Output of the different worksheet on the French locale

Similar Questions

• Error input/output of the VMFS5 local data store

  Hello

  I have 3 locally on the hard drive on my server from IBM. 1 250 GB drive, I used to create the data store Linux (datastore1) and other 2 disks that I created the Windows data store (datastore2)

  Couple of VMS is deployed on the two databases. Over the weekend, suddenly vms Windows Data Store (datastore2) went down. When I checked Monday concluded that data store is visible to ESXi host but I am unable to navigate to virtual machines.

  If I Directory VM cd I get below error:

  ~ # cd/vmfs/volumes/Windows\ Data\ store/Win - 2 k 8-2.

  SH: getcwd: input/output error

  # (unknown)

  ~ # esxcfg - scsidevs - l

  MPX.vmhba32:C0:t0:l0

  Device type: Direct access

  Size: MB 1911

  Full name: USB Direct-access Local (mpx.vmhba32:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Seller: SMART model: USB - IBM Revis: 0000

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0000000000766d68626133323a303a30

  VAAI status: unsupported

  MPX.vmhba33:C0:t0:l0

  Device type: CD-ROM

  Size: 0 MB

  Full name: Local USB CD-ROM (mpx.vmhba33:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Devfs Path: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Seller: KVM model: vmDisk-CD live again: 0.01

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0005000000766d68626133333a303a30

  VAAI status: unsupported

  NAA.5000c500478aee93

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478aee93)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478aee93

  Devfs Path: /vmfs/devices/disks/naa.5000c500478aee93

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478aee93535439333030

  VAAI status: unknown

  NAA.5000c500478b8d3b

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478b8d3b)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478b8d3b

  Devfs Path: /vmfs/devices/disks/naa.5000c500478b8d3b

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478b8d3b535439333030

  VAAI status: unknown

  NAA.5000c500478d724f

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478d724f)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478d724f

  Devfs Path: /vmfs/devices/disks/naa.5000c500478d724f

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478d724f535439333030

  VAAI status: unknown

  ~ # esxcfg - scsidevs - m

  NAA.5000c500478d724f:1 /vmfs/devices/disks/naa.5000c500478d724f:1 4f83af28-52abeaf2-6475-5cf3fcba46f2 0 Linux Data Store

  NAA.5000c500478b8d3b:3 /vmfs/devices/disks/naa.5000c500478b8d3b:3 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 0 Windows Data Store

  Data store of Windows NAA.5000c500478aee93:1 /vmfs/devices/disks/naa.5000c500478aee93:1 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 1

  Here is the output of dmesg: I suspect to be a hard drive problem

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 8, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 10, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu2:382348) WARNING: UserLinux: 1340: unsupported: (void)

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0x412440db9c40) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) ScsiDeviceIO: 2316: Cmd (0x412440db9c40) 0 x 28, CmdSN 0x2a to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0 x 412441635000) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0 x 412441635000) 0 x 28, CmdSN 0x1c to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:41.476Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0x412440da3500) 0 x 28, CmdSN 0 x 21-dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  Please guide me to solve this problem. Thank you all in advance

  /virtu4

  This problem is solved.

  Thanks to the communities for not responding, that made me to fix this myself

  /virt4

• I use a simple low-pass, but the output of the filter outputs at a different frequency, even if the input frequency is the bandwidth

  I'm simulating a sine wave at approximately 1000 Hz (I'm variable according to the frequency with a slider), I would like to pass this signal by a lowpass filter (butterworth) with a high frequency of 2200 Hz cuttoff and a low pass to 2900 Hz frequency. However, the output after the filter frequency seems to be lower in the order of a thousand. the output frequency is about 0.1 Hz.

  

  Y at - it someone who can guide me please to solve this problem, I tried different filters and I'm still having this problem, it would be incorrect sampling?

  I enclose the block diagram and the front panel

  Because you use express screws and the type of dynamic data...

  You convert the signal of DDT (which contains the clock information) in a table DBL to perform filtering. Take it a DBL array (which contains no data of timing) and converted it into a DDT (which now contains no data timing). That's why when you try to view and analyze it you have lost all the data timing (frequency).

