Output.VI - Digital missing as well as other vi'

Similar Questions

• Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

  Hello

  I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

  My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

  Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

  -Colin

  Hi Chow Ho.
   
  This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
   
  To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
   
  You can also check out the link below for more information:
   
  http://support.Microsoft.com/kb/940685
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• I seem to have lost my home button and bookmarks, as well as others of my web browser

  I seem to have lost my home and bookmarks buttons, as well as others, my web browser

  Don't see the menu bar not (File, Edit, View, history... (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

  Other issues: to correct the problems of security/stability

  Java Update: your version 1.6.0_19; current version 1.6.0.20 (important update 15/04/2010)
  (Windows users: do the update manually, very easy.)
  See: Java Update
  Do the update with Firefox closed.

• I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

  I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

  I tried to view the page on other computers running IE, and they also have this problem.

  Any idea of what could be causing this to happen?

  Thanks for looking in this people!

  I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

  Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

• My site is not displayed correctly on firefox, but works well on other browsers

  My site: www.karposveg.com is not displayed correctly on firefox. I have created some social media icons, but all of a sudden they started to display as hyperlinks or words out and get out. It's frustrating because it works perfectly well on other browsers, but I'm used to sort of mozilla. What exactly is the problem?

  The images are present on your own server:
  http://www.karposveg.com/wp-content/uploads/2015/09/Instagram.PNG

  <img src="/wp-content/uploads/2015/09/facebook.png" class="" style="border: medium none; opacity: 1;" title="Facebook" alt="Facebook" width="32" height="32">
  
  <img src="/wp-content/uploads/2015/09/twitter.png" class="" style="border: medium none; opacity: 1;" title="Twitter" alt="Twitter" width="32" height="32">
  
  <img src="/wp-content/uploads/2015/09/instagram.png" class="" style="border: medium none; opacity: 1;" title="Instagram" alt="Instagram" width="32" height="32">

• my computer keep updateing the same ie kb2789643 as well as other updates how to stop this from happening.

  my computer Dungeon set to day the same updates ie kb2789643 as well as others, how can I prevent this from happening. I did it for the last four days, the center of update of windows has installed to them all, but more and more again please help me what should I do to stop this?

  Hello

  Thank you for keeping us posted.

  It seems that the update of .NET Framework is getting damaged.

  You can download the .NET Framework repair tool and check.

  Reference:

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Hope this information helps.

• Photo Story 3 exports don't play well with other servers or video software

  I'm having a time very hard, Photo Story 3 download videos on our video at the request of Kaltura (hyperlink to our system) server. Exporting of YouTube of Papa John tried, but those don't work anymore. Y at - it any other export filter output files do PS3 (.) WMV or other) play nice with video systems like Kaltura? I need to get this working!

  I don't know that I'm dealing with video files. They are .wmv files and they play in Windows Media Player and can be imported into MovieMaker.

  On my Mac (Yes), I have the software installed which supposedly let me open and view .wmv files, but these come only up as audio without the video.
  This backup of my theory that there is something non-standard files generated by photo story .wmv... I have other software, including MPEG Streamclip for Mac OS and Windows, who simply don't like videos.
  Our Kaltura server accepts many video file formats, including .wmv and constantly-error on the photo story .wmv files. Ultimately, I had to put the video in MovieMaker, the export to DV, then convert it to .mp4 before I could do it on our server.
  Thanks for the comments, and @ Samhrutha, I'll repost the forum you suggested.
  -Mike

• After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs.

  original title: Internet connectivity problem

  After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs. Before that, it works fine. If I reboot, it goes back to works very well for this period of time. I noticed I can shorten or lengthen the time that remains active of programs I run the application, primarily GOAL and iTunes. If I do not use one of the people, he can stay for about 4 days, if I use both what it comes down to 2 days.

  About 2-3 months ago, my computer started to do this. I've been troubleshooting on and outside since then, but as it was not any extreem yet I was not too concerned. However, recently the problem has progressed. It started with she it around every 7 days, so I could live with it. However, I do not restart my computer every day, so I'm hoping to solve this problem.

  Information system on this picture:
  http://I219.Photobucket.com/albums/cc280/God-follower/ComputerSpecs.jpg

  Thanks for any help or advice you can offer.

  Hello God-follower,

  Thank you for using the Microsoft Windows Vista Forums.

  When this happens in what concerns the loss of internet connectivity is able to reopen and close Internet Exporer or will you you will get the same result with an error?  I suggest go to the link below for Windows XP support and include information from above.  Thank you!

  Windows XP discussion groups:
  http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx James Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Updated for first CC 2015, output presets are missing

  Updated for first CC 2015, output presets are missing, can you help me? There was a long list of presets, output for YouTube, Vimeo, Sony etc., a long list...

  If you're after the standard list then try to launch Adobe Media Encoder CC2015 first, then try first.  Don't forget to set the h.264 format you consult the relevant presets in this format.

• My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. have informed them

  My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. informed that they are unable to manually change the value on the other PC that seems strange or false to me, but could be due to several factors associated with the network? Advice, I can provide my team who will help you solve this problem?

  Reader 11.0.07 was the first version of the player that was able to digitally sign files that are not compatible with the use of the signature digital good reader.

