Overclocking failed! Error message in the BIOS

I'm in trouble, I think you can help me

When I turn on my pc in the BIOS screen, it says
"Overclocking failed! Press F1 to enter SETUP or F2 to continue.
Power surge has failed! »
After pressing F2 it boot but sometimes when I restart the pc, it does not start again.
I have reset the BIOS default and saved settings
I removed the SMOS battery and attach it again.
Lastly I reset CMOS jumper correctly in the main map, but nothing happened
Please help me solve this problem.

Youre 'road repair' wasn't quite right...

1, with power off, remove the battery, then put pin jumper CMOS position 1-2

position 2-3, leave for 5 minutes about, and then reset the PIN for 1-2 position by default.

Wait 5 minutes, replace the battery, start the pc.

you will need to reset the BIOS to the start-up of the pc, as the above information defines everything by default (as he left

the mfg). That also means the date and time must be set, the BIOS setting of performance value, then

go back to the BIOS menu & adjust for supplements, etc. Once through, set & save settings.

Tags: Windows

Similar Questions

  • Pavilion tx1410us - error messages from the BIOS disk Test

    My first post here so greetings and a happy new year to all.

    I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

    When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

    I ran check disk for bad blocks, but several seem to be coming.

    Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

    Does anyone have a reference to what the BIOS messages mean?

    With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

    It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

    If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

    Thanks in advance for any help.

    Andy

    Hi Andy,.

    The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

    Best wishes

    DP - K

  • Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

    Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

    Hello

    1. when exactly you get this error message?

    2 are you able to boot into the office after getting this error on blue screen?

    3. don't you make changes to the computer until the problem occurred?

    I suggest you to follow the steps below and check if it helps.

    Method 1: Try to start your system in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3: If the problem persists, then try to run the Startup Repair tool.

    Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

    Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

    Hope this information is useful.

  • 0x8100000A error message when the backup fails.

    When my system tries to make a regular scheduled backup, I get the following error message:

    The backup has failed.

    An error has occurred. The following information can help you to resolve the error:

    The last backup set cannot be found. Make sure it is accessible and it has not been deleted. Otherwise, create a new full backup. (0x8100000A)

    How can I fix it?

    I use Windows Vista Home Premium on an HP computer. Thank you.

    http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

    Unlike what you said here, Vista Home Premium does NOT have a backup of the computer.
    Read the info in the link above from Ms.

    You need Vista Business or Vista Ultimate or Enterprise Vista for backing up the computer.

    Make the backup file.

    See you soon.
    Mick Murphy - Microsoft partner

  • I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

    I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

    Original title: Chameleon engine

    I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

  • Error message on the new laptop

    Day 2 of Windows 8 - continue to take me an hour to do what took 5 minutes - main 'problem' is that I don't understand an error at startup - I click on continue and it goes away-while the message is on screen AVG icon will appear in the bottom bar but if I click on cancel or something else (sorry I forgot the other option to continue) new error message disappears and the AVG icon disappears from background.

    If anyone is interested, I copied the error message but it of a long and show below, along with details of my laptop - please put my mind at rest and tell me how to stop the message and put things (what) law.

    Thank you
    Ian

    Specifications of the laptop HP G6

    HP Pavilion Notebook PC g6 product name

    Product C5J46EA #ABU number

    8 64-bit Windows operating system

    micro processor Intel (r) Pentium (r) CPU B960 2.20 GHz

    6 GB system memory

    slot for memory 4 GB SODIMM Micron Technology 1 1333 MHz

    location 2 2GB SODIMM A - DATA Technology 1333 MHz

    1 Intel(r) HD Graphics graphics device

    card system 56.2 C 1841

    F.14 system BIOS

    1 Hitachi HTS547575A9E384 hard drive

    c: 678.57 GB (637,18 GB free)

    d: 19.3 GB (2.42 GB free)

    audio device 1 IDT High Definition Audio CODEC

    2 audio device Audio Intel (r) display

    power supply electric a/c

    Battery main charge 100% available

    error message
    See the end of this message for details on the call
    just-in-time (JIT) debugging instead of this dialog box.

    The exception text *.
    System.NullReferenceException: Object reference not set not absolute instance of an object.
    atAVUS.Form1.CheckUpdates)
    atAVUS.Form1.Form1_Load (Object sender, EventArgs e)
    atSystem.EventHandler.Invoke (Object sender, EventArgs e)
    atSystem.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
    atSystem.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
    atSystem.Windows.Forms.Control.CreateControl)
    atSystem.Windows.Forms.Control.WmShowWindow (Message & m)
    atSystem.Windows.Forms.Control.WndProc (Message & m)
    atSystem.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
    atSystem.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtrwparam, IntPtr lparam)

    Loading assemblies *.
    mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
    ----------------------------------------
    AVUS
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86) /AVUS/AVUS.exe
    ----------------------------------------
    Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    ----------------------------------------
    System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    System.Runtime.Remoting
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    ----------------------------------------
    System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
    CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------

    JIT debugging *.
    To enable just-in-time (JIT), the .config file forthis debugging
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    permit.

    For example:



    According to this site, it's the update anti-virus designed to help keep AVG updated and current.

    However, I wasn't able to find information about it on the site of AVG. Therefore, I don't know if it is officially included in the module use AVG or a third party. You can try to run without it for now and see if AVG updates or not. If Yes, then you are good to go. If this isn't the case, then I would say that it is an official part of AVG and that AVG may have to be uninstalled and reinstalled as a whole to resolve the error message.

    It may be interesting to send a request by email to know if you need AVUS AVG.

