titled: iTunes for Windows Vista or 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
I hope this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Hello
NAT seems not to work on my pix.
I checked my config n-times. No question :(
Please is - can someone check my config and tell what is the problem? and thanks in advance.
I have a modem DSL (Siemens) working as a default router (x.x.16.17)
Here is the config (x and are the same everywhere in the script)
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 7PmXr29jODRJ.eaI encrypted password
7PmXr29jODRJ.eaI encrypted passwd
tita hostname
domain any.net
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
access-list inside_access_in allow icmp a whole
inside_access_in ip access list allow a whole
access-list outside_access_in allow icmp a whole
interface ethernet0 10baset
Auto interface ethernet1
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside x.y.16.18 255.255.255.248
IP address inside 192.168.22.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.22.5 255.255.255.255 inside
history of PDM activate
ARP timeout 14400
Global (outside) 10 x.y.16.19 - x.y.16.21 netmask 255.255.255.248
NAT (inside) 10 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.y.16.17 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.22.5 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
No sysopt route dnat
Telnet 192.168.22.5 255.255.255.255 inside
Telnet timeout 5
SSH timeout 5
username password of samir. Encrypted KnHwytEP2k92JAD privilege 15
Terminal width 80
Cryptochecksum:abd0f7a4e9339ff5026a3c5c9234cfa1
Try just of Polo to the outside, using the interface:
"global (outside) 10 interface.
and get rid of your other global declarations (might have to remove the "nat (inside) 10 0.0.0.0 0.0.0.0 0 0 ' first or the pix could complain, I forgot).
"I have a modem DSL (Siemens) working as a router by default (x.x.16.17)
"Here is the config (x and are the same everywhere in the script)"
Hereby you mean that the ADSL Modem is also a router? or is your ISP's router x.x.16.17 and they gets you a block of IP addresses? If this is the case, then the ISP router must know to get your addresses using NAT to the PIX.
The trace of icmp shows that the PIX is originating and pings are extinguished as one of your NAT pool addresses, but he won't return. So I really think that your router upstream does not know to send packets to your NAT addresses to your PIX address. If PAT interface work, then that will be displayed exactly that, because the PIX knows to y to answer because it is addressed to him. But the NAT addresses are not directly on the PIX, they exist on this subject and the PIX knows what to do once she gets them, but they must be routed to it.
-John
-
Webcam works does not for windows 8
Hello
Yesterday I installed GoogleVoiceandVideoSetup to use Gtalk WebCam but after installing it, my webcam does not work.It doesn't show any picture, can someone help me on this.Kind regardsGaurav DeyI found the solution: -.
I went to the Device Manager. Rode to the previous setting, and after that I re-installed the latest drivers and it works for me.:) -
Lights up does not, for anything!
I'm doing a cool video with some models of a video game, one of them is a giant robot and I imported into the 3-d element with it's diffuse texture so that I could composite it inside the after-effects.
The only problem is that lights does not work on anything WHATSOEVER, except ambient lights that makes everything more clear. The model turns black when the light is activated (point, point, and parallel)
It's very weird, the rendering mode is set to classic 3D and draft mode is off.
Is there something I need to keep in mind when adding lights that I missed browsing Google for an answer?
THX
I solved the problem. 3D of the element normals were not be shaded because I had only broadcasts a texture, so I had to check the box "Auto-normales" to get the lights to work with the model.
-
Compact/shrink *.vmdk does NOT (for Ubuntu guestOS)
I have a Ubuntu guestOS installation running on a Win7 hostOS.
The corresponding *.vmdk file has a size of about 8.5 GB (!).
When I start the virtual machine and enter in a terminal:
DF h
then I can see that the partition contains only 3.9 GB (= 'used').
So he has a lot of space that can be compacted/shrunk.
I leave the guestOS and go to the menu:
Machine settings VMware-> hardware-> drive-> utilities-> Compact
and began an operation of "compact".
Much to my surprise the *.vmdk file is subsequently (or almost) big as before.
If compacting doesn't seem DO NOT work.
