Owners of Quadro 4000 - with first or After effects maximum clock speed

Hey guys,.

I installed my Quadro 2000 to a 4000 (latest driver 311,35 and I wonder if your clock of all speeds jump up when the first running or sequels?) Even if no changes or playback happens and GPU load is at 0%? Or are they doing they throttle down when idle? I use GPU - Z to check.

Mine joystick down once I leave the first (or After effects)... I was wondering if anyone else is having the same experience. I know they run really hot when the clock pseeds are up.

Also, I have powermanagement set to "prefer maximum" and I use mode video editng for the basic profile of New York City.

Salud.

Mine did the same thing as yours. I'm not under the latest drivers - still. I also updated the High Performance power management.

Tags: Premiere

Similar Questions

  • The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

    The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

    I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

    Yes, he does. I have the 980 and it works very well also.

  • First and after effects CC 2015 quit unexpectedly on launch

    Hello

    Unable to start first and after effects CC 2015, will "Adobe Premiere Pro CC 2015 close unexpectedly".

    tried the following:

    1 permissions set in/library/preferences/adobe and / library/application support/adobe

    2. clean the cache

    3. to remove the .plist files

    4. remove all plugins

    5 reinstallaling

    After effects will also:

    Last log message was: < 140735304400896 > < BEE_WorkQueue > < 5 > main thread of stacking: 8388608

    everything worked fine until I deleted two older versions CC of Premiere and After Effects

    El Capitan running

    MacBook Pro (retina, 13 inches, end of 2013)

    2.4 GHz Intel Core i5

    8 GB 1600 MHz DDR3

    Iris 1536 MB Intel

    Any suggestions?

    Hi DR DONK,

    Try this:

    -Use the CC cleaning tool to uninstall Premiere Pro and After Effects: Adobe Creative cloud cleaning tool

    -Create a new user account on the computer with administrator rights

    -Install and run programs in the new account

    Thank you!
    Regalo

  • First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

    Hello team,

    First and After Effects crashed.

    I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

    I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

    I deleted everything I found CC remaining manually.

    I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

    I don't know what to do anymore.

    Could someone help me?

    Virginia

    I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

  • How can I put a cc photography plan to a comprehensive plan so I can use first and After Effects and other applications as well?

    How can I put a cc photography (Photoshop & Lightroom only) plan to a comprehensive plan so I can use first and After Effects and other applications as well?

    See to manage your membership and your payment. Cloud Creative

    'Change for an annual membership or membership full creative cloud'

  • Why can not download first and after effects CC on my laptop?

    Why can not download first and after effects CC on my laptop? I don't have the option for the apllication creative cloud on my sidebar as well. He launched Adobe Download Manager instead. Software like Photoshop and Illustrator CC work correctly?

    Thank you!

    Jose Chama

    If she is not your system does not support it. It is that easy. See the system requirements for the applications.

    Mylenium

  • First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

    First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

    Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...

    Mylenium

  • Hotlinks for first and After Effects CS4 with titles

    I created a Rolling title in Premiere Pro CS4.  I would like to create a dynamic link to get back the title in After Effects CS4 to add effects that appear in the first.  I watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get there.

    Also saw something in these forums about the problems using dynamic links with titles (as opposed to regular pliers?)

    And something about the Premiere and After Effects projects being saved together? in the same folder - is that correct?

    So, could someone explain to me if this is possible and the right way to do it?

    Thank you

    First titles are usually not supported æ as separate entities, since they do not exist as such. Only the titles added to a timeline of the Organization will be present themselves, but can renderings and merged with the background. So, essentially, that it is not the best of ideas to create even titles in first in such a scenario - you can only end up seeing a ton of solids in the placeholder or a completely black canvas. If this is the case, make the titles to separate TIFF or PSD with adequate transparency. And Yes, the projects must be saved in the same location relative to avoid lack of sequences and make mistakes...

    Mylenium

  • Import of a blur to perform first in After Effects.

    I have a legacy composition which is a kind of an outro to a video where a bar falls, blurring the image behind when he falls. The blur effect is an adjustment layer. I use the Gaussian blur effect. What I want to do, is to be a transparent video that I can bring in a first project and the blur of the video below. My problem is:

    When I import the model of EI using Adobe Dynamic link. NO BLUR SE PRODUCT!

    With a background in the AE comp will be blur the background. with no background that no blurring occurs. It seems that the Prime Minister treats like a transparent video not AE comp so no background blurring = no blur.

    I'm sorry if it's confusing, but I don't know how else to put it.

    Thanks for your help in advance,

    Arnold

    It seems (if I understood) that you want an adjustment layer in the comp in After Effects to "adjust" the video tracks in the first.  It does not work.  The adjustment layer affects only the layers in After Effects.

