owners manual laserjet pro cp1525nw

Similar Questions

• HP Laserjet Pro CP1525nw, WiFi does not work

  I need help to connect my HP Laserjet Pro CP1525nw printer to my Alienware computer.

  I tried setting up as a wireless printer and nothing I do works.

  I tried to use the CD Rom supplied with the printer. I also downloaded al the drivers on the HP site and tried those.

  After each attempt to set up the printer for wireless operation, I removed / uninstalled drivers and software and all reinstalled as directed.

  When you attempt to install ast I selected the Option that is suppose to set up an Ad Hoc device.

  I have reset the printer settings to factory default, active internal wireless system (on) and blue light (on) indicating that the printer is wireless and transmission mode.

  My computer is not identiifying or acquire the HP printer?

  Overview - problem number 1. After inserting the CD-ROM installation, following the instructions on the screen and observing the facility to deal with "that took a lot of time" instlation process gets to 99% and stays there for a long time. "After a long period of time a MESSAGE of error to indicate (to paraphrase)" process went long to complete "if it please restsart your computer and try reinstalling the device..." I repated this step several times over a few days and several hours without success.

  Note: The only success I've had has the printer with the USB port connected to my infographic.

  Additional information: our home network is ATT Uverse all-inclusive (telephone, Internet, cable)

  My Alienware computer is connected to the internet through Att Uverse, no problem.

  Operating system - Microsoft Windows 7 Ultimate with all current updates.

  Viruse protection - McAffee Security Center (computer is fully protected):

  Any suggestions, comments, instructions, would be greatly appreciated.

  Kind regards

  John Rapp

  * E-mail address is removed from the privacy *.

  Hi JohnRapp,

  1. what happens when you try to install the printer?

  2. you receive an error message?

  Follow the following troubleshooting methods:

  Method 1:

  Perform the following troubleshooting steps.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  Check out the following link to install the printer on a home network.

  Installing printers in Windows 7

  Install a printer on a home network in Windows 7

  Printer in Windows problems

  Note: I suggest to copy the printer driver from the CD to your local hard drive and then try to install the driver from the driver on your hard drive.

  For more information, see the following link for the support of hp.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4052980&task

• Adobe files, do not print HP Laserjet Pro CP1525nw text via HP ePrint

  Hello

  I have two HP Laserjet Pro CP1525nw with HP ePrint printers Setup. During this installation, it worked. Can I send attachments for two printers with success. My problem is when I send a PDF with the two text and images includes printing images, but the text is not. Part of the original text is underlined, the lines appear, but underlined text does not work. I find myself with a printed version with images in the appropriate locations and black lines horizontally on the page which is the underscore for the missing text. Can someone help with this.

  I've tested this several email addresses, and you receive the same error. The adobe file print to another printer.

  Are sent also packed with Adobe PDF attachments? IF PDF attachments have not been created through this program, the possibility for them to print is not guaranteed.  What is the main e-mail client you send an attachment from?

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

  I just purchased and installed a printer LaserJet Pro 200 color M251nw.

  From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

  Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:
  
  In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
  http://support.HP.com/us-en/document/c01663233
  
  Kind regards
  Shlomi

• Windows RT and HP LaserJet Pro 400 M401w

  I'm trying to connect the HP LaserJet Pro 400 M401w to my Surface tablet running Windows RT.

  I tried to put in the IP, wireless sensor and using the USB cable.

  He is not with the IP or wireless detection.

  With the help of the key USB Cable it things is a CD Rom   If I add a printer and trying to choose manually the printer isn't on the list.  Any help would be appreciated.

  Hi SydsMom, welcome to the Forums of HP. If a product contains the necessary built in the RT drivers, he just needs to be plugged and RT Windows should recognize and install it.
  
  I did a search for "HP LaserJet Pro 400 M401dw Laser printer" with the: Windows Compatibility Centerand it's Windows RT 8.1 compatible.
  
  Microsoft provides these simple instructions: install a printer in Windows 8.1, Windows RT 8.1
  
  In addition, I'm not familiar with that printer, as it is a business model supported. I suggest posting in the trade forums, to get more input. You can do this HERE.
  
  Series HP LaserJet Pro 400 printer M401 Support

• LaserJet Pro CM1415fn: Upgraded IMac and Laserjet now only print in black

  Just upgraded my iMac, and the printer now not working is not in color. I see that the software is not available for Sierra implies that this may be the cause of the problem is it? Wish now that I had just updated! Software will be available soon?

