Overlayeffect work in Desktop Viewer = always work in the Tablet?

Similar Questions

• The icons on my desktop page always returned to the left of the start screen.

  The icons on my desktop page always returned to the left of the start screen. I have to uncheck the "align icons on the grid. Any ideas why & how can arange the icons as I want! Do not know if by chance, but it started after I recently had to reinstall MS Essentials

  Hello

  I suggest you to follow the steps and check if it helps.

  a. right click on the desktop.

  b. choose 'Customize'.

  c. on the left side of the Control Panel, click on "Change desktop icons"

  d. uncheck "allow themes to change desktop icons."

  See also:

  Show or hide common icons on the desktop

  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-common-icons-on-the-desktop

  The desktop (overview)

  http://Windows.Microsoft.com/en-us/Windows7/the-desktop-overview

  I hope this helps.

• The icons on my desktop page always put to the left of the screen

  My OS is XP Home edition and as the title suggests the icon all go to the left, little matter what settings I use.
  Auto arrange
  snap to grid
  lock web items on desktop
  and it is not a difference how to sort the icon is

  This happens whenever I have "disconnect" and reopen it.  Also when I get off but by clicking on "change user" with the "lock web items on desktop" enabled.  If I do not activate, so I seems to work, but if I stop, restart or logout icon all go left, little matter that parameters, I chose.

  Any help will be fully welcomed.   More details the better BTW.

  Thank you

  Hi Bullitt7,

  ·         You did changes to the computer before the show?

  Make sure you have turn off the Auto Arrange icons. To do this, follow these steps:

  a. right click on the desktop, point to view, and then disable option Auto Arrange icons.

  You can create a new profile on the computer and check if the problem persists. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

   

  Let us know if that helps.

  The only changes I made was that I deleted Norton 360 anti virus program and installed AVG free anti-virus.  Some potentially also removed the virus files.  Other profiles 2 user work well.  I'll try what you suggested above by creating a new account. Wish me luck and I'll let you know what happens

• Zoom no longer works with the tablet or mouse

  Im working with a Wacom Intuos Pro and everything worked fine, but now I can't zoom in more. No matter what I use: touch, touch or even ring the mouse wheel, pls help I need this so much!

  Hi GeorgMaximus,

  Can I have the following details:

  • Version of Photoshop
  • Type of operating system
  • Are you able to zoom an image all holding the key Ctrl + (Windows) or Cmd + (mac) keys?
  • He works in another Adobe except Photoshop application?

  Concerning

  Sarika

• Overview desktop version-Chrome constantly makes the tablet version

  Is there a setting in Chrome to fix this?

  -Jack

  Hello

  I tried to visit landcordesigns.businesscatalyst.com on my desktop in chrome and its head office access only.

  Have you tried my suggestion to delete cookies of the Chrome browser, then try to visit the url landcordesigns.businesscatalyst.com.

  Also try to visit the chrome url in another machine to check if it of happening here or not.

  Concerning

  Vivek

• Minimum height and width does not work in the responsive project

  I'm working on a responsive project in Captivate 9, breakpoint Office, for one of the items minimum height 50px and Minimum width to 50px.

  In points out of office and Tablet, she gets no smaller than 50px. However, breaking Mobile, point it turns into 32px Min-Height and Min-Width 4.0px.

  The 32px Min-Height and Min-Width 4.0px take a coral color in the breakpoint Mobile.

  Why don't the 50px which was update to stop Office remain the same on all breakpoints?

  What is the purpose? A 50 x 50 pixel png? I just create a project that is sensitive with a png of 200 x 200, placed in the desktop view and then set the size of the object and the height to 50 pixels. When I pass between breakpoints, the size remains the same. The size and position properties are all a light purple color on each breakpoint, which I guess means that these attributes are inherited from the Office discovers.

  If the boxes under "Height" and "Width" have transformed a coral-colored, I guess that means that these attributes have been changed for this breakpoint.

  And you obviously already know. I guess that I'm just trying to say that he expected to run, as it does for me!

  You are able to adjust these modified figures go back to your desired size? The same thing happens if you create, say, a dynamic square object in the view of the Office? Have you tried right clicking on the object in the desktop view and selecting "Apply position properties from all points of view"?

• Slow opening Excel file with MACRO and links from network on the Desktop view file server compare to physical PC

  Hi guys,.

  It's a weird thing.

  I just encountered a very strange problem when you open one of the excel files located on a Linux Samba Shared running file server.

  My laptop physics has a Dual Core 2 Duo 2.27 GHz, 4 GB of RAM and Windows 7 Pro 32-bit.

  My Desktop view has 2 vCPU (UC from host to 2.99 GHz/Core with base 16), 4 GB of RAM and Windows 7 Enterprise 64-bit.

  Note: The Desktop view is located on the FusionIO card locally on the server, so it is lightning fast.

  When I open excel file from my physical office, need you 3 seconds to open and 5 seconds to enable the content (because it is a big xls file with a bunch of MACRO and LINKS to a different worksheet)

  When I opened that same excel view Desktop file, it takes you 18 seconds to open and 1 minute to activate the content.

  Anyone happened to have the same problem with their environment to experience?

  Do you mind sharing some tips to solve this?

  Finally, be able to locate the problem.

  It was Sophos EndPoint AV for vShield that I deployed for assessment.

  Once I turned off politics, everything is back to normal.

  Couldn't believe that via vShield endpoint was causing all this because I tried Symantec and BitDefender for vShield before and no problem at all.

  Well.

  I hope that Sophos or VMware vShield team has a solution for me.

  Nice day!

• need to export the settings on the desktop without sync android works on the new desktop, sync works great android-android, android not desktop

  OK.sync worked so good between my laptop and my two android devices.

