Overheating with Equium A60

Similar Questions

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• Overheating on Equium A60-155

  Hi all

  I've owned an equium a60-155 for almost a year now, it has been discovered, but recently it began to close, which I suppose is overheating.

  the vents are clear and unblocked, although the area around the Equium logo (top right of the base unit) feels very warm after a closed random

  I use the machine for work and play and sometimes watching DVDs

  for about 2 weeks, ao that the machine started randomly turning its self, without warning, the machine sits on a table and the underside and rear passages are clear

  There is no virus/spy/software advertising on my machine and all programs are updated

  Anyone know of a cause or a solution to my problem?

  Thanks in advance

  Jake Houghton

  Hello

  Well, if there are cooling vents are free and not dirty, so I guess that the cooling fans are working properly. In this case, what you can do is to check the settings for standby power.
  Try changing the method of control of the CPU to Auto. Also, check if the cooling method is set for maximum performance.

• Question about fan with Equium A60

  Are these 3 fan cooler units all use with the a60, keeping in mind that these things suck air under the laptop, and this machine tries to expel air in from below.
  concerning Mick

  Hello

  I know that these units. They are really useful and if you have a machine that becomes a kind of warm :) then such a device is always useful. If you really want to buy, please give some report how it works and if you could win a few degrees. :)

  See you soon

• I can't get my new scanner to work with Equium A60

  I can't get my new scanner (canoscan lide 70) to work with my a60. Is it because the usb ports are all hubs?

  Hello

  > it because the USB ports are all hubs
  Sorry, but this suggestion to me confused.

  I m also owner of a scanner and it s a simplest thing to connect and install it!

  I put t see any problems using the scanner.
  All devices should be delivered with the own installation CD and I guess that your scanner also comes with additional supports.
  This CD contains the description of the installation and the necessary drivers.

• "27049 internal error" when you use recovery with Equium A60-692 utility

  TOSHIBA SATELLITE A60 - 692

  I'm trying to fix a friends laptop. The laptop computer wouldnâ? t start, would go to the blue screen just before the came WinXP loading screen then will re-start. I used a USB 2.5 HDD enclosure "to copy important files on my laptop and then formatted the drive of my laptop. I put the HARD drive in the Toshiba and have used the CD of restoration via an advanced option. on exactly 9mins 50sec time on the recovery process, an error message appears (27049 internal error). After that, it goes to a screen of style BACK with a little more information. Essentially by specifying that the error is "cannot read FILE_BITMAP MFT entry.

  I cleaned the CD
  I swapped the CD drive with my laptop
  Quick formatting it formatted, it is full
  Used the basic option where it does itself and it ERRORS with - not enough space on the partition - there is no partition! or if there's empty sound

  What can I do?

  Hello

  I think that the HARD drive is broken, because if you receive an error message with words like "MFT" (meaning MasterFileTable) then you can expect that the HDD has serious problems.
  OK, easy to talk to it s fast without knowing the machine and so on, but I know a similar error and I can give you the advice to probe hard disk errors.
  You can do this with the help of the "ultimate boot cd" which is a very interesting tool when you need information about your computer or you want to just check if everything works well.
  Here´s the link to the downloadable CD image that should be on a CD:

  http://www.ultimatebootcd.com/

  Hope you can solve this problem...

  Welcome them

• Number of different questions with Equium A60

  reinstalled windows and is not install these audio and video controller controller, pci modem went sm bus controller, I have a toshiba EA60-155 someone can tell me what that what material is/where can I get the drivers of

  was soon paul

  Hello

  Why you didn t use the recovery CD?
  It's the easiest way to install the OS and it should works property because this CD has been very often in the trial.
  In my opinion, try to recover the operating system with the recovery cd.

  Good bye

• Equium A60 - blue screen at startup

  Hi... problem with Equium A60. Running on Windows XP SP2, when I start the computer I see the windows xp logo and then all of a sudden it is blue screen and try to restart. What could be wrong? Any sugessions...

  Thank you

  Try to start in safe mode. To do this turn on the unit and start pressing F8 immediately, in the advanced options menu, select Safe mode. Log on as administrator. When safe mode has loaded right click on my computer-properties online-online advanced settings-online Startup Recovery & -online the system failure => to uncheck the box that says automatically restart => click OK.

  Then stop and restart normally. Now when it bluescreens, you should be able to see the complete error message. You can have a STOP error with a lot of 0s in it. Write it down. Type the STOP in the Google code or support.microsoft.com and see what happens or post it back here, chances are that in this regard, there is a knockout. unless it's a hardware problem.

• Chip RAM Equium A60-155 works not

  I just bought a RAM chip of 512 MB SO-DIMM DDR PC2100 200pin for my equium A60-155
  After installing the chip and check the properties of the system, I learned that I have 192 MB of ram (upgrade front of quantity)
  If someone can help me and tell me what I have to do to get the ram chip to work, or if the chip is broken

  Hi Jack

  I don't know if you the chip memory is damaged or is not compatible with your device, but as far as I know your laptop works with PC2100 DDR - RAM (1280MB max) however I found some information on parts compatible with Equium A60 - 155 m.
  You can use:

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Equium A60-199 randomly shutting down - could it be overheating issue

  Hi, I am writing on behalf of a friend who knows his laptop A60 closing unexpectedlly... (she says that he stopped after a few minutes, or when she tried to open Firefox)

  Details of system
  Toshiba Equium A60-199 Model No.: PSA67E-00J00C8J
  18 GB free & 19 GB used
  512 MB OF RAM
  CPU Celeron 2.93GH

  Running Windows XP Home
  NIS 2006

  I took a look at distance and was about 30 minutes without any problem using FF logmeinitreach... There was nothing showing in the event log manager, for the time of day, that it would close down all before... so I was wondering if it is a faulty power supply?

