Output of Simulator is not appropriate in an external display for Swift

Hello

I am a first time Mac user. Bought a Mac Mini to learn the Swift program.

Version of the OS - OS X

Version of Xcode - 7.3

How to set the Simulator to show the correct output? After placing a button and the execution of the code, the button is placed in various different places for iphone versions.

Ask this question in the Forum of developers for Swift: https://forums.developer.apple.com/welcome

Xcode-click and highlight the fast focus groups. If you are asked a developer user name and password, it is your identifier Apple and your password.

Good day.

Tags: Mac

Similar Questions

  • Tecra A7: Not possible to update driver display for Mobile catalyst 6.9

    I tried to update my display drivers for Mobile catalyst 6.9, but during the installation, I get this error annoing: "failure of the installation run installation: an error occurred during a seek operation.

    I tried to uninstall the old drivers and then installing the new, but I get the same error and I don't know the cause. A few days ago that everything works perfectly, so I guess it's a software I as causesc this problem.

    Help, please!

    Hello Vlad

    It is well known that on most new units is not possible to install the graphics drivers designed by graphics card manufacturers. He is always shown in Setup error as in your case. It's the material.

    Graphic driver Toshiba designed is a kind of sanitized version. Sorry, but I'm afraid there is nothing to do. You claim your previous assignment of fan performance. If this driver can be installed, I fear that this graphics card may be forced to run faster and produce more heat.

  • laptop does not connect to the external display

    I have a compaq presario cq43

    I am trying to connect it to an external monitor [my tv] I was never able to get the display on the TV, but with other computers laptops, I had no problem, I use a vga cable

    Once I connected the vga cable into the laptop, the screen flashes repeatedly making it impossible to view the display on the laptop [with still no image on tv] so I unplug the vga cable.

    I updated my video driver

    and tried different resolutions, televisions and refresh rates but in vain

    Please respond quickly!

    Sincerely, isaac :)

    The repeated flashing makes me suspect that there is a problem with the connector on the PC (because it works on other PC using the same equipment).  Because it does not work on the other TV with this PC - which also tends to suggest that this is the connector also.

    I would say it sends to the service center of Compaq for additional tests.  Be aware that if the system is not under warranty - repair bill could be very costly.

    Good luck!

  • Custom image drop-down list appears not appropriate on Blackberry 9000 Simulator

    Hello

    I created the custom in my code drop-down list. my code works fine for other simulators.

    But when I tried to run on Blackberry 9000 Simulator from the drop-down list not shown correct image he cuts half the size of the image.

    I check my code, I did not manually height for the drop-down list.

    Please tell me why image appears not appropriate Simulator 9000.

    Welcome to the forums.

    I'm guessing that you don't know how to use the insert of Code button.  If you look at the top of the editing window, you will see a number of options for formatting such as police.  Look to the right and there are two buttons, one is used to insert the code.  Hover over the buttons and you will see a description.  Press the button insert the Code, add your code and you will see something like the following:

        public void drawListRow(ListField list, Graphics g, int index, int y, int w) {
            Bitmap bitmap = Bitmap.getBitmapResource(arrowBitmapName);
            int fontWidth = getFont().getAdvance(text);
            int width = Display.getWidth() ;
            int height = list.getRowHeight();
            g.setColor(Color.BLACK); g.setFont(fontPlain);
            g.drawBitmap(0,0, bitmap.getWidth(), bitmap.getHeight(), bitmap, 0, 0);
            g.drawText(text, 3, y-drptextHeight, 0, w);
        }
    

    I think it's the routine that you use to draw each line of your drop...

    I recommend that move you as much code as you can out of this method.  It's called very often.  Creating a Butmap here, which is an expensive operation, is not a good idea, especially when the Bitmap image in reality does not change.  So create once and use it in the drawListRow.

    Also use the parameters that are passed.  The width you have to paint is given in the parameter, and perhaps not the same as the actual display width.

    In any case, this code draws the Bitmap to (0, 0).  I susspect should be at (0, y).  This could explain why it is not drawn correctly.  You seem to have a similar problem with the text.

    The drawListRow is assigned a value of 'y' and should paint from y to y + listField.getRowHeight ().  But in fact drawListRow has access to the area of the entire painting, so can do too much else.  You must code your method correctly to get good results in your list.