    You will need to recreate the effect in the first (not so difficult if all what you do is a blur), or put the video you want to assign in After Effects.

    Unless I misunderstood...

  • My (not so great) experience with Premiere Pro &amp; after effects CC 2015 after barely a day of use.

    Right off the bat, let me say that I wish that I had not being updated until 2015 CC this morning. I blame the hype and all the exciting videos, showing off the new features to deceive me in...

    After waiting more than an hour to install everything on my Mac at work, I fell quickly on the first question when continuing on a CC 2014 project in Premiere Pro. The project has had some 4K footage with clips made in them, who I pre-rendered for an obvious reason: smooth playback. Who had worked perfectly fine in CC 2014. But in 2015, CC, it didn't yet... at all. Reposting clips did not cause to run any tool path smoothing, nor did lower the playback quality, even at 1/16 of the resolution (while in 2014 CC that would be more than enough to cause a perfect playback).

    For the same project I also need to do some work in some After Effects comps. So I opened my project and immediately, I noticed that my keyboard pressings were not record 9 of 10 times. I don't think I have to explain why this is especially annoying (and why I went to pounding my keyboard with my fists...).

    As if this was not frustrating enough, mounting Panel started to act up and remained permanently in the foreground, whenever I started a RAM Preview (I use a Setup dual monitor and my editing panel occupies essentially the right monitor). There is no way to make any application to the foreground while RAM previewing, so I ended up having to drag my editing about Panel out of the screen.

    Also, is there a way to stop the new RAM made preview? I don't know it is because of the issue of keyboard or that there simply cannot stop, since the SPACEBAR and '0' on the numeric keypad does not a billion times another thing that frustrate me even more.

    To top it off, I had to also motion-track one, and you have probably guessed Cela has also worked like a charm! * Cough *. Follow-up went well, but as soon as I tried to stop the analysis and you press the stop button, After Effects simply crashed.

    So yes, it was about my day at work. How was yours?

    Allright,-all right, I'll get to the point; Where and how do I go back to CC 2014?

    I'm done trying to force on my eyeballs to the frustration, I'll give CC 2015 another chance when these problems are solved.

    Thank you

    Rick

    Hi Daniel,.

    I've been looking around on the Forum and just found an easier way to do this via the updater of creative cloud itself:

    How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

    The good thing is that I can now run the 2014 and 2015 versions without uninstalling one or the other.

    Thanks a lot for the tip and the response if!

    As for the issue of the first reading, I discovered that changing the rendering option in the project settings of the "GPU accelerated" for "software only" caused much less frame drops. This means that I can actually work with the 2015 first CC version! I'll stick however for now to the CC 2014 After effects version.

  • After effects CC 2014 problem: Image of the picture since the last link of the first CC-After effects burned permanently into new compositions of project.

    A picture of one of the clips that I sent to first After Effects by 'replace with After Effects composition' was definitely burned in After Effects and it appears now in each new composition of each new project, I have create as the background for such a composition.

    For example, I sent first, for a clip of a building to After Effects for the correction of the colours with Finesse and stabilization of the string, and then after that rendered finish and close all applications, now everytime I open After Effects for any other project, they are already created or brand new, each existing or newly created composition (in a command Mac N) you see the image of the building as the background of the composition.  If you create a new publication, although it remains empty of all layers, you see the image of the building.  If you have a composition already created with layers, when you turn off all the eyes of the layers, you expect to see black (Nothing) in the composition window (if it is the color you assigned to be like the back of the comp), but instead, you see the building.  If you change the background color of the model in the Composition settings, you still see the building as background.  If you make such empty composition (not layers) return you the image of the building, not black.  I tried to click around and through the preferences and even uninstall the application and reinstall, but it seems to be permanently burned in in the background of each model.

    Please, any ideas of what is happening and how get rid of?

    Thanks a lot for your help.

    URI

    Start with purge all your caches, included disk cache.

  • First (and After Effects) CS6 no longer opens!

    Hello world

    Recently, I worked on a project that requires a dynamic link between After Effects and Premiere CS6 on my MacBook Pro, which runs in OSX Mountain Lion. Everything worked great until yesterday, when I got an error message that says something along the lines of "Adobe Premiere has encountered an error. We will try to save your project and restart the first. "

    I opened the first, and that the same thing happened a couple of times, I was finally able to return to my project. Today, however, the same message appears when I opened it again. I went through the same routine again, opening, then then start again, but this time it did not work.