  If you were to exit table DBL of your filter and build a wave form and provide the dt to the waveform of the sampling frequency control, then it will work.

  Better yet, ditch the DDT and use waveforms from the beginning

  

• Write the spreadsheet in an array of strings on a different worksheet

  Hello

  is it possible to write the spreadsheet to a table of chains, but to an additional worksheet?

  I am writing the results of the spreadsheet, but I want to create a different worksheet so that I can put the raw data.

  is this possible?

  If so, how?

  

  You can't unless you start using ActiveX or report generation tool to connect with a real spreadsheet .xls file.

  You are read and write a text file in the form in the way of a spreadsheet with delimiters between values in a row and the lines of text on the other.  Text files have no understanding of the data being on a "sheet" and other data on another.  It is a peculiarity of the format property of Excel file (and thus other spreadsheets) that allows Excel what data need to be put on what spreadsheet.  It is not the kind of information that you can pass along the use of LabVIEW based text file i/o functions.

• Output of the script is different from one system to the other.

  I am running a script from the command line on two different platforms (desktop Windows 7 and Microsoft Server 2008 R2 Enterprise platform) and the output of the script produces is different on each platform.  More precisely; the script is

  For /f "tokens = 2-4 delims = /" %%d in (' date / t) ") do (set mydate = % c-%-% b).
  For /f "tokens = 1-2 delims = /: ' %% in (' time / you) do (set mytime = %% a % b).
  mydate %Echo% > log.txt
  MyTime %Echo% > log.txt

  and the output from the Windows 7 Desktop is:
  2014-07-31
  0249 PM

  While the release of Server 2008 is:
  ECHO is enabled.
  0249 PM

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Since yesterday, I can't export to Flickr more. The following message (I translate from the french, so probably different from the original English message): "an internal error: comma symbol was expected.»

  Since yesterday, I can't export to Flickr more. The following message (I translate from the french, so probably different from the original English message): "an internal error: comma symbol was expected.»

  Flickr is flaky again.  You'll just have to wait (minutes, hours, or even days).   It happens more often that Yahoo is falling apart.

• [HELP]: email sent by running Tomcat library loses the French tanks

  Hello
  
  I have cameras a jar of wrappers library that sends an email containing UTF-8 characters encoded. Now, when sending an email from a Solaris environment, using the shell directly (using a built-in test method), the mail is generated correctly (characters are correctly encoded in the body of the email - when checking the log4j - which has been configured to write content in UTF-8 format) and e-mail is readable on MS Outlook.
  
  However, when you call the same method of a Web application, the email is generated correctly, however as soon as it is sent and the output of DEBUGGING of JavaMail prints e-mail already with the screwed up French characters.
  
  Here are the contents of the file and outputs the log to illustrate what is happening...
  
  I have already supported generation of e-mail methods to ensure that all entries and exits is compatible with UTF-8 encoding (all readers, writers and getBytes() methods explicitly specify the encoding as "UTF-8" type to not depend on the JVM locale by default)...
  
  If a person suffers from a similar behavior and/or have some advice on how to solve this problem, it would be greatly appreciated! :)
  
  Thank you all for your support!
  Gizmo
  
  
  * (1) - the Email in French - in-house and comes from newspaper the Tomcat file:*
  -----------------------------------------
  Dear user,
  
  You have ordered from EUMETSAT the following items:
  
  Description, quantity, unit price
  
  -Meteosat Key Unit (MKU), 1, EUR700.0
  -Meteosat Station key Unit (SKU), 1, EUR400.0
  -Direct Metop Readout Station key Unit (SKU), 1, EUR400.0
  
  Total amount: EUR1500.0
  
  
  We remind you that you can now proceed to payment by credit card through Saferpay. Please click the link below and follow the instructions:
  
  We will send the goods upon receipt of your payment to you.
  
  Pour any question or if you want to change/cancel your order, please contact us at [email protected].
  
