Outlook 2011 on Labview EXE

Hello world

So I have a Labview VI, which essentially sends an email through outlook 2011. However, when I turned that VI in an executable, the executable file is not send email more. I don't know if this is a problem with the way I created the application or how I have set up outlook. Any ideas or recommendations? Anything is appreciated.

Never mind

I thought about it. It turns out that the ActiveX Server was not checked when I created the application. Oops.

Tags: NI Software

Similar Questions

  • El capitan is compatible with microsoft outlook 2011

    Before installing El Capitan I need to know if it is compatible with Microsoft outlook 2011

    You should check with the Microsoft Web site to ensure that all of the updates for Office 2011 have been installed.  It should be compatible, but if you have not installed the updates, it will not.

  • Cannot select the junk e-mail tab in OUTLOOK 2011

    I use Outlook 2011 14.5.8 version on my MacBook Air. The system is 10.10.5 Yosemite.

    I want to set the junk e-mail filter. When I select the Tools menu, tab 'Spam Protection' is there, but gray, which is inaccessible.

    My junk mail is untenable.

    Any suggestions, anyone?

    I recommend you to visit the areas of support for Microsoft to find a solution.

  • Application Builder «Browse to LabVIEW.exe» error

    LabVIEW gurus...

    I'm currently building a standalone version of my project.  When I run the application (which is built successfully), LabVIEW makes me search the LabVIEW.exe file.  However, I want this application to run on a computer that will not have installed LabVIEW, and looking up if this file is not an option.

    I know that the reason for this problem is that I use 2 named StrLen and MoveBlock within the library LabVIEW.exe call library functions (to access data from a pointer to a pointer).

    LabVIEW.exe presents itself as one of the dependencies in my project, but I can't understand how to add it to my specifications of generation.  I tried to build a Setup program and include the LabVIEW runtime environment, but this does not work either.

    Any suggestions would be greatly appreciated!

    I'm using LabVIEW 8.6.

    Thank you

    Jason

    In the call to the dll just type LabVIEW without any path. This should work (I used it on 7.1) to automagicallylink it.

    The functions are also in the lvrt.dll which is the main part of the runtime engine.

    Felix

  • How to set programmatically a LabVIEW exe * Windows * priority?

    I have an executable of LabVIEW that makes data acquisition to 10 kHz on an ongoing basis and under certain conditions of dumps of these data to a CSV file that is viewable in Excel.  We noticed if the file becomes unusually large and someone tries to open this file so that DAQ'ing is always in course (but does not connect), Excel will monopolize the CPU long enough such that the exe of LabVIEW does not have enough time CPU to extract data from data acquisition until the data in its circular buffer gets replaced.  I could try to simply increase the size of the buffer DAQ, but really, the solution is to have this executable LabVIEW have "priority" over other executables non-LabVIEW (such as Excel.)    Looking at properties VI--> execution--> set the priority seems to only define the priority between other threads LabVIEW but says nothing about how a thread LabVIEW is prioritized to another non-LabVIEW exe.   I have confirmed this by setting the LabVIEW execution property to 'critical moment' and then in the Task Manager and windows reports still his priority as "normal".   How can I set the * Windows * priority of an executable of LabVIEW without having to do it manually via the Task Manager?

    Thank you

    Ninja Edit:

    I should mention that I am building the executable is nothing else than a "master GUI" which generates four LabVIEW modules in sub-panels using static VI refs and displays important data from these four modules persistent "dashboard".   Modules to do all the boring tasks such as DAQ'ing and display data in charts.  Because I am compiling my code in a single executable using the GUI 'master' as the boot VI, set the priority in properties of VI flow down to the modules I load in sub-panels or will only the priority of the Master GUI be changed?  On a related note, should I set four enforcement system 'Data acquisition' modules, then the master GUI to ' User Interface?

    You can try calling the next VI. It sets the priority for the current process and has worked for me in the past on XP.

  • Write on the Labview EXE Console Ran STANDARD output

    Anyone know if it is possible to write on the STANDARD of a Labview EXE output when run from a Windows console? I don't want to say calling an external my Labview code EXE using the Exec.vi system and get the standard output of the external exe returned to Labview but rather run my EXE Labview as an application of console se and have the Labview application a pass/fail result final to stdout to the output console.