    Hope this helps, if not, please post your code so we can actually read.  In fact, as I say to others, do not post your real code.  Create a simple example that we can run illustrating your problem.  Then everything can run your example and see the problem.  Never stick all your code.  People are put off by the number of lines of code.

  • Simulation does not stop in the Loop Simulation & control

    I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

    Now, I've implemented nearlly all, but now the simulation does not stop.

    First here is a picture of the .vi when it still works:

    But this isn't the end result, I want to have.

    I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

    You can see from the image below:

    If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

    The .vi is attached. I hope someone can help me.

    I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

    But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

  • Audio capture on Simulator does not

    I am writing an application that captures the sounds.  He has used the technique described in the javadoc for RecordControl.  My code works fine when it is installed on my Curve 8330.  But when run on the Simulator, it seems to work, but no data is never written to the record output stream (suggests that the Simulator is not my microphone audio routing).

    I'm under BlackBerry JDE plug-in for Eclipse and the BlackBerry JDE v4.5 component Pack.  I tried all the profiles profiles 8300 Simulator and no capture any sound.  I rechecked my microphone is not muted, and other applications to record on my WinXP box actually capture sound.

    Is this something that should work in the Simulator?  I have to configure something to give the access the audio in Windows JVM Simulator?

    I think I have solved my problem.  Last night, I restarted eclipse and everything started working as expected.

    Honestly, I don't know why this correction of the problem but have a hint.  I started eclipse earlier in the data via a Remote Desktop Session.  I don't know the details of how the JVM determines with the source sound/sinks are available.  But I imagine that the process of the eclipse didn't see any sound source because I was connected via RDP.  And it took a reboot once directly connected so he can see all IO ports.

  • I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

    I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

    Hello

    I suggest you to please follow the steps described in the following articles and check if it helps.

    "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

    http://support.Microsoft.com/kb/812467

    How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

    http://support.Microsoft.com/kb/973457

    Let us know if it helps!

  • a window said "flight simulator does not work with your video card. Make sure you have the latest drivers installed for your video card.

    Flight Simulator X not would allow me to get it because it says I need to update the video card. I think the problem was that I finally erase all memory of the computer using a special cd, because once I have done this and downloaded the software again, it stop working

    Hello el 24, welcome.
     
    There are a few possibilities as to why you see this message. There is a chance that you do not have your drivers graphics/display installed or configured correctly.
     
    We will need to know the brand and model of your computer to properly route you to the right path.
     
    Once we have this information, we can see if we can provide you a link to the Web site of the manufacturer of your PC to download the driver.
     
    Let us know,
     
    Thank you!

  • Microsoft Flight Simulator does not work

    My husband is having a problem with his flight simulator.  After that, it installs the software, it is able to play.  However, after this first piece, once he leaves the program and try to open it again, it will not load.  The programs displayed on the hard disk but does not work.  It uninstalled and re installed the program, with the same result.  After the initial piece after installation, it is not able to play again.

    Hello

    Here is a link that should prove beneficial to get a resolution to your inquiry.  I hope that this information is beneficial.

    http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/24974b97-BCEE-46EA-8f52-f7ad0881125a

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • simulation does not work

    I composed a few diodes the wizard of components, such as the diode acts like a switch perfect to 0.7 volts.  For some reason any SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  The diode model is the problem.   Any ideas how to operate?  Attached is the file multisim

    Thanks in advance!

    "- Checking SPICE netlist for perfectbridge - Thursday, February 5, 2015, 11:51:34-"
    = SPICE Netlist verification completed, 0 error (s), 0 warning (s) =.
    Model 'diodeperfect__perfectdiodes__1': 'IS' parameter must be greater than zero
    doAnalyses: incorrect use of the parameters of the model
    Cancelled simulation. "

    So: right-click on one of the diodes, select 'Properties' - 'Value' tab - press "Change model" button - box 'Use default' for 'IS' - press "Change all 4 elements" - press "OK".

  • the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    Hello

    · What is the number and model of the mouse?

    · Will there be any changes made on the computer before the show?