  Kind regards
  -----------------------------------------
  
  * (2) - out of the JavaMail API with the property set to true mail.debug *.
  -----------------------------------------
  DEBUG: getProvider() return javax.mail.Provider [TRANSPORT, smtp, com.sun.mail.smtp.SMTPTransport, Sun Microsystems, Inc.]
  SMTP DEBUG: true, useAuth fake useEhlo
  DEBUG SMTP: try to connect to the host 'mail.bla.int', port 25, false isSSL
  220 *********************************************************
  DEBUG SMTP: connected to the host 'mail.bla.int', port: 25
  
  EHLO veopis02_e0
  250 - listserv.bla.int pleased to meet you
  250-ETRN
  250 XXXXXXXA
  250 AUTH LOGIN
  250 AUTH = LOGIN
  250 XXXB
  250 XXXC
  250-PIPELINING
  250 8BITMIME
  250 DSN
  SIZE 250 10485760
  "" DEBUGGING SMTP: found extension "ETRN", arg "
  "" DEBUGGING SMTP: found 'XXXXXXXA' extension, arg "
  DEBUG SMTP: Found extension "AUTH", arg 'LOGIN '.
  "" DEBUGGING SMTP: found extension "AUTH is LOGIN," arg "
  "" DEBUGGING SMTP: found extension "XXXB", arg "
  "" DEBUGGING SMTP: found extension "XXXC", arg "
  "" DEBUGGING SMTP: found extension "PIPELINING", arg "
  "" DEBUGGING SMTP: found "8BITMIME" extension, arg "
  "" DEBUGGING SMTP: found "DSN" extension, arg "
  DEBUG SMTP: Found 'SIZE' extension, arg "10485760.
  SMTP DEBUG: false use8bit
  MAIL FROM: < [email protected] >
  250 sender OK
  RCPT TO: < [email protected] >
  250 recipient OK
  DEBUG SMTP: Addresses verified
  DEBUG SMTP: [email protected]
  DATA
  Send a message 354 end with < CRLF >. < CRLF >
  From: [email protected]
  Answer: [email protected]
  To: [email protected]
  Message-ID: < [email protected] >
  Subject: [EO PORTAL]: reminder: payment by credit card for your order 10000116
  MIME-Version: 1.0
  Content-Type: text/plain; charset = "UTF-8".
  Content-Transfer-Encoding: City-printable
  
  Dear user,
  
  You have order? aupr? s d? EUMETSAT the following items:
  
  Description, quantity?, unit price
  
  -Meteosat Key Unit (MKU), 1, EUR700.0
  -Meteosat Station key Unit (SKU), 1, EUR400.0
  -Direct Metop Readout Station key Unit (SKU), 1, EUR400.0
  
  Total amount: EUR1500.0
  
  
  We remind you that you can now proc? der car Microsoft payment by =
  You CR? said through Saferpay. Please click on the link below and follow =
  instructions for e:
  
  
  We will send you the order items? s d? s r? reception of your pai =
  change. = 20
  
  Pour any question or if you want to change/cancel your order, ve =
  contact us to uillez? [email protected].
  
  Best regards, = 20
  
  .
  250 OK
  QUIT SMOKING
  221 listserv.bla.int so long and thanks for all the fish
  -----------------------------------------
  
  * (3) - this is the method that I use to send email *.
  -----------------------------------------

  public int sendEmail() 
       {
            //Set properties
            Properties properties = System.getProperties();
            properties.put("mail.smtp.host", this.mailSmtpServer);
            properties.put("mail.host", this.mailSmtpServer);
            properties.put("mail.transport.protocol", this.mailTransportProtocol);
            properties.put("mail.mime.charset", this.mailMimeCharSet);
            properties.put("mail.content.type", this.mailContentType);
            properties.put("mail.debug", "true");
            
            Session session = Session.getInstance(properties, null);
                 
            //Create a MimeMessage object
            MimeMessage message = new MimeMessage(session);
            
            //Add FROM
            InternetAddress[] from = new InternetAddress[this.fromEmailAddresses.size()];
            for (int i=0;i<this.fromEmailAddresses.size();i++)
                 from[i] = new InternetAddress(this.fromEmailAddresses.get(i));
            
            message.addFrom(from);
            
