Owners Dell POWER supply problems. Pls help.

Similar Questions

• Pavilion a6655f: hard drive or power supply problem?

  A few days ago, I was trying to low loading part of the steam.  My download speed is 30 kbs, obviously not good.

  I did some basic checks, malware, viruses, etc., but did not find any problem.  I did a diagnostic check and got a BIOHD-8 error code, which indicates a hard drive problem.  I decided to try to reset the computer back to the factory setting before changing the hard drive and once that I made and updated windows Vista for several hours, I restarted the diagnosis and he came clean.  Then I updated my software, including steam and a few games.  Downloads were fast and had no problems.  Later that night the computer started to shut down randomly, and I was unable to run any games.  Thinking it's maybe a power supply problem, I have replaced my graphics card with an elder who needs less energy.  I am able to run without any problems so far.  So, I'm looking for help in identifying my problem.  HDD problem, power supply, something else?  Any thoughts are appreciated.

  Pavilion a6655f

  Windows Vista

  PS 500 watts

  WD hard drive provided with the computer

  Thank you.

  Ken

  Hard to say without proper trials.

  You can use a hardware monitor HW Monitor to monitor tensions it is: http://www.cpuid.com/softwares/hwmonitor.html
  But there is no software that can test a power supply.

  You can get a tester of hardware like this too: http://www.newegg.com/Product/Produc...82E16899887005

  But there is really no of it will predict fails if the power supply, if you overloaded it, if its duration in time high, or if the power supply is a device of poor quality that can be subject to failure.

  You can also check that your power cable is comfortably installed on the computer and not frayed.  Try a different wall jack where there are fluctuations in power.

• Power Supply problem when installing Windows 7

  So I'll keep this short and to the point. I was upgraded yesterday from Vista to 7. Has made all the necessary updates and restart before installing 7. While it was installing, I weppe out of the room, came back and my monitor was empty... Silly me, I thought it was a reboot during installation. Futher glance, the monitor is in standby mode and the PC itself has been disabled. I waited about 10 minutes and it was always off. So I hit the power button, and it will not turn back. Tried the flipping of switches, different cables. Even called tech support, to get your warranty has expired and its $ 99 for me you tell the problem... Then he became the Lady on the line, telling me something I already knew... I got a power supply problem and I had to mapy 340.00 to repair... My question is this... It was just the stars lining up properly and my diet is to bite the dust while I have been upgraded or is there more behind it?

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• 3525 Deskjet printer power supply problem

  Brand new printer, I have been connected, printed OK. Once off, lights not again unless you pull on the power cord plug, then plug it in yet. Then can be turned on. But once off so the same problem all over again. I tried different plugs/Sockets, same problem with them all. Same thing happens when the printer is connected to the electric network without being connected to a laptop Desk/computer. Is this a power supply problem? Is it not ridiculous to do out of the box?

  Thanks for any help,

  Nicholas

  Hi Nicolas,.

  The latest firmware should solve the problem you are experiencing.

  Download and install the update of the firmware for your operating system below:

  32 bits:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128070-2&cc=us&DLC=en&LC=en&OS=4157&product=5241265&sw_lang=

  64 bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128071-2&cc=us&DLC=en&LC=en&OS=4158&product=5241265&sw_lang=

  If the printer connected to your PC via the wireless network and the update fails to install, connect the printer with a USB port in order to complete this update, or update your device from its screen as follows:

  http://support.HP.com/us-en/document/c03250770

  Kind regards

  Shlomi

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Power supply problem with Dell Inspiron One 2310

  Hello

  I have a problem with my computer Dell 2310, as far as I can see that the power supply burned out or something similar. Blue bright lighting supply cable indicates that power delivery is correct, but the power light on the power button does not respond.

  I suspect that the power supply is blown and needs to be replaced, I hope that a replacement is available on the list of spare parts and hits on how to properly check if my preliminary diagnosis is correct. I see no reason to suspect problems with the other componentts such as motherboard, memory, disk HARD etc.

  Grateful for advice on how to check my diagnose some material.

  Kind regards

  Axel

  Hi Axel,

  Sorry, no one answered. This is a user forum. We organise warranty service. You should contact Dell technical support in your country.

• XPS 8500 does not turn on, power supply problem

  XPS 8500 shipped on 18/01/13 so only a little more than 1 years. does illuminate, check psu and it's fine. reduce mobo or power button module. want to try to bypass the module by jumping pins on the mobo, problem is that I can't find any list of the pins for mobo or power button. Any help would be greatly appreciated since comp is barely over the years and cannot afford a new right now. Called Dell but no help it cause guaranteed missed, which took them 5 transfers and 45 minutes to tell me that :)

  If the green light on the power supply goes off, it detects an anomaly. So, it is not the power button that does not work.

