Oxc000000d for code error Acer aspire R14 error code oxc000000d

Similar Questions

• My Acer Aspire R14 does not start with the cord of the charger plugged in with the battery connected to

  A few weeks ago, my laptop Acer Aspire R14 went totally blank. When I unplugged the power cord, it started right to the top, but at the moment where I plugged the power cord back inside would be closed. The battery dies quickly in this way, because it would not charge. I removed the battery then it started upward with the power cord. I thought it must be the battery, so I installed a new battery. which is not to change the problem.

  So, I ordered a new motherboard and after a few weeks, I received it today, installed, and I have always the same thing. It works well with the power cord plugged in until the battery is disconnected. But at the time wherever I connect the battery, everything stops, not to be revived unless I disconnect the battery.

  I need help! What could be the problem?

  Glad I could help.

• RAM and SSD for my new Acer Aspire R7 752-5893

  Suggestions for the type of RAM and SSD memory for my new Acer Aspire R7 752-5893? TX in advance.

  You will need RAM SO-DIMM 204 format pins for your laptop. DDR3-1600 (PC3-12800, also known as) should work a treat.

  Your SSD should have an MSATA interface, so depending on what is here right now, you can place in a Plextor M6M disc.

  There are a few live hidden on the chassis of R7 - you can take a look here and see how to open it, and then you will know what players and the RAM slots you have available.

• Best stylus or pen for aspire R14 (r3 - 471 t)?

  Hello ~

  so, I am a student in digital painting and I need to use a pen or stylus often

  I bought the acer aspire r14 that supports using a pen or stylus, but I really don't know one that works the best

  so if you have an idea please help

  Thank you.

  Go to Amazon.com and look for active stylus. I would like to watch those with most of the critics and the highest percentage aside to 5 stars.

  Read the comments of people who are bought and used them.

  Everything else is just an opinion of a person or two.

• Keyboard for acer aspire E17 E5 - 771G

  Hello.

  I am looking for keyboard replacement for this model: acer aspire E17 E5 - 771G
  Northern keys
  
  It seems that the keyboard and the upper plastic are too, see below.
  

  Photo of the model etc.
  

  Hello

  Yes, it is welded by ultrasonic (plastic pins resemble mushrooms). This is the reference number:

• Special characters (keyboard Alt sequences) on an Aspire R14... How?

  Hello. I recently bought an Acer Aspire R14

  On my old desktop I used to play with special characters all the time, especially for the sharp symbol (ALT 130), but now I just can not understand how do on my Acer.

  can you help me please?  What's the trick?

  http://Tools.oratory.com/altcodes.html

  Thank you

  Stef.

  If you are referring to, for example the number 1 next to the letter J, I have them; they are blue on my keyboard.

  but Ms words 2016, if I wana write an e and alt ctl with blue numbers 1,3,0 (the normal number of white on top will do nothing) it is a popup window appears and it does not...

  so for the web it's alt clt 1,3,0 blue, and for the words of Mrs is alt x like you said, or in the world, to insert, symbol, special characters...

  your link is a winner

  Thanks again man

  Stef, Montreal

• After trying to install sp1 on an Acer Aspire computer an error code came 0xc01a001.

  During the installation of sp1 on an acer aspire desktop is a 2006 or 2007 model and never had viruses, spyware or firewall protection load, the computer stops unexpectedly. There are 3 downloads, it was successfully downloaded and installed the first, about 30% of the second installation the computer turned off. Us have just installed Norton 360 software with protection virus, software firewall and spyware but had disabled to start the download of sp1. The computer when it is nine of the trial Norton virus protection. The computer is running Vista Home OS. Once the computer is turned off it rebooted and came up with a black screen and some numbers running in the upper left corner. When he stopped running 0xc01a001 came. We tried the fix windows without success, it does not start in safe mode. The error message indicates that windows is not shut down properly. I would be grateful for help to the person who owns that count it as me is not computer informed.

  Thank you, gmax3

  Hello

  What is the exact error code or error message?

  First of all, I suggest to disable automatic system error reboot and check the error code.

  Disable the automatic restart in the event of system failure

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  Perform a restore of the system, the Windows recovery environment and check if it helps.

  Make repairs to the system of Windows recovery environment:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Note: once you see the recovery options, select System Restore and go forward.

  Method 3:

  Run check disk/Repair of environment recovery to check and remove bad sectors on the hard drive.

  Make repairs to the system of Windows recovery environment:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Note: once you see the recovery options, select command prompt and run the command: chkdsk /r and press Enter to continue.

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For another reference related to the installation of Vista service pack, see the following Microsoft article:

  http://support.Microsoft.com/kb/947366

  Hope the information is useful.

• Acer Aspire es1 512 - Win 8.1 bing Win10 failed to upgrade now the code error 0xc000000f

  Hi all.
  Acer Aspire es1 512 about 8 months old... unfortunately was running that bloody Win 8.1 with Bing oem

  Started slower and slower start for no apparent reason... (+ 10 mins to start)

  Tried restoring win 8.1,repairreset palarvour and he just constantly stuck on auto repair, do nothing.

  Tried to upgrade to win 10 (the one where I'd install clean drive)... got so far and then projected black.

  Now when it boots up, I get the screen where it says that the image below

  Ok

  Just a quick update, so I'm not leaving this hanging.