            //Add TO
            InternetAddress[] to = new InternetAddress[this.toEmailAddresses.size()];
            for (int i=0;i<this.toEmailAddresses.size();i++)
                 to[i] = new InternetAddress(this.toEmailAddresses.get(i));
            
            message.setRecipients(Message.RecipientType.TO, to);
            
            if (replyEmailAddresses != null && replyEmailAddresses.size() > 0)
                 {
                 //Add REPLY-TO
                 InternetAddress[] replyto = new InternetAddress[this.replyEmailAddresses.size()];
                 for (int i=0;i<this.replyEmailAddresses.size();i++)
                      replyto[i] = new InternetAddress(this.replyEmailAddresses.get(i));
                 
                 message.setReplyTo(replyto);
                 }
            
            //Set subject
            message.setSubject(this.emailSubject, this.mailMimeCharSet);
            
            //Set the email body and
            //Header "Content-Transfer-Encoding" attribute (otherwise, it takes the devault set by the JVM)
            message.setText(this.emailBody, this.mailMimeCharSet);
            message.setHeader("Content-Transfer-Encoding", "quoted-printable");     //"quoted-printable" / "7bit" / "8bit"
            message.setHeader("Content-Type", "text/plain; charset=\"UTF-8\"");
            
            //Save all attributes into the message object
            message.saveChanges();
  
            //This is the line responsible for dumping the contents of the email body in the log file shown in (1)
            logger.info("Email Contents:\n\n" + this.emailBody);
            
            //Send the message
            Transport.send(message);
            
            //Return success
            return 0;
       }

  -----------------------------------------

  It definitely seems to be something related to your Tomcat environment, but I am at a loss as to what it could be.

  If you can run your Tomcat server with a file for debugging different mail.jar made me know at [email protected]
  and I'll send you a file mail.jar with debug output more to try to track down the problem.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• How can I configure analog several outputs at the same voltage

  I need the same voltage to 14 different outputs analog output. The only way I can think of that is shown in the attached image - IE. build a table. With 14 this looks messy - can you imagine how it would look with more! Is there a more orderly way to do this?

  Dave

  Hello

  you want the same voltage setpoint for all channels so u 'initialize the array"give the dimension size you want, I think this will help u

• Get Queue Status output / empty the queue

  Hey everybody,

  I am trying to create the program that will record all the data in a queue after a number / deadline is met.

  However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

  The output shows that it is "an array of clusters of 4 elements..."

  My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

  Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

  However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

  I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

  Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

  Thank you!

  What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

  See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

• computer laptop switing to the french at the beginning of

  I have a PC that has been provided by a French company,
  a lenovo thinkpad, as a result of
  the default keyboard at startup language is French. This causes a
  problem with the connection because at this point, the log on screen, the
  the language is the French and gives him therefore press "Q" key "A" and
  other keys are also very different. Once connected then the UK keyboard setting
  for the user takes over and the keyboard is OK. Can I use the shortcut keys
  Left ALT + SHIFT to change the language to open a session and it works, but is at - it
  a way to restore the default language of the British English keyboard to boot.

  Thank you

  Yes.  You should be able to put the logon keyboard by setting the 'Default user' preloaded keyboard.  A good article explaining how to do it is here:

  "How to configure the default keyboard layout when you connect"
    <>http://www.windowsitpro.com/article/configuration/how-do-i-configure-the-default-keyboard-layout-during-login- >

  HTH,
  JW

• Power output during the disk check currently not able to boot to the desktop

  Power output during the disk check.  Now, does nothing.

  I started my system, he said to check the disc. The disk check began, he had run for a while. Then my power is out for a few seconds. Once the power was back on that I tried to reboot and nothing. The monitor shows no info yet. Just black says no signal and turns off. I have no option to boot or anything else besides. What I can do. Thank you

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can connect the monitor to a different display port or connect another monitor if possible and check if it works very well.

  If the monitor is right, it implies that there is a problem with the graphics card or motherboard. In this scenario, I recommend you contact the manufacturer of your computer for help.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Mail: How can I configure an output of the view?

  How can I configure an output of the opinion-i am using my cable by MS Live mail email

  original title: notice of the Office

  Hello Felise,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.