  Everythng is going on well just clicked on the analysis of complete system of Norton Internet security which has not been run in a long time and the PC, stop NOW, it will not restart everything. ??

  Apparently she can hear some buzzing but nothing happens... (which I think might well be the blow fan)

  Advised her to let a little and about 2 hours later, she was able to turn it back on... I wonder if it could be overheating. ??

  Apparently he is 3/4 months than what was going on then ceased to happen and started again...

  Please can you give me some advice on how to clean it - other than to take it to a hardware shop

  I downloaded the A60 user manual and have themselves asked to confirm what show the lights - in an attempt to check overheating
  is the question...

  I've also read online "you can spray compressed air into the gills of admission but not airflow vents to help get rid of the dust and debris." I have looked at the manual and can see 2 lots of mouths... It is on the side and the other on the bottom, is e eintake the one on the side? I literally direct the air on side air intakes and the spray?

  When you ask him if she knows that when the fan is always, sometimes on, never an etc. she was thinking ot is ALWAYS on... who'd show up again overheating...

  Please notify
  tamba1

  Hello Cathy

  I also believe that the sudden stops are the result of overheating. If the dust is blocking cooling air flow grill is blocked and material can reach the critical temperature of material very fast. Sometimes you can start any application pre-installed, the CPU usage goes to the next level and laptop will suddenly stop.

  The laptop should be cleaned as soon as possible. If you have no experience with the disassembly procedure I recommend you contact the closest service and the laptop must be cleaned on professional way. It costs a little bit, but you can be sure that you use Notepad for a longer period of time.

  If you need the addresses and phone numbers to contact the ASP (authorized service provider) please visit http://eu.computers.toshiba-europe.com > support & downloads.

  Bye and good luck!

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• White with vertical lines colored on Equium A60

  Hello

  I'm new on this but really need your help. My laptop is around the age of 18 months and has always worked well. Last week, I plugged modem broadband via Ethernet cable and configure the broadband services. A few minutes after doing this, when I looked back to the screen, he went all white with vertical lines colored it. I rebooted the machine etc and that's all I ever get now. As soon as I turn on, it will just right to white with these colored vertical lines.

  I tried to connect an external monitor to it and that works very well. The laptop is a Toshiba Equium A60. I'm worried that the screen is burned, it is possible for a power surge or something like that to go down the Ethernet cable and the screen shot?

  Thank you

  Adrian

  Display features has nothing to do with the Ethernet cable. Test with external monitor is very good, and on this way, you can see if the graphics card is perhaps responsible for that.

  From your description, I think that the view is the problem. Of course, just intensive display test can give more answers.

• Equium A60 with defective built in memory

  Hello

  I tried to recover my Equium A60 with the recovery DVD and it does not boot to windows. I tried to install a number of different versions of windows and the error messages lead me to the conclusion that the module memory is faulty. The system came with 256 MB of memory and it is hard because it is part of the motherboard. My question is if I buy a memory module and install it in the expansion slot will be it be prevented from working by the faulty memory?

  Post edited by: binkey1st

  Hey Kevin,

  There is unfortunately no way to isolate the faulty RAM on your motherboard. Even if you install a second module of RAM the system always tries to use the built in so defective module.

  You will need to take you laptop to an ASP for the defective replace module.

  Kind regards

• Equium A60 does not work properly with the Logitech Quickcam Fusion

  If someone managed to use a webcam Logitech Quickcam Fusion with an Equium A60?

  I installed the latest available drivers and software and most of the time it screws right up to the operation of the computer. He ends by crashes so bad that I can't recover even using Manager Windows task! If I leave the USB cable connected to the PC, 9 times out of ten, it won't boot into Windows, until I have remove lead :(

  I installed the same software and drivers on my desktop PC and the device works very well every time and the boots OK with the camera connected to a USB port.

  Two computers use Win XP with SP2 and all updates.

  Hello Bill

  Do you have problems with the USB ports if you are using other devices? I really don? t know what can be the problem. Check the Logitech SUPPORT PAGE

  Maybe you'll find some tips there.

• Equium A60-152: cannot open Web pages with USB modem broadband

  Hey man
  Bought a second hand Equium A60-152 today.
  Everything seems to work fine, but when I connect to the net using my modem high speed external USB I can't open web pages.
  It of the connection ok but does not do anything when it is connected.
  What I have to disable the built in modem so it can work properly?

  Long live man

  Waigy

  Hi Craig,.

  You should not have to disable the built-in modem in order to use your connection high speed USB.
  In fact, I usually recommend having both connections defined (a normal broadband and PAYG dial-up version). How can I access my ISP even when I'm somewhere that is not allowed to wide band.

  I guess that you can access your normal home page of ISP correctly? In which case I would suggest that you check the settings of your browser and your virus protection and firewall options.

  Kind regards