Output in two ways at the same time

Similar Questions

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• two cursors at the same time move under a certain condition

  I'm trying to move the two sliders at the same time under a given the conditions. I have my program set up as follows:

  When 1st setting on "Continuous", all output values 4.

  When the 1st setting on "Pulse", values output based on ' 'Send the Signal' button support according to the following below:

  1 1 shows the value of cursor 1 and 2 slider when the switch is on "simultaneous."

  2. the cursor 1 and 2 output the value of cursor 1 and 2 slider when the value of "independent".

  My question is based on 1 above. I basically have a hard time trying to figure out when the condition is set to "Simultaneous" be able to see cursor 2 movement.

  Can anyone help? A large part would be appreciated.

  NOTE: The output is correct how I want it. I want just the cursor 2 move when cursor 1 must move under a certain condition.

  All I needed was to move the Slider 2 property node before the total multiplcation.

  Thanks again James.Morris for your help!

• Run different applications in Creative Suites on two computers at the same time.

  I have a backlog of mini tape DV from my vacation for 10 years.  The rear reason is because slow computers have made a personal production until the very slow DVD creation.  I've recently updated to 4-core i7 with unique HDs and on the point of buying a custom built 6 hearts i7 with SSD and RAID HDs.  I understand that I can install Creative Suite Production Premium 5.5 on two computers.  One facility is already on the coreI-4.   I intend to install the second installation on the 6-core.  I would use the 6-core for production, while the 4 - core is the capture of DV cassettes.

  If I had bought a copy of an application separate and installed on separate computers, I'd be able to run them at the same time.  Is there a way I can run two computers at the same time with Creative Suite to accelerate personal production for example can I run separate from the Creative Suite applications, I want to use separate programs, on two computers at the same time, as long as these requests are not the same?

  You can run the same or different adobe products to the same or different times on the same or different computers (except that you can not run the same program more than once on the same computer at the same time).

• Two Dynadocks on Mac - VGA two displays at the same time?

  I have two Dynadocks: PA3542EY1PRP and PA3541EY1PRP.

  They are connected to the iMac 21 'Snow Leopard'.
  All USB ports work but I can't run that two VGA displays simultaneously.

  If one works, the other doesn't.
  Display links drivers are updated.
  There must be a conflict.

  Any help is appreciated.
  Thank you very much.

  Hmm I'm not really sure if the system can access two external graphics chips Dynadock Mr. the fact is that you need to install the Dynadock software and my knowledge, it not have access two GPUs at the same time.

• Two applications at the same time on the M200?

  On the Amazon website (and I'm sure elsewhere), it says on the M200:
  "With the optional Tablet Multi Dock station, you can connect an external keyboard and monitor allowing you to run different applications on screens separated at the same time."
  I've been reading my M200 and the multidock and it doesn't say how to do this. It seems strange when it's supposed to be something special you can do with the M200, he's not telling how you do! Could someone enlighten me please?
  Thank you very much

  Hello

  In my view, this means that the option of extended desktop.
  If the external monitor is plugged so that you can use this option to enlarge the display option. This option, you can activate with the key FN + F5 combination. If this option is enabled for example, you can open two widows of IE and one from this window, you can switch to the external display. In this case, you can use two applications at the same time

  Good bye

• How to watch two clips at the same time on the other, with an opacity of 50% each.

  How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.

  Thank you

  PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.

• 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

  Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
  Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
  To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
  I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
  I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
  Does anyone else have or had this problem too?
  I know I'm a sucker for pc, but please go steady on me, your.
  Win pro 8.1.

  will you please and thank you very much indeed, couch.

  Malygris1 wrote:

  Hi there @SofaQueue

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

  ETC.

  Let me know if you still have problems and view the details of what happens.

  I will mark it as resolved now. Very useful, thanks.
  What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
  Simply turn off the audio improvements and testing showed once again that's all it was.
  

  Thanks again though, nice to see people are willing to help so much!

  Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

• Avoid to get two theards at the same time

  Hello

  I was wondering how to avoid to run two threads at the same time in teststand. When I using teststand, I found it can run two threads in simultaneity.for example, I can open a file sequence, using single-pass enter point to run a theard, when this theard is not finished, I use single-pass or TestUUTs enter point to run other theard. I want to avoid this case. Is there settings, we can get motor teststand to tell me a thread is running or not?