Why?
A defragmentation does not help.
Some with VmWare Player.
And even with the command cmdline
VMware - vdiskmanager.exe - k Ubuntu.vmdk
If not, how can I compact shrink the *.vmdk?
Matt
Assuming that the VMware virtual disk is not previously affected and the file system is ext4, you will need to manually prepare to be narrowed.
In the virtual machine, in a Terminal, become root and then copy and paste the following command, as is and then press ENTER:
dd if=/dev/zero of=wipefile bs=1024x1024; rm wipefile
Wait for the prompt to return, then press stop the virtual computer, then the settings of the Virtual Machine for the hard drive to select the Compact command from the utility button.
-
BlackBerry Smartphones QWERT keyboard does not for text messages.
My keyboard does not appear when I switch my phone when I check my e-mail or text messages. If I use my browser or anything else needing a keyboard, it works fine. Anyone who has an idea on what could be the cause?
Excellent! Batt-pop reboots are as restart a PC - a healthy thing!
-
Outgoing sample does not create a output file
Dear community,
I've tested so far to export plug-in 'leaving '. It is compilable and run under Photoshop CC 2014. But if I run the plug-in in the submenu export, I get no output file.
Debugging indicates that the plug-in is running the DoPrepare method (in the case of exportSelectorPrepare) and also the method of DoStart (in the case of exportSelectorStart), but when he jumps in CreateExportFile (inside the DoStart) it returns false and stops at the end of DoStart. As a result, no export file is written.
Seems that the boolean PIOpenFile method does not accept the response of input parameter, fRefNum or result.
Anyone have similar results? How can I solve this problem?
Kind regards
Silver
What I'm saying, it's to plug the export does not give you that. You must export it to what you want. If you want a temp file something like this would work.
NSString * tempDir = NSTemporaryDirectory();
NSString * tempFile = [stringByAppendingString:@"/MyFile.txt tempDir'];
const char * a = [tempFile UTF8String];
FILE * fd = fopen (one, "w");
If (fd)
{
fwrite ("test\n", 5, 1, fd); / /<-- replacing="" image="" data="" here="" probably="" as="" in="" the="" windows="" side="" of="">-->
fclose (FD);
}
in my command prompt I can confirm that the file has been created:
Cat ' / var/folders/ms/dv872b4s17j8zt039bbdh7_00000gn/T//MyFile.txt '.
test
-
Hello
I'm close tothey done with my new site of clslow and just found out that his webhotel does not offer the simple cgi-script I usually use
Any suggestions that I can use instead (I guess PHP and it's Greek to me...), but how do I do it?
Address on the site and the actual page is here: http://www.kennelmannequins.se/ToftaBilII/servicebokning.html (it is in Swedish, so don't be scared if you don't understand the language)
I hope you can help me!
Carolin
Try NateMail or ProcessForm from the link below. Both come with a simple step by step pdf, set up the guide.
The two are old enough but will get the job done.
Maybe you are looking for
-
Hello!I have a problem - El Capitan would not download on my MacBook Air 2008 I had a few weeks ago. When I try to get to the AppStore, it says "this version of Mac OS X 10.11 cannot be installed on this computer." I know that my Mac is a bit old, bu
-
Today, I was unable to obtain results when I put a topic into the google search bar. However, if I use the address bar it will work and I eventually switched to internet explore and was able to get results in the google search bar.
-
Please help, convert this string to a number format
I send orders via RS232 to my machine and the machine sent back with a display of the number "40" in display normal in my image attatched. I tried to use the string conversion to digital tools, but there is nothing happen just '0 '. I wondered with i
-
Device control series with i/o board?
I have serial (RS232), I want to control a device with Labview. It works fine when connected directly to the serial port of a computer, but I want to control it on a computer that does not have a serial port. This second computer has a CB-68LPR i/o
-
I have four cards of microsoft gift of $50.00 dollars I want to use. When I enter my code of gift cards there is a message saying that the number is incorrect. I was reading on the back of the card and he said: "this gift card does not expire" howeve