Output of the model to the user of controlled output

Similar Questions

• Cannot type the password in the user account control prompt after activation of the hidden admin account.

  Original title: where to type the password of the user account control?

  I have a problem of user account control is it said to type an administrator password, but there is nowhere to type in it. I can't access anything on my computer because there is a password. My computer does not have an administrator account and I can not activate the administrator hidden with UAC on because I can't type the password. Where to enter it?

  Hello

  System Restore can probably help.

  To restore the system from DVD

             

  a. start the computer from the Windows installation disc

  b. Windows will automatically run the disk is empty, and will load the files; This can take some time. The

  c. Windows Vista install will begin charging.

  d. now, select your installation language, time and currency Format, and keyboard type and then click "NEXT" to continue.

  e. in the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.

  f. on the next screen, select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue

  g. you are now in the menu "Recovery Options.

  h. in the 'Recovery Options' menu select 'SYSTEM RESTORE'.

  i. the menu "Restore files and settings" is displayed, click 'NEXT' to continue. Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.

  j. now, you will need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.

  k. 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.

  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.

  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• turn the user account controll off__

  I want to disable the user account control and I did everythings, he said to do but still far, which can only make

  You forgot to tell us what "he said to do. If you really want to turn off UAC (not recommended):

  MVP John Barnett - turn off UAC - http://vistasupport.mvps.org/turn_off_user_account_control.htm
  Control User Guide step by step - account http://technet.microsoft.com/en-us/library/cc709691.aspx?ppud=4

  MS - MVP - Elephant Boy computers - don't panic!

• Impossible to activate the user account control

  Original title: user account will not

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  Please, don't say "user account" when you hear the user account control. They are 2 different things.
  Tell the UAC if you wish.

  Take a look at this tutorial

  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html
  There are 3 ways to activate UAC in this tutorial.

  If still no help, please do a check of the file system. It will look for corrupted files and it will try to repair if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• The language bar shows when the user account control appears, supposed to be hidden.

  I've been looking for an answer to this one so vain if this question has already been answered please point me in the right direction. I chose to hide the language bar after a reinstall of windows 7, but whenever the user account control appears I see the language bar sitting there, mocking me. I don't see any option to close, only to hide. It does not show during normal activity, only when the user account control POPs asking if I want to allow a program to run. It's driving me crazy.

  Thanks in advance

  Old post I know but I cannot believe no one could help you guys, I recently noticed this was happening on my pc, have no idea why, but I guess it was something to do with installation/un-installing new software. In any case, here is the solution, because I don't think that these guys have a clue of what you're going on, of course, lol.

  Click on:

  Beginning
  Control Panel
  Clock, language and region
  Regional and Language Options
  Keyboards and languages
  Change keyboards...
  Language bar
  Hidden
  Ok

  Now return to the regional and language options and then click:

  Administrative
  Copy to reserved accounts

  * Type password *, click on:

  System accounts
  Ok
  Ok

  If for any reason any you do not see a password for copy to reserved accounts, and instead, option you have this pop up with checkboxes:

  Copy your regional and language settings to these accounts:

  Default user account (new users)
  System accounts (local system, local service, and network service)
  Just check the two of them and ok.

  There's no more annoying language on UAC bar more.

• How can I make user custom interface e-mail allow the user to control the tests?

  Hello.

  I am totally new to TestStand and I try to use it to test a simple dll to a larger system, as kind of an assessment to see if we want to migrate to this system.

  I use TestStand 4.2 with LabWindows/CVI 8.5... He was going along fine, but now I'm stuck trying to customize the user interface

  Specifically, I want to have the user be able to control what are called in the order and be able to choose (through, say, a digital control) what inputs are sent to the object to be measured.

  I found a few examples, but they seem just to manage the display of TS data to the user interface, not * is * data of the UI back to TS...

  Is there a tutorial that handles such things?

  I'm seriously lost here.

  To answer your question, the best way to get info from the user interface in the file of the sequence is to do the same thing were the examples you were watching.  Except that your data will be the SequenceContext.  Then, you can use the nodes property or even the screws TS to set the properties inside your sequence.

  There may be a better way to accomplish what you want though.  Why not pop up a dialog box (written in CVI) in the (substituted in your movie file) PreUUT with a list of 'tests' of your sequence?  The user can select which tests they want to run.  Then the prerequisites for your steps which indicate the step execution based on what the user has selected.  The dialog box can also have entries that is filled to the sequence (with parameters) which can FileGlobals or people of the country or whatever.

  User interface messages are used for the duration of decisions or feedback.  It seems that your case would be more than one once a decision to run.  Unless they choose tests during execution.

  Hope this helps,

• How can I disable the user access control, for an update of a Web site?