    You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

  • No audio output device is installed - not corrupt Windows drivers

    Suddenly had a red cross on the audio output and not sound. The thought of hardware problem. Bought basic sound card, drivers installed. The Red Cross again still no sound. Looked on MS answers. Tried all simple suggestions for pilots and others. Downloaded the drivers and install them like crazy.  No change, nothing. Not realized a driver problems. The issue of corruption of Windows. Did a clean install of DVD and voila, the sound is restored with no red cross.  Then tried to update from Windows.old. He successfully achieved and... Red Cross reappears. Now, did a clean install once more and have a machine with its work but not user or data files. Bloody Windows folder; There are 45 485 files in my Windows.old in Windows version (file) and install 45 307 files in my own version of the same file. Somewhere in this huge haystack is the needle that explains why the sound does not work. Damndest thing. For others suffering from the issue of audio, so that many well-meaning folk here have put forward sensible suggestions on the drivers, they are not necessarily the answer. And in fact may just lose a lot of your time.

    Anyone with suggestions for the restoration of a more selective way of Windows.old or my last backup (of course without causing corruption..)?

    My machine: 2NKT31AUS of Proc of AMD 64 3500 + BIOS LENOVO Lenovo 3000 J115 73886BG 24/10/2007

    SMBIOS 2.4

    Windows 7 Ultimate 6.1.7600 Build 7600

    Hi SpiritX/Rob,

    Thanks, yes I already tried and actually a restore successful from the windows.old folder. Unfortunately, the restoration has also eliminated my audio (and network and probably some other stuff too - another story)!

    I myself have reconciled now to live with my own installation, made a new battery of updates from WIndows (about 250 MB worth!) last night and always perfect. Machine has always has audio, still has the networking.

    I don't want to treat it as a new machine, just re - install the program I really need/want rather than lots of "stuff" that you think you want or as Apple, Google, Adobe, Microsoft, Sun (Java) manage to drag your defenses.  First installation has been AV (Eset), next installation will be Paragon (for back-up). So my own programs, then the user files.

    It would be a very interesting experience to compare the 'pilot' between my windows (clean-install, work) current functional folder and those in the hiearachy of corresponding windows.old. Who'd settle, to some extent, whether the pilots themselves or some other setting in some different files.

    Thanks again for your support here, and I love the quote from Mark Twain.

    See you soon

    Swords

  • PlayBook Simulator does not start in vmware.

    I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

    But the playbook Simulator does not start on vmware... He simply display the splash screen...

    Do you have another computer to try out it?

    For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

    I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

    Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

    FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

    HTH - Rufus

  • Email and Services of MDS Simulator does not not on Windows 7

    Email and Services of MDS Simulator does not not on Windows 7

    Finally, resolved. There is no need to edit the file of commands or anything else. Everything you need to install Email and MDS Services Simulator and simulator of Smartphone in C:\Research In Motion instead of C:\Program Research In Motion.

    Best regards

  • Running on Simulator does not

    Hey,.

    I have problems in the execution of my application on the Simulator. So wheh I started the application and compiled everything has worked, the application could be launched on the Simulator. Today, I loaded the project compiled without errors and tried to run the application on the Simulator. I got the error the executable, I try to run isn't for the Simulator. So I cleaned my project, rebuild and try again. Now, I get the error that the file does not exist. The only solution for me is to create a new project, copy the source to go for in this project and build. So I can run on the Simulator, but this isn't the solution. Is that what someone else has experienced this problem or does someone have a solution for this?

    Best regards

    Felix

    Looks like your project file become corrupted, you could try a clean wipe of the sdk/ndk parameters and workspace you and reinstall.

Maybe you are looking for

  • How to activate the player on Firefox mobile 20

    Yesterday, I've just updated my Firefox to worm 20 but when I browse the news site I found no icon for a book on the address bar which activate the drive mode. Please help me, how to enable it.

  • Satellite P750-12 t - new installation of Windows 7

    I have a P750 Satellite that has been used by my children for the game - Windows 7 is pre-installed. Now, I want to install Windows 7 again to have a new and good system. I don't have any Windows installation media has been pre-installed, and I don't

  • 251. 014 l: need help looking for some drivers

    Dear expert HP, I decided to install win7 ultimate 64-bit week last on my desk (251 - 014-l) and I had trouble finding the 3 drivers... 1. network controller 2. SM Bus controller 3. USB controller any help will be greatly appreciated Thank you!!

  • Profile of stimulus so stop procedure

    Is there a way to stop a profile of stimulus through a procedure? Let's say that we have set up an alarm to trigger a procedure.  This alert is used to monitor a physical emergency stop button connected to a digital input.  When the condition of the

  • New motherboard. Need to recover

    Had to replace my MOBO on my old Compaq SR2150NX of 2 years. Have 5 recovery discs: 700 MB CD. Is it enough or that I lose some? 'F' key starts the process?