  Laptop now dead, do not have recovery key...

  Sync always seems to work ok between android, but I want all my favorites.

  Tried following previous suggestions:
  Installed copyprofile and copied it to my sd card.

  Reset account passwords.
  verified that I could connect on account.moz Portal OK (on two android devices) android devices
  verified that I could also connect to portal via the ok/desktop pc

  then said pc sync for the first time and copied the # s on my screen of android under settings/firefox sync account

  "He said ok, and my desktop look like screen it is synchronized UNTIL I got a message at the bottom of the screen saying:
  Key recovery DIFFICULT. Sync retries this action.

  Help, please?

  If syncing still works on Android devices so there is no need to generate a new key for synchronization and you shouldn't have a problem the pair from the desktop with one of Android devices via the pairing code 12 characters. Use the pairing code 12 characters is not expected to enter a key for synchronization, as these data will be recovered from the Android where you enter this code on the desktop. That's why the two devices must be online at the same time. Note that the synchronization code is a code of 26 characters and therefore is much longer than the code pairing 12 characters.

• The recovery disks do not work for the hard drive replaced in my Presario CQ4010F desktop PC

  Hi all

  I have a Compaq Presario CQ4010F Desktop PC (Windows 7 64-bit) in which the hard drive went bad. I bought a new hard drive which is a 1 to, the failed drive was 500 GB. So, I ordered disks system recovery, four in total. The disk labeled 'Use this first!' appear to be running fine, then prompted me to launch the next disc, which I assume is the 1 of 3 system recovery disk. With the computer, always, I inserted the CD 1 of 3 and have waited and watched as nothing has happened. I restarted the PC with the 3 disc 1 again and that will inspire nothing happened. Any help is appreciated in this matter.

  Hello:

  If you can't get the recovery disks to work (don't make sure that the keyboard, mouse and monitor are connected), then you can make your own windows 7 installation DVD and use that to at least get windows 7 installed and your PC back to the operation.

  Here's how.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• navto://relative/parent does not work in the Web Viewer

  Hello

  We have recently added in one of our app a menu navigation that points to a different section of a publication. We have also added the option to revert to the parent with the navto://relative/parent link collection.

  It works very well on tablets and mobile phones, but it doesn't seem to work in the Web Viewer version.

  Here is an example. The navigation menu is in the upper right corner, and the link to exit the publication is called "Quitter" (the last choice in the menu).

  https://app.tcmedianouvelles.ca/webviewer.HTML#project/e33d9e2b-e00b-4c5d-8348-de8a1df3174 9/view/WSY20160611-8dv5gUoLL / has...

  Is this a bug or this type of link is not yet supported in the Web Viewer?

  Thank you

  The navto://relative/parent format is not supported in web viewer. A tester told me that there is an additional complexity in the determination of the parent in the viewer web because Viewer users don't always access the app of the top-level collection.

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• Pinch & Zoom works in the content viewer but not the developer application

  I have all articles in PDF format, version of the viewer just tried 24. The work of pinch & zoom very well in viewer content but I just tried to create the application (simple edition for now), and the p & z does not work in the application of the developer. If that is not allowed in simple edition or am I missing something?

  The zoom allow PDF has been checked in the application builder DPS as well as advanced options in the first window.

  As always, thanks for the help!

  Yes, that makes sense. Some customers have reported problems pinch and zoom to trigger reliably with the pinch gesture. We're investigating.

  Neil

• CS-3-Viewer - works in the development system - a site failure (not all)

  I looked at a number of topics of discussion on the CS - 3 view Image slideshow doesn't work is not on the Web site.  I have the AC_RunActiveContent.js file located in my folder of Scripts on the site.

  I correctly opperating slide shows working on the site - is a good page - http://www.billyandgracetea.com/Contact1.html.

  A slightly flaky page is - http://www.billyandgracetea.com/Photo1.html.

  And the page fails totally is - http://www.billyandgracetea.com/Summer2010-Pics.html.

  The page but which totally fails - working properly in my development system-, fails on the site.  It works properly with the Play button, and also when I compile the page with the key 12 function (although I wonder if I want to allow the Active X).

  Flakey page - does not always work through all the 18 sides - sometimes running 1 to 7, then return 1, etc.

  The file system for all html files is the same on the website.

  How can I fix the page that fails completely?  18 side in the puff page - too many sides?

  On http://www.billyandgracetea.com/Summer2010-Pics.html

  This path is correct?

  Which points to

  http://www.billyandgracetea.com/pictures/flashslide-3AA.swf

  File not found

• I just reinstalled Debian 6 and Icedove. I copied the profile in my previous installation and update of profiles.ini who has always worked in the past.

  I wonder now to create a new account. Once I have a workaround to default imap and use pop3 I can't open Icedove. I get an error message that Thunderbird is already underway, and I need to shut it down or restart. I can't shut it down because it is not running. pstree and top do not show it so there is no pid to kill. Given zero annoys me to create a new account and the same problem.

  I have never had any problems in the past. Copy the old profile at .icedove and by changing the profiles.ini always gave me my address list and my old emails. Import, said book mail and address were imported, but it didn't.

  I like Thunderbird and hesitate to throw. I don't like Evolution, but I use it maybe and try to recreate my address book. What a waste of time!

  Alaric

  I was not able to find a lock file. However I deleted profiles.ini and it copied from the backup and that seems to work. The lock was probably hidden somewhere in the .default file.

• When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, / all this started to happen after u

  When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, /

  This has happened

  Each time Firefox opened

  == After Update/update firefox

  Perhaps, you just need to wait for a while for Firefox download.

  Perhaps, it is an extension/plugin slowing your Firefox.

  When I close Firefox in the evening, it closes slowly and uses 50% of CPU. It unloads after several (30? 60?) seconds.