    Is not only the first not opening, it's show is even more error message. It simply goes to the loading screen and the infamous "death beach ball Spinning" is displayed. I'm forced to leave several times and restarted my computer with all closed applications. I also revived Finder (I honestly don't think that would help, but I tried anyway)-again, the sign of loading crashes and the SBBOD appears again.

    Instead of sitting there trying to fix and wasting my time, I tried to open After Effects to work at least on related compositions that were in my creation project. Next, I get this message before force After Effects closes automatically:

    "Last log message was: < 140735255806336 > < GPUManager > < 2 > Sniffer result Code: 3.

    .

    Generation of crash log, which may take a few minutes. »

    So, apparently this has something to do with my CPU or GPU? I am not really educated when it comes to GPU, so I don't know what to do now. I have a Version of CUDA 5.5.47 driver on my computer (I'm not entirely sure of how it got there in the first place...), and system of preferences has been advising me that it must be updated. I heard somewhere, on another forum, this may have something to do with it, so I downloaded what I thought was a newer driver version, even though it turned out just to be the same version (5.5.47) that I have already (which seems to be the latest).

    So, what do you think I should do? Is there something very specific that should be done? It has something to do with this CUDA thing? Is the best option, simply uninstall and reinstall?

    If you have any ideas, let me know!

    Thank you!

    This sounds like the known problem with the latest driver from nVidia.  Google for nvidia CUDA (and) driver archive download and install previous versions of the driver and CUDA driver and see if it corrects you upward.

  • Question of proportions when you replace a clip in Premiere CS6 with a Composition After Effects CS6

    Please help! When I try to right click on a clip in my timeline first and replace with After Effects composition, I can do it, but problems ensue.

    After Effects lights, but the composition will be in 4 / 3, even if the project and clip that I'm alters were the two 16:9.

    I was able to change the aspect ratio of 16:9 in After Effects and then change what I wanted, but an hour later, when I had finsihed, saved and went to the first, he smushed the clip replaced 4:3 in the first.

    To reitterate:


    When I replace a clip in first with a mock-up of the AE, AE opens in 4:3.

    I can change the model of EI in 16:9, but when I save and return to the first, there smushed the model of EI down to 4:3.

    What can I do to stop this?

    If you right click on the item in the project Panel, then select Edit / interpret the images you will see a Pixel Aspect Ratio.

    What did he say?

    If she says 0.9091 then change to 1.2121

    If she says something, come back and let me know. Then I will have a different answer for you.

    Also, what is the size of the frame of the video.

  • First Pro, After Effects will not, download other applications available

    Windows Vista, SP2, 32-bit Mozilla Firefox latest updates.

    At creative.adobe.com/apps, click on 'Download' Pr or Ae. Or download works.

    For AAManager.exe, the installation window appears, asking about 'Run' or cancel.  Click

    'Run.  He runs, initializes and AAM is displayed with 14 of the 16 apps.

    Installed a few applications that are available. Prelude works great after installing.  So, it seems to be App

    specific.

    First Pro and After Effects do not appear in the MAA.  Cannot install accordingly.

    Running a schedule tight. Grateful for the help to quickly solve this problem.

    Zero error messages generated.  Full CS running subscription service.

    The default is here:

    32 bit

    Video applications are 64-bit.

    Mylenium

  • Dynamic links with, Photoshop and After Effects

    1 intent: Im using Photoshop CS5 (PS5) & After Effects CS5 (AE5) to create a DVD for still CS5 (5) menu. I used the 'Film & Video' preset in PS5 do a standard HD x 1080px 1440 image format; who looks the same in AE5. My problem is in the PS5 size "Pixel Aspect Ratio Correction" is the size I want the universal size to be. Its a more elongated version that looks better to me, but works well with HD monitors (as this DVD will play on a computer 17 "laptop).

    Question 1: Is it possible to have AE5 recognize the "aspect ratio pixel correction '' of PS5 and set the parameters of that size in AE5 composition?

    ```

    Question 2: What are standard sizes for computer monitors that would work welll especially with the Dynamic Link AE5 and 5 working with PS5?

    Question 2: What are standard sizes for computer monitors that would work welll especially with the Dynamic Link AE5 and 5 working with PS5?

    I love my monitors that are be 1920 x 1080. For editing, etc., it does not matter. Size to see all the controls, etc. is nice. The important part is keeping the proportions. Again, first, After Effects do default. When you preview material outside these programs, especially HD, some players (things of sense as Windows Media Player, Quicktime, VLC media player, etc), won't get the proportions provided, particularly when you assign to the 'full screen '. They are likely to play your movie to the size of the screen, and it will depend on what is perhaps the "native resolution" of the screen. Look for the settings of these programs which retains the proportions.

Maybe you are looking for