  1. Visually check all ports USB for damage, misshapen or twisted for example contacts
  2. Try to turn on with nothing attached (no keyboard, no monitor, no mouse, etc.)
  3. Setting power off unplug and power button press / hold for ~ 15s open the case and carefully reconnect all RAM modules and PCI cards in their locations. Check the power cable from the power SUPPLY mobo and CPU. Cable control to all readers, video card etc... Pull the mobo battery and power press on/hold button for ~ 30, replace the battery (right-side-to the top).
  4. Check the cable to the module button before (F_PANEL connector on the mobo)
  5. Check before USB cable to motherboard
  6. Etc.

  The manual is hereif you need information about all of these connectors.

• G62-220US: G62-220US laptop power supply problems

  Does not charge the battery in the laptop intermittently, and the laptop intermittently won't start when the battery is low or taken out and the AC adapter is connected.  HP Diagnostics said that the battery is good, but reaches the end of its life and should be replaced soon.  What I found with troubleshooting, it is that when the battery is charged, the computer starts up and seems to work fine.  However, I found that the computer sometimes shows that the power adapter is not plugged in and recharge the battery even when it is connected.  For example, at the present time it is said that the battery is at 67% and the laptop is unplugged.  When I run the HP battery check it says the battery is working properly and that it currently pays.  I have the AC adapter is plugged in, the light by the power supply cord is white.  What I found online said that the light must be yellow when it is plugged and charge and white when it is plugged in and fully charged.

  My two question... first of all, is there a way to solve problems in order to determine if the problem is with the AC adapter or with something else inside the laptop?  Second, if I do not need to get parts for the laptop, like a new AC power adapter, where can I go to find out what part numbers do I need and where to order?

  I have found a solution to my problem this weekend, thanks to finally learn how to talk to someone at HP support.

  What I discovered with further troubleshooting, is that when the laptop is off and plugged in, the power light may be amber indicating that the battery has been recharged.  As soon as I would turn it on, the power light would become white, and the computer reports that it was not connected to current alternative.  HP recommends firstly that I reset the default BIOS, I did, but that didn't help.  The next step has been updated from the BIOS to the latest version.  It was a bit tricky, because the program doesn't make you that, while it is running on battery power, but I had made to tell things to do still.  After it was over, and the computer restarts, it of see the power adapter and charge the battery as it should.  Looks like the issue was a glitch in the software of BIOS, update to the latest version which fixed.

• T30 power supply problem!

  Hello

  My thinkpad T30 has the following problem:

  Turn - indicator and white lcd

  no thing happen just indicator on!

  I removed the battery for 1 min then try again so it works correctly, the problem me wit get more than 10 times

  over the last year.

  and now does not work in all cases

  What should I do?

  Here's a question for you? Your problem of power comes from the battery itself or the motherboard?

  This is what you can try to do it.

  (1) remove the battery and power cord

  2) press the power button on 10 times

  (3) press and hold the button for 30 seconds

  (4) connect the power cord only

  (5) try to turn on the unit.

  Your device should still be able to turn on with just the AC power. If you see only the 2 LED (the one with the circle and the 'Z' patter, which is the power on status, the other is one that looks like the plug of power supply) and your unit is still not lit, then you need to replace your motherboard...

  If you can power your device successfully, try plug the battery later and see if it will charge at maximum capacity. So go ahead and remove the power cord. If your unit loses power immediately at the time you remove the power cord, then Yes, you have a bad battery and must be replaced.

  Let me know if that helps you at all. Care.

  See you soon,.

  Mark

• Studio XPS 435 t / 9000 power supply problem

  My diet giving me in my Studio XPS 435 t/9000. The fan is very noisy, but otherwise there is no obvious symptoms. Since the system is about 5 years, I was planning to change some parts.

  My questions are:

  (1) what could be the cause of the fan to be strong, and what are the potential problems with that?

  (2) a system of 435MT 475W PSU would be compatible, or would I need specifically a 435 t?

  The first thing I would do is keep the Office of your garage. Open the side cover. Use compressed air can and blow all the dust that has accumulated in the tower. Blowing from the rear of the PSU and the inside of it. Replace the cover and retest for the noise of the PSU. The power supply 360w on Studio XPS 435MT will not work. The only Dell validated PSU for the Studio XPS 435 t / 9000 has been F217J 475w. The best video cards, we validated our eating 475w were:
  2XTG4 AMD Radeon HD5870
  5X2CH Nvidia GeForce GTX260

  You might consider installing a power supply of higher power, but with a single card video, you need something bigger then a 650w. You could then spend the video card for sale retail Nvidia GTX660.