    I found this post which allows to accept command line arguments, but I have not found a clear method to write to the standard output.

    http://digital.NI.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364

    I found this thread on the LAVAG.org site but unfortunately I forgot my password for my account and my account was under an old email address that I no longer have access to in order to reset it. I tried to create a new account, but it is not allowing me to register a new account. There seems to be a solution to this on the 2nd page of the thread, but due the fact that I can not log on the site, I can't download the solution try.

    https://lavag.org/topic/11719-running-a-LabVIEW-exe-from-the-console/?page=2

    aaronb

    As it turns out, my last blog was about this specific topic. I fell on it as a result of some dll which was not "plays well with other children."

    http://www.notatamelion.com/2016/05/05/aint-Misbehavin-thanks-to-external-calls/

    Mike...

  • BlackBerry Smartphones BlackBerry "BOLD" - desktop synchronization with MS Outlook 2011 (installation 14.3.1)

    I changed my mail, calendar and contacts with Microsoft Outlook for 2011. Right this minute I don't get any synchronization functions whatsover. Maybe I have to disable/trash Entourage? Suggestions would be greatly appreciated.

    Thank you

    Chris

    Hey, CBR,

    Welcome to the community of BlackBerry Support Forums.

    Thanks for the question.

    Follow the steps in this article on how to sync your data to Microsoft Outlook 2011: www.blackberry.com/btsc/KB24730

    Let me know if you have any other questions.

    See you soon.

  • I can not load Outlook 2011

    I had a problem with outlook. So I uninstalled the office suite.

    I reinstalled Office 2011 suite, but now cannot open outlook. I get a message that says 'Out could not load with this identity.

    Now what?

    'Identity cannot be opened with this version of Outlook for Mac', that's what you mean?

    So try these troubleshooting steps: https://support.microsoft.com/en-us/kb/2470204

  • call dll driver in labview exe

    I have an instrument driver in LabVIEW.  The driver still functions call a DLL in instr.lib through the call library function.  When I compile an exe file that uses the driver functions, where should I put this DLL?  He would be allowed to compile the DLL in the exe?  If it's ok, how it works, because the driver get the DLL in instr.lib?  Thank you!

    You can not choose the exe as a destination of the DLL. Yes, the DLLS are located in the folder data.

  • LabVIEW:EXE generates the error 1003 calling plugin with the type definition

    Hi all

    I am running LV 2012 on a Win 7 machine. I had this same problem with LV 2011, so I'm sure that's not associated with version/upgrade.

    Go to a LV-built EXE, I try to call a dynamically loaded Subvi. I did it several times with success before, so I think I know how. I prefer to use the call by reference, but I get the error 1003 Open Ref VI (with the type specifier). If I use the type specifier, can I open the Subvi, but the State is listed as 'bad '. Then, I went to recursively through all the subVIs (~ 25 in total) and concluded that the only item with a status of 'Bad' was a type definition.

    I checked several times, several different, that all ways the subVIs (and the definition of Type 'bad') are available to the Subvi dynamics. I did that the type definition is correct. I have also made sure the subVIs are stored as .VI files in the same directory and not within an EXE file. When I try to run the VI run call node, I still get the error 1003. I checked the path that displays in the error dialog box is the exact path for the Subvi (it would be for other VI properties and methods working properly).

    Why can't I run a sub - VI loaded dynamically from an executable if it has a type (a group of 3 trails) as output parameter definition?

    I just tested an idea: rename the library from project to project A create script. Now when it loads, it does not disturb what he must internally with externally called Subvi (dynamic). It worked the first time!

  • LabVIEW Exe is different from Vi

    Hey everybody,

    I saw a strange behavior during the test to an old application I'm building some time ago.

    Accumulation LV ist with objects as models .NET project and Calculationroutines. Everthing works fine in the IDE of LabView. Calculation model and work well.

    When I compile this project with the manufacturer of LV, it starts very well. But I recognize something strange.

    In .net, I defined a class A as:

    class A

    {

    function_one (x, y, z)

    function_two(c,a)

    }

    Where x, y, z, c, has are all the digital values.

    And now it is. As I said in the Vi (LV IDE) everthing works fine.