  Scan found 100, in thousands of errors.

  During the next startup the laptop told me that there is no bootable operating system.

  The hard drive was dead as a dodo so he sent to Acer via UPS.

  They said that the hard drive was indeed defective and replaced the hard drive and sent it to me

  within 5 days under the 1 year warranty.

  Turn on the computer laptop and relocation of the stuff, I was immediately greeted with a "this laptop.

  can be upgraded to windows 10 '' unfortunately I don't think I'll try that again :-)

  Many thanks Acer for the fast turnaround and Ultra thanks for Ace Ironfly for taking the time

  to try to help out me.

• Adapter Acer Aspire M1640 Vista drivers 6 to 4 errors

  Hello

  I'm new to the Forum of Acer.

  My friend has an Acer Aspire M1640 running Vista Home Edition. In the Manager of devices under network adapters, there are four errors "all starting with Microsoft 6to4 adapt." The NVIDIA card works very well and can get internet. I followed the instructions elsewhere on the internet and uninstalled the Microsoft 6to4 (error code 31) card and then re-installed the component inheritance. The alert has disappeared. So I tried to remove other 6to4 errors that were... #15, #18 and card 6to4 #5 6to4 adapter 6to4 card. When I rebooted the computer, all four were present once again with errors. I tried to update the drivers for all, but I was told that they were already up to date. I tried the system restore because she had removed a bunch of stuff before calling me but the system restore points do not go far enough to fix what she was doing. The computer is very slow start and freezes from time to time. Any suggestions?

  Hello!

  I uninstalled the network cards and I ran the utility of the seller and found nothing on the manufacturer of the wireless adapter. Then... I just reinstalled the NVIDIA LAN adapter that you provided and restarted the computer and found that the adapter 6to4 errors disappeared. My friend does not use wirless internet anyway.

  The computer always starts very slowly.

  I ran a scan disk to check the material difficulties and he fixed one error. But it always starts very slowly. Whether in safe mode or not.

  Something I noticed while working on his computer is there are three different 'control' programs on his computer. Realtek, ATI and NVIDIA. They are likely a problem or conflict?

  I'm not very tech savvy, but I try LOL

  Thank you for your patience and your help

• Laptop does not start: error BCD on Acer Aspire M3-581

  Hello

  Acer Aspire M3 581PTG my son has stopped booting.  At the start, immediately after the Acer logo, it now shows a blue screen with the message:

  Recovery

  Certain required information does not appear in the data of Configuration startup file. File: \BCD Error code: 0xc000000d

  He then refers to using the tools of recovery and the media, but we cannot locate Acer recovery disks and do not remember if the laptop came with everything.  I started by using a normal 8.1 Windows installation CD and tried to use different repair options, but nothing worked (perhaps because Acer has a SSD and HDD so need a specialized repair utility?).

  We contacted Acer but just received a generic response to do a factory reset.  If anyone has encountered this error or is able to offer a solution?

  Thank you.

  Try this:

  http://itsolutionsblog.NET/solution-to-your-PC-needs-to-be-repaired/

  If you still have problems starting, I suspect a hardware failure at this point, maybe the SSD or HARD disk.

  Contact your regional Acer support service.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Acer Aspire on reformatting receives an error "not customize Windows re to recovery utility.

  I tried to reformat my Acer Aspire 5560. It goes through the system, the 1, 2, 3 and 4 recovery disk disk, then click Disk language toward the end, he receives a 'Fail to Customize Windows re for error recovery utility".

  I've seen this error when people tried to create a partition for recovery for the future, but in this case I need to return my computer working again!

  In the meantime, he will not restart and says BOOTMGR is missing Press Ctrl + Alt + Delete to restart and goes right in a loop. Help, please...

  Download Ubunto and burn the iso, boot from the cd and choose try Ubuntu, install, since a live session start the Editor of Gparted Partition system-> Administration, click on partition and choose delete, choose new and create the new partition, format partition.

• my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. Today the taskbar has disappeared from the bottom of the computer, I get message error system-2018375670

  my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. up-to-date as the taskbar has disappeared from the bottom of the computer, I get the message error 2018375670 system, which can do it, I can't access anything on the computer

  Hello

  Here is the Vista Forums, you send messages to.

  Vista doesn't do not part of the update free Windows 10, so 10 would not settle.

  The free update is for 7, 8/8.1 and 10.

  See you soon.

• My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

  My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

  I'm almost illiterate with these things.

  Any help

  Thank you

  Original title: error message

  Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

  To test your installation

  You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.

• "Windows cannot check for updates" error Code 80080005.

  I have Vista Home Premium, Dell Dimension XPS 410.

  When Windows tries to automatically check the update of Windows, I get a message saying, ' Windows cannot check for updates.

  Error code 80080005.

  Can any ideas on how I fix? I've had this problem for over 3 months now and cannot find information on Microsoft Support Website.

  Thank you

  JA

  Hello drjoe_anzaldua,

  Thanks for posting on the Microsoft Answers forum.

  Usually the "Windows is unable to Check For Updates" error message produced always of the blocker window update connection attempt.

  1. first of all, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  2. check if Windows Firewall is blocking the update of Windows.

  Please see the following article for connection errors:

  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  After following the steps of troubleshooting in the article, if you still get an error message, thanks for posting again so that we can help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.