  Thank you!

  You write a custom user interface? If you use an application Manager (all the example user interfaces and the sequence editor to do), you can see:

  ApplicationManager.Executions.Count > 0

  If you use just the engine that you can keep the number of executions by increment your account upon receipt of the UIMsg_StartExecution UIMessage and reduce your number when UIMsg_EndExecution is received.

  If instead you want to determine the number of executions of a sequence running, you can use RunState.Engine.GetInternalOption () to get a reference to the Application Manager (at least of the UIS and the sequence editor that use an Application Manager) and then do the following ActiveX to get the Executions.Count property.

  Hope this helps,

  -Doug

• Has taken pc in for Reg. gliches & fix, now the speakers will not work! Have chked everything I know, still sound like dubbing, or two channels at the same time?

  I run a custom built Tower pc, with windows xp svc pk 3 on this subject. ASUS MB brd. have a large woofer and two small tweets, it looks like that I play the song even in two places at the same time, only not synchronized.  All confused, lived all the diagnostic test can think and all say it works fine of course.  As a result, been combing of this Council, but can't really find something sufficiently specific for this problem.  Or if it's here, Miss me him!  For any help would be appreciated, I wish you my songs back!  I tried to play off of windows media and hard drive also.

  BTW, I'm the old lady of 58, so, could you young computer scientists Genesis keep it as simple as possible!  Please, I beg you! Thank you very much!!

  Hello

  1. what Media Player do you use?

  Try and proceed as described in the link.

  How to fix sound problems in Windows XP:

  http://support.Microsoft.com/kb/307918/en-GB

• Two users on the same PC. How to run the application even for two users at the same time?

  Hello friends,

  I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?

  Thank you for your comments

  You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Reconfigure fails when adding two volumes at the same time

  Hi all

  We use vRealize ver 6.2.1 6.2.1 Build Automation - 2543390.

  We found a bug strange reconfiguration of a virtual machine. If I add a volume of hd at a time, there is no problem. But if I try to add two volumes at the same time him reconfigure fails with the message "reconfigures has not, waiting for retry.

  

  On the vRA 'Infrastructure-monitoring-> log >' error is: "machine Reconfigure failed: Machine: xxx, error: apply WaitForTask StorageDrsRecomendations_Task Enttity...» XXXX.VMDK invalid data store path.

  

  On vCenter Console, the error is: "path of the invalid data store [Cluster... vmdk]."

  

  The same error occurs using vCenter 5.5 x and 6.x

  Any ideas?

  Thank you very much

  D.

  It was a problem with DTS investment by vRA. We have identified the problem and the fix will be available in the next version.

  Thank you

  Kumaran

• two microphones at the same time (hearing CC)

  Hello, it is possible Records two microphones at the same time? in hearing CC... I have two USB microphones, but only lets me put a default value.

  You have just to face why I always recommend against USB microphones for something else that the simple, single microphone, no request for surveillance-style.  For anything else, you would have been better with a couple of microphones XLR and a basic USB interface.  This is not a hearing problem... most of usb microphones just use the Windows Audio drivers and that is what limits you to a single microphone.

  You MAY be able to do this work by downloading ASIO4ALL ASIO4ALL - universal ASIO Driver universal driver and this aid instead of the Windows Sound drivers.  It takes some fiddling and while reading the instructions.  Otherwise, I've also heard people using a cable Audio virtual Virtual Audio Cable Home Page to achieve the same thing - but beware, it is NOT free and takes a lot of detailed configuration.

  Me?  I'll find someone who wants to buy two second-hand pickups USB then put money into two USB microphones and a basic interface to both channels.  Despite the assertions of 'plug and play', it would be much simpler (and flexibility) as soon as you want to do more than using a single microphone.

• Running two Apps on two computers at the same time

  I know the ability to install on two computers CC and I saw the restriction of not being able to run applications on two different computers at the same time.

  My question is, does that mean that all the two apps at the same time or cannot run the same application on two computers at the same time?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  # The license is for you and you alone. It is not a shared license.

  Your daughter must have its own Adobe ID and its own subscription to use the software.