    The call of function_one() and funktion_two() works perfectly. In the function_one() Exe-Application works, but functuion_two not even call it, as I have the exe application with Visual Studio debugging.

    So what's the deal here "?" Why funtion_two does not work? not yet called?


  • LabVIEW exe is secure

    Hi all

    Is it possible for someone to break the code in an exe of labVIEW? I wonder just about the integrity of my code when I send to the customer!

    Thank you

    dphan128 wrote:

    Hi all

    Is it possible for someone to break the code in an exe of labVIEW? I wonder just about the integrity of my code when I send to the customer!

    Thank you

    If you mean "is it easy for them to see my block diagram when I don't want to do", then the answer is difficult, if not impossible.

    If you give them the VI with a protected password block diagram, don't worry, they won't.

    There has been many discussions regarding the feasibility of crack the password, and due to a deliberately placed embedded wait function by NOR, it would be almost impossible to guess the password of brute force.

    If you simply gave them an executable built, their chances are even worse . To my knowledge, there is no way they could possibly get an executable for the block diagram.

  • Why can't I hide labview exe

    I'm trying to spawn a labvie exe application from a visual basic application.  I use the shell command to run the labview application.  It works fine except that I use the "vbhide" attribute which does not seem to work for the labview application (it works for other Rogue programs).  I then followed some of the suggestions I found in the forums on the use of the property of façade and hide the window... that little work, but you can still see the window flashes briefly on the front screen is hidden.  I don't like it.  Someone has to meet this problem before?  All solutions?

    You can go to file-> properties VI, category select "Run-Time Window Position" and the set position reduced to a minimum.  It appears in the taskbar, but not flashing.

  • Cannot open Outlook - recommend run scanpst.exe

    Run the repairer gives me the message that the pst file is in use. try to move the pst file says he's opened in the system.  Cannot close it, cannot run the repair, cannot open outlook. ?

    Outlook:

     

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

    Office newsgroups

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

    Discussions of general issues of Outlook.

    They will help you with your Outlook questions when repost you in the Office discussion groups above.

    See you soon.

    Mick Murphy - Microsoft partner

  • What are the requirements of the system for the labview runtime engine 2011

    Hello

    I'm looking for (ideally 2011 release) LabVIEW runtime engine requirements. The only information I can find a few States what operating systems it supports. I am eager to check the specifications of a target (Touch Panel computer - probably running Windows XP Embedded), to allow this execution. More precisely the amount of non-volatile storage system required - because we will need to specify a CompactFlash card. Clearly the application exe take little space like XPe will, but I'm eager to know the needs of the TENS.

    Andy

    Not sure about flash complact...  I can't remember seeing it in the relase notes, but follow the link below for the Manual:

    It should support the touch screen (I don't remember if you still need an additional plugin for this... I'll check).

    http://www.NI.com/PDF/manuals/371778g.PDF

    Look at page 2, the middle column

    or below the basic requirements:

Maybe you are looking for

  • 3D blu ray film on the Satellite A665-14 days

    Hello Feel like I am back in the age of darkness of the DVD here... but I'm having a lot of inconveniences to blu ray works. I bought a reader blu ray a couple of weeks, and it took me a few hours to find corel windvd on my laptop (and it is the play

  • The solution of the problem of lag note k3

    I sow many article complain that the game note k3 performance are not not as expected and so I searched on YouTube and I found this video I hope it will be helpfulhttps://m.youtube.com/watch?v=lF-7hA5twbw

  • updates and IE messages. cyber link

    I have a Hp ENVY 17 t-j100 windows 8.1 Intel core I7 - 4800MQ [email protected] 2.70 Ghz, 64-bit, x 64 processor operating system, I received a message from HP support assistant, update cyberlink media suite and cyberlink photodirector,are safe and necessar

  • Convention of file name for the *.dat files

    My colleague gave me several *.dat files created by LabView.  They have names like Data2_11119_40866.dat.   I think that the strings (11119 and 40866) could contain information about the time covered in the file.   If so, this information would be us

  • VISA Write / read error

    Hello From what I saw this was not posted before. It seems that the error of read/write VISA is quite common and after reading through a few posts and try as proposed solutions, I find that nothing works. I am trying to contact my motor controller. I