• Section user and Windows Update missing in the setting of the computer in Windows 8, as well as other errors.

  Section user and Windows Update section of the computer in Windows 8 setting is missing.

  Open Control Panel > user accounts > make changes to my account in the computer setting.

  "Page not found. Sorry, the page you requested is not available, or you have found an outdated link. "is displayed.

  I already tried Microsoft scanner security, sfc/scannow, auto repair and record using a hidden administrator account.

  My power plan option page is also absent and when tried to open the parameter, "unable to open the access control editor. the activation requires the display name to stand under the CLSID key. Also, while trying to open the properties of the network connection, "an unexpected error has occurred" appears. I don't know if these problems are related.

  I agee with dietydiablo, it was not pleasant to have to do a refresh and reload everything.
  Also use even win 8 Pro with WMC.
  I could not afford to wait and to solve the problems, and the update was a faster option. But I keep an eye on it now that if it happens again, I know when it happened.

• Output 5V digital while gaining some HAVE

  Hello fans of LV,.

  I am confronted with (what I thought would be) a trivial task:

  I'm certain analog signals on a 6351 OR USB using DAQmx.  And I want to trigger an external device simultaneously.  So I want to start my task of AI, a digital to go HIGH output pin.  And when it stops, I want the PIN to go DOWNSTAIRS.

  I think actually that NEITHER provided an '' integrated '' signal for this... something I could easily move to one of the PFI PIN.  As a "HAVE busy signal."  But it does not appear that this exists.

  So instead, I thought I could do a task "HAVE simultaneous and DO."  It works well, except that the PIN HIGH when rest end tasks.

  Any ideas on how I can fix this?

  josborne wrote:

  Hmmm.  I don't think that the sample clock won't work because it is a pulse train.  It goes UP and DOWN for each point of the data acquired.  Actually, I want the signal stay high during the acquisition of all.

  I think you're right about using a PIN.  But I am confused how to implement in LabVIEW.

  I think I misunderstood what you mean by an acquisition, then.  I thought you meant just a single point.  Are say you that you will acquire a fixed number of samples and you need relaxation to remain high until there finishes the entire points series?

  As I said, I'm not an expert in routing of the signal, so there is probably a more efficient way to do this, but the simplest, you could take a signal from a digital output pin and split with one end going to the external device and the other end to the input trigger to HAVE it (probably that in software, but I don't know if you can split the signal in this case).  Configure separate tasks and the AI, no need to synchronize them.  When you start to DO it, the AI will trigger.  Then you just need to somehow disable DO when HAVE complete - but went too urgent?  If you do not need a precise timing for this purpose then just wait for the AI to finish, then turns off the DO.

• First Pro CC, Dolby Digital missing license for MTS / audio AVCHD import?

  Hello

  I'm in first Pro CC on Mac 10.8.4 importer MTS files captured on a new camcorder Panasonic of with V720 who recorded MTS / AVCHD files.

  When I add my project files or drop them on the timeline, the video looks fine but there is no audio data and I get the warning message:

  "This facility doesn't have a license to decode the Dolby Digital audio".

  I tried to move from 5.1 to 2 channel audio on the camera where it is the question, without change.

  The file plays fine on mac with VLC Player or MPlayer - mplayer's audio decoding with FFmpeg AC-3 codec. I imported the MTS files created with other devices (but probably with different audio codecs) first very well with my current setup.

  
  Any suggestions to get this video and audio working properly?

  Thank you!

  Hello world

  I had the same issues. MTS files with the caveat of Dolby. The solution is simple, and it would be wise to Adobe to communicate this more clearly:

  Apparently, our institution has got two codes license. In one, you, Premiere pro, but not a full working version! The problems that you all adhere to this code. I also had problems do not output MPEG2. So I went to look further on the net and found this on two license codes... Now, with the new code, I output MPEG2, and I can handle it. MTS files...

  I hope that I helped you with that!

• Continuous output of digital waveforms on PCI-6602

  I use 6602 PCI to get a continuous 1 MHz square wave output of DIO1 ~ 32 sequentially controlled by LabVIEW. I Ctr0 to generate a clock 2 MHz and used Ctr0InternalOutput as a source of sample for DIO1 clock ~ 32. I have attached the code and the texture as follows.

  The code works fine on PCIe-6251 and digital waveforms of 1 MHz is very stable.

  But when I run on PCI-6602 I got an error-200077 (you asked for: sample clock; you can request: on-demand).

  6602 PCI does support material timing? I found no information about this its specifications. If she can't, how can I avoid this problem and get what I want? Thank you!

  Yi

  Version: LabVIEW 8.2

  hardware: PCI-6602

  Hello

  Have you looked at the specification for the 6602?

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1123

  Click on "specifications".  Scroll down to "digital i/o".  Watch "Timing".  It clearly says "software".

  The DIO lines on this Board are not timed by the hardware.  They are clocked by the software.  The data sheet that explains very clearly.  That's why you see the error clock sample - that the Council can't stand DIO clocked by the hardware.

  The 6251 supports clocked by DIO material, so why your code works very well with this Council.  You can do the generation of signals with a 6602.

  Hope says.

  d