  This is the site of poker for the best day of Milwaukee.

  Hello

  Access search by: click on Windows Orb/Start key > click on the text box and type "User Account Control" to get the shortcut to user accounts. You can disable UAC.

  However, the word of advice, be warned that disable UAC will allow any application and good or bad that gain access to the computer can cause damage to him.

  Don't forget that the site you access is safe and secure and if did the update, try to return to turn on UAC

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• How can I permanently disable and remove the User Account Control (UAC) on Control Panel?

  This feature on Windows Vista is really annoying when you do a presentation. I want to permanently disable and remove from the control panel.

  Hi Eyngel,

  If I understand you correctly, you want to disable or delete the user (UAC) of your computer access control.

  You can turn off the UAC, but do not remove it completely from your computer.

  You can let on that it is one of the security features of Windows Vista.

  To turn off the UAC:

  Go to control panel > user accounts > manage another account > at bottom of the page delete the control on the use of user access control.
  It should ask you to restart the computer to complete the process.

  I hope this helps. ----------------------------------------------------------

• How can I update the user interface controls in the UI thread

  Hi all

  I want to do a custom image to display this URL source support.

  I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:

  ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
  ApplicationPrivate::resourceManager: A user interface thread named method

  It's my code segment:

  class URLImageView: public CustomControl, public QThread
  {
  public:
      URLImageView();
  private:
      void run();
  
      ImageView* mImageView;
      Container* mRootContainer;
  };
  
  URLImageView::URLImageView()
  {
      mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100);
      mImageView = ImageView::create().image(QUrl("asset:///button.png"));
  
      mRootContainer->add(mImageView);
      setRoot(mRootContainer);
      start();
  }
  
  void URLImageView::run()
  {
      //get data from network
      //...
      //...
              //create image from binary data        Image* image = new Image(pixelBuffer);
      mImageView->setImage(image);
  }
  

  I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:

  synchronized (Application.getEventLock())
  {
          // I can update UI control here
  }
  

  Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?

  Thank you
  

  This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.

• How can I change the user account control?

  How can I change my user account control.  Admin password!  My ex-wife had an and changed.  She no longer lives with me.  She gave me a password, but it does not work. I tried "several times".  I'm frustrated and I get updates from Adobe, etc. and here to keep my computer up to date with new things.  Please help me change my user account.  Thank you.

  Hello

   
  Check out the link and follow the steps.
   
  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910
   
  To create a new user account, you must have at least one administrator account. Microsoft has a password policy, I suggest that visit you the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• The user account control Popup

  I am an administrator on my son's laptop and I can't get into anything of mine in Panel, including Parental control.  I have an account control user pop up asking permission to make changes.  It asks for my password, but there is no place to put it.  All I can do is click No..  Help!

  It sounds like the administrator (or your other account that is an administrator-level) has been disabled.  To fix it, you have to start safe mode (hold F8 when you turn on your computer) and activate it.  Rob Williams explains it here: http://techgage.com/news/uac_pop-up_with_no_password_box/

• I have a problem with the user account control restricting printing.

  Original title: problem of UAC Restriction...

  In fact, this problem only occurs on Windows 7 / Vista including our field is now progressing to it. The problem is that we still use an OLD way for ourselves print documents by a former software which will form the LPT port. We used to map the BP turbine as: "net use LPT3: \\print_server\printer / persistent: Yes.

  EVERYTHINS works correctly, the fact is that we can mount the printer on LPT port, but we cannot print on it. The only way we found to make it work is by disabling that turned off.

  Is it possible to change this and to let any user print to an LPT port, even if UAC is the highest value?

  I thank you for your answer and have a nice day!

  In fact, was how I managed to solve this problem by defining the rights for users to C:\Windows\system32\spool folder on the print server.

  In this case the UAC asking for something.

• I accidentally let something change of workstation on the user account control

  It was pretty sketchy, and the creator was 'Unknown', then I'm sure that it was not good. I kept clicking on 'no' and then I looked out of the screen and then apparently I clicked 'yes '. Is there a way that I can know how my computer has been changed? I used Norton to scan all my computer and nothing came. I'm just worried of what he changed my computer for.

  Thank you very much! I would appreciate if you can help me.

  Hi help please_468,

  What operating system do you use?

  I suggest that you want to run system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• The user account control UAC Proxy.exe

  Whenever my computer starts the above appears in a window saying that it is an unidentified program wants to access my computer.  If I grant access, my computer ends with major problems, especially IE.  All solutions?  I want to upgrade to Windows 7 but this first fixed!  Thank you.

  Hi mnsisu,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

  Method 2: A scanner online for any threat and try to correct
  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************