    It seems that some use AVUS universities to keep their anti-virus up-to-date based on this and it looks like they use with AVUS Sophos. If it's the same AVUS, then it more than likely is not part of AVG.

  • HP EliteBook 745/755/725 G3: Missing 'Label restore electronic tool' to fix the POST error boot in the BIOS 1.08

    The latest BIOS for the HP EliteBook 745/755/725 G3 made reference to a 'restoration tool electronic Label' to remove a MESSAGE error after flashing the BIOS to 1.08.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_160552_1&swEnvOid=419...

    According to the release notes: "NOTE: for systems that do not comes with BIOS version 1.05 or later, this utility may be required if the BIOS has been updated.» Visit the page of the BIOS and drivers on www.support.hp.com and follow the instructions using the Restore tool from HP on the electronic label. »

    This tool can be found on the support Web site.

    If flashing the BIOS is causing this problem for systems shipped with a version of BIOS before 1.05 why is the tool not available to correct the problem?

    Better question is why was - this BIOS update published at all if it can cause a system to stop for 15 seconds during POST if you do not have the correction tool POST message as described in the release notes and the POST message?

    Version 1.01 of the electronic Label restore tool has fixed my problem.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_162255_1&lang=en&cc=us&hprpt_id=HPGL_ALERTS_1873677&JumpID=em_alerts_us-us_Mar16_xbu_all_all_641843_1873677_LaptopsandHybrids_routine__/

  • My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

    Separated from this thread.

    My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

    Hello

    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    How to access Safe Mode

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    There are several methods to reinstall Vista.

    This can help you (download files and make your own DVDs):

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    ___________________________________

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    ___________________________________

    And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Them or us ask the right sequence of key.

    ___________________________________

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Get 8004FF83 error message during the installation of Windows updates.

    I checked why an update failed. He tried 3 times between 2/5 and 4/5 with this error message on the screen for updates. AST is a security update what to do.

    Hello

    1. What is the name of the update that failed to install?
    2. at what point the update fails (download or installation or configuration)?
    3 are you aware of any changes made to the computer, before the show?

    Method 1:
    Run the fixit available at the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2:
    Run the tool on your computer system update.
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    Hope this helps

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Remove the Error Messages in the content server

    Hi all

    In the model of my area, I'm running the code that determines if a file with a given content ID exists in the content server. The code works well, and the template renders as I expect. However, whenever I load the page, I get an error message in the content server if a file does not exist.

    Here is the code I'm running inside my model that checks for the existence of the file.

    <!-$dDocName = contentID & "_S"->

    <!-$executeService ("DOC_INFO_BY_NAME")->

    <! - $if StatusCode == 0 - >

    <!-DO SOMETHING->

    <!-$endif->

    Can I wrap this code in that would eliminate all errors that can see the content server? Obviously, I like to keep logging turned on, but I'm a bit of a "boy who cried wolf" situation going on right now in my logs.

    I appreciate any thoughts.

    Thank you

    Josh

    In fact, I changed my IdocScript to use a different Service, GET_SEARCH_RESULTS. This Service does not throw an error if the query fails, then it will not obstruct my logs. Here is my code if someone else is looking for a quick solution of the IdocScript test if a content item exists or not.

    content item exists

    This is probably a rather unorthodox solution, but the simplicity of IdocScript really shines when you realize how functionally private it really is.

    Thank you

    Josh

  • Error message on the update report

    I have a manual update report, which works very well.
    I added some validation.
    If the location of display of Error Message is error Page, then when the validation fails,
    does page error, and when they click ok, they relative to returns to the page of report and the report still shows error values.
    If the location of display of Error Message Inline in the Notification, then displays the error message, but the error values are replaced by the
    previous correct values.

    How can I keep the incorrect values in the form when I use display location Error Message is Inline in the Notification

    See you soon

    Gus

    You can use Collections to maintain the session state values. You can find a number of examples in this forum and to the outside.

  • Adobe reader 11 installation fails. error message: there is an error install adobe reader. Adobe

    Adobe reader 11 installation fails. error message: there is an error install adobe reader. Adobe reader installation error. NULL. tried to use the cleaning of adobe tool. using XP sp3. seems that adobe 11 is not completely uninstalled. It is because when the software adobe reader 11 is deleted in Add/Remove program. When the pc is restarted, 11 entry of adobe reader returns but it's like the fake entry as not given the size. Please help to correctly install Adobe Reader 11.  also tried:

    1 uninstalled, rebooted, reinstalled 2. installed from different locations, 3. deleted adobe keys of

    local machine and tried to install

    You also have Acrobat installed?  Acrobat is the creation of PDF files and Adobe editing tool.

    Have you tried Microsoft Fixit tool?

  • error message in the terminal window

    I created a new profile. And, in doing so, you work with a terminal window.

    During this process, I noticed this error message when I use FF
    I receive the error message in the terminal window and I can confirm that I see what you were using a new profile or old

    "Socket error [AGENT]: [object [object event] XrayWrapper]; readyState = 3. Maybe Helper does not work on xxxx or stop? "Console.Error: onepassword:"

    XX is a number - do not know if has been deprived so xxx.

    What does this message mean?
    I have problems connecting with 2 services I use. I can't even log a new question in my old account of support of ff. I have EDT cleared the cache, cookies, history, started in safe mode.
    I restarted the router.

    but nothing works
    ideas?

    I also have
    -restarted my system.
    -retested, and the message appears only when I use firefox

    EDIT
    solved by uninstalling the related to the addon of 1password desktop application. Desktop application is the mac version of 1password.

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

Maybe you are looking for