  Thanks for letting me know @Fosse.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on printers and scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet Pro CM1415fn)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems, and that the printer is on a network, just for fun, try connecting the printer with a USB connection to see if you can print in color.

  You could have one do a manual uninstall of drivers and install the HP v5.0 for OS X printer drivers.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Click on the hard drive.
  Click first aid button, and then click Run.

  Try them HP v5.0 for OS X printer drivers.

  Thank you!

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• Re: How to reset the password or do a factory reset on Laserjet Pro M225DN MFP

  Please, I beg you. I asked to please. This printer is darn screwed up the password, not me. I copy - paste bro, it's the right password.

  I think the printer must strip certain characters when present you it, I used my stupid password generator that has very aggressive settings. So bad it does not tell us what characters are problematic. Both and the user manual has no instructions to reset as any other printer out there. Also too bad that someone has not yet responded. It is a new machine and I need the admin password please!

  Hi @Stormy4,

  Thanks for dropping by the HP's Support Forums! I see you try to reset your MFP HP LaserJet Pro M225dn.

  I sent you a private message on the Forums. Please go to your userpage to the right of your username, you will see your Inbox.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• LaserJet Pro M177fw MFP: confirm the fax sent

  Is there a way for the printer to "beep" when a fax is sent successfully? Right now you have to look at the screen of the printer to confirm the fax has been sent successfully. Just old habit I guess.

  Hello @WaltGrosch,

  Welcome to the forums of HP.

  I understand you wanting to your M177fw "beep" when it sends a fax successfully.

  I would like to help.

  If it's a wonderful idea, the Laserjet printer does not have this ability.

  You can configure the printer to print a confirmation page when a fax is sent successfully.

  I agree that the tone would be better.

  To set the confirmation page, you can enter the menu setup then the fax menu.

  M177fw MFP-HP Color LaserJet Pro operating manual

• MFP HP LaserJet Pro m125nw: MFP HP LaserJet Pro m125nw Scan software for Windows XP

  Hello

  Can I ask you if there is a download location for the scan for the MFP HP LaserJet Pro m125nw HP software as the unit didn't come with a CD.

  On the product page there is a driver listed for Windows XP, but the software is not available for download.

  Product page:

  http://support.HP.com/es-ES/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/solutions

  The product manual:

  http://h10032.www1.HP.com/CTG/manual/c03628466

  Thank you very much.

  Best regards

  Ryan

  Hi Ryan,

  Download and install the full software features below, which include the software of HP scanning as part of the package:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-124819-4&cc=us&DLC=en&LC=en&OS=228&productOid=5303404&sw_lang=&product=5318091

  Kind regards

  Shlomi

• LaserJet Pro M127: LaserJet Pro M127 FAX SEND AND RECEIPT COPY to COMPUTER

  Does anyone know how I can configure my fax. his print job send and receipt with conformation. I want also is, I want a copy of the image or pdf file each time I send or receive faxes on my computer . I installed the complete software configuration and my problem is that there is no for this device hp toolboxfx. what someone or in any case I can save the fax incoming and outgoing on my computer? I tried the windows fax and scan and its does not work. I've set up but I don't see any receiver and sending the status is pending. its not sending. Please help me with this. I need a download link for hp toolboxfx for my LASERJET PRO M127FN

  Hi @dOtfix,

  I see that you are wanting to save a copy of the fax on the computer and send faxes to the computer. I'd love to help you.

  You can send a fax from the HP software. Please, try the following steps:

  Click Start, click principally made programs, and then click HP.
  Click on the name of the product, and then click HP Send Fax. The fax software opens.
  Enter the fax number for one or more recipients.
  Click Send now.

  You should have access to the Toolbox, if you have installed the complete software of the Solution. The Toolbox of device HP for Windows is to check the condition of the product or to view or change the settings of your computer product. This tool opens the HP embedded Web server for the product. But it doesn't have the features of fax and the view from the Software Toolbox with this model.

  To open and view the HP Toolbox:

  Click the Start button and then click on the item in programs.
  Click on your category of products HP, and then click on the element of the device HP Toolbox.

  This information is on page 58 of the manual. LASERJET PRO M127FN.

  There are other software that you can download to fax to PC. Just do a search on the web and the search for Fax from my PC.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

  I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

  1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

  I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

  My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

  Please help, even the HP sales technician unable to answer me to this questation.

  Hello

  The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

  Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

  http://h10032.www1.HP.com/CTG/manual/c04475955

  You can download the HP Universal Print Driver below:

  http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

  As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

  It is a customized operating system version includes only the components of the operating system selected for specific needs.

  Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

  Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

  Kind regards

  Shlomi