• With Tecra750DVD power supply problem

  My laptop recently decided to refuse to turn on when I turned on. There is a yellow light in the position of "power" over the front of the machine, but it won't start. I tried all the options: Power Supply Unit only, only battery, Power Supply Unit + battery and nothing works. Fuse is good in the plug of power supply. Battery is less than 12 months.

  Hello

  You can remove the battery completely when problemshooting this kind of predicament.

  First of all - what impression the power button? Does it feel as it should? Refers to how it used to feel? If this is not the case, check if there is an active "lock" behind it.

  Some models have a safety lock to keep the machine from accidentally start in a bag or two.
  Please look at the LED that indicates that your adapter is connected. When you try to switch the machine on, what is happening with this LED? Always the same fixed green light or suddenly out or flashing?
  If out, please try to get your hands on another adapter (borrow prefferably). If it flashes then try to remove the AC adapter, remove any option that can be easily removed, CD/DVD, memory, expansion card PC and so on.
  Try to restart it (remember to join HQ again). Even? If Yes, then sorry to say I think that your machine needs service. If this isn't the case, then there could be hope.

  Disconnect the AC and put back in place the units that you have deleted before, one by one and after each unit, try to restart the machine.
  If it starts fine, remove the unit and reconnect the next unit. Perhaps you will find that there is a problem with an external device (memory, CD, PC Card and so on), then at least you can continue working more or less as before the problem.

  Good luck

  Tom

• On Satellite P100 power supply problem

  Hai
  I bought the new laptop Satellite P100. Suddenly it does not start (no power to notebook) and the same time, I have only checked by the only power a/c no result, also do not charge the battery. I put t know what is the reason. Can someone give suggestion?
  Thank you bye.

  If the power light is blinking there is probably a problem with the electronic power supply. In this case, the laptop sends flashes code. Read this code, technicians can identify the problem.
  Please, don't waste your time but the closest service provider contact allowed in your country.
  After 18 months of that guarantee must be valid (it depends of course on where you live) as well as the repair must be free.

• HPZ620Workstation and Evga Titan SCBlack POWER SUPPLY PROBLEM Edition

  Hello world

  I bought (Evga Titan SC Black Edition), but I have a problem with my power supply hpz620

  http://www.plugloadsolutions.com/psu_reports/HP_S10-800P1A_ECOS%202609_800W_Report.PDF

  I have two xeon processors (2 * 135W) and my question is the graphics card has enough power to do with the rest?

  Second problem is the molex cable I have only one. What is the best solution for me?

  Edition of black titan sc EVGA specification

  Performance

  NVIDIA GTX TITAN BLACK

  Hearts CUDA 2880

  967 MHz Base clock

  Boost 1072 MHz clock

  Memory

  6144 MB, 384-bit GDDR5

  7000 MHz (in force)

  336 Gbps of bandwidth

  Hello:

  You can also ask your question on the HP Business Support Forum - z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U4CnZ-lOW9I

• HP Envy Pheonix 810-210: Possible POWER supply problem?

  I bought the HP Envy 810-210 a Phoenix earlier this year and recently replaced a 645 GTX graphic card a GTX 960. When I replaced it I noticed the power cord was appropriate is more good in the power supply and can fluctuate a little. Now when I move my PC, the power cord will be disconnected and will Crackle. This turns off my computer and I have to tinker with a correct position in the socket to restart.

  What would be the recommended action for this? Is this a problem of cord or plug, do you? Y at - it a power supply that matches or is better than that which is currently in my computer (here), which will be a fit if it needs to be replaced?

  Hello

  The CX600 Corsair or CS650m would be an excellent choice for a power supply.

• Strange on my Satellite A100 power supply problem

  Hi I hope it's just me in Sun.

  I plugged my power on my laptop today and found that no power is getting to the laptop. I checked all the obvious things like the fuse and have even tested the output of the power supply with a multimeter and I get what looks like the correct voltage.

  However, when the power supply is plugged into my laptop blue "alternating current" does not and windows wants to say I'm running out of battery.

  Someone else had this problem? It is a work of repair and return? (I hope really not).

  Thank you

  Doug

  > Is this a work of repair and return
  I'm afraid, m Yes :(

  But the question is; malfunction of what part?  :|
  Maybe that your inquiry is good and everything is ok with the AC adapter / CC.
  This means that there could be something wrong with the laptop itself.

  Maybe it's only one loses the connection between the plug and the motherboard or most serious problem as a malfunction electronics power?  :|

  Who knows. It of very difficult to say what's wrong without any diagnostic tests
  I recommend you contact a technician in your country. He could check the laptop and found much faster fault as a user simply ordinary like you and me.

  Good luck