P10 - 304 - no display after wake up

Similar Questions

• P10-304: matter of procedure strange recovery

  I'm a technician + certified PC a customer brought the laptop (Satellite P10-304) to me after she had taken this back to the place she bought. They said she needed a new hard drive. I inserted the DVD of recovery for the A60 (is the only recovery DVD she brought with her) and image the laptop when he went at the start would go to loading windows, he would crawl to take 30 minutes to start. Something is happening with the hard disk transfer rate.

  I think it's the hard drive controller OR there is some chipset driver not get loaded from the recovery DVD as it's the fake recovery DVDs. I used Windows XP Home OEM CD as well, but the same problem occurred.
  Any suggestions would be helpful.

  Hello

  In my opinion, you are trying to recover the device with a bad recovery CD.
  As you said you have a recovery for a Toshiba A60 laptop CD and the unit is a Satellite P10-304. These are two different workbooks and to retrieve the device you need exactly the right recovery CD.

  I suggest contacting the after-sales Service of Toshiba partner. Here, you can order the medium right of recovery.

  Good bye

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.

• Satellite P10-304 - need driver for "multimedia audio controller".

  Hello

  I had to reinstall the operating system on laptop Satellite P10-304 PSP10E ORCJM-EN, but I do not have the drivers for the hardware. I can't find the drivers for the "multimedia audio controller" on the Toshiba site:
  NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 526 & selShortMod = 356

  All suggestions will be welcome.

  Thank you very much
  Mark

  Hello Mark

  I guess what you're missing is driver sound.
  Please also check document Setup Instructions and install all the stuff after this installation order. It is very important.

• Satellite P10-304: bad sectors on the disk - how to fix?

  My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this?

  My model is a P10-304.

  In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, does anyone know how to bypass or disable round trip

  Hello

  I found these tips how to disable the Norto Go Back tool.
  You can uninstall it from your computer, disable GoBack to your laptop press 'space' GoBack screen button and select the option "disable" GoBack.

  Follow these steps:
  1. reboot your computer.
  2. when the Norton GoBack splash screen appears, press the SPACEBAR.
  3. in the Norton GoBack boot menu, click on disable.
  A message informs you that disable Norton GoBack erases history and you will not be able to run the hard drive or hard disk restore advanced restore until Norton GoBack is turned back on.
  4. click on Yes.
  5. click on continue.
  Your computer restarts automatically, and Norton GoBack is off
  After restarting the laptop, I recommend once again using the following key: CTRL + ALT + G.
  Immediately press on and hold the keys Ctrl + Alt + G after restarting the laptop you. A message you giving the possibility to force the removal of GoBack master boot record. Press F to force the removal of GoBack master boot record.

  If failure of keys Ctrl + Alt + G in the first time then try this again for three or four times until you get the prompt to remove the master boot record of GoBack.
  Finally, restart the computer.

  To fix bad sectors on the HARD drive, you could boot from the XP CD to use the console of "repair".
  And then use the CHKDSK /p command to repair the bad sectors.

  Good luck

• USB 160GB HDD - Satellite P10-304 doesn't see 127.9 GB

  Can someone help please, I bought a new 160 GB Seagate Momentus HDD.

  I put in a USB enclosure and connected, but when I go to Paragon Disk Copy he can see a disc unformatted 127.9 GB.

  If I right click on 'My Computer' and use 'Manage', it says I have a unknown 128 GB drive connected.

  I updated my BIOS to the latest available from Toshiba (2, 00 - WIN) dated 27/04/06 (on the Toshiba site "last updated on 27/04/06"). However, in the information system, he says: "BIOS Version/Date TOSHIBA V2.00, 28/12/2004", correct version but date looks old? on the site Web of Toshiba the last BIOS (V1.60) is listed as: last modification 15/12/05?

  Does anyone know if the Bios allows more than 128 GB of disks?

  If the answer is no, what are my options? If I go ahead and copy the disk it will work as usual, but as a 128 MB drive? Later if a new Bios is published, allowing disks of large capacity will be the full space available or should I take a disc image, reformat the hard disk and then copy the image (only have a record of this great would mean that I have to use another PC to achieve this).

  Its a real pain, ideas or thoughts?

  Many thanks Tony

  Laptop: P10-304 running XP Home.

  Hello

  I m not 100% sure if it has something to do with the BIOS.
  I think that it s simply a matter of calculation.
  HDD dealers calculate with 1000 and they must calculate with 1024. But the difference is still to oversized

  Please also check the size of the HARD drive in the other sense. After the fixing of the external HARD drive, you could right click on the HARD drive and check the properties.

  BIOS:
  Y, please read the more info section. You'll find info that the 1.60 BIOS update is only for the satellite P10 series models that contain "PSP13E" or "PSP16E" in the model number and version 2.0 of the BIOS update is only for the satellite P10 series models that contain "PSP10E" in the model number.

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• Toshiba P10-304 crashing, hard drive problems?

  Hi all

  I have a Toshiba P10-304 and its going a bit mental fact lately.

  I am running XP Pro and basically it started crashing frequently and then later he came up with the error: media test failure, check, etc.. So, I thought that the hard drive was dead. Since then, I bought a new hard drive (seagate momentus) and formatted correctly and worked fine for 2 days. But now the 3rd day, he began to display similar symptoms like my old toshiba oem drive. It tends to crash frequently, the continuous drive to make a horrible noise even with the system delayed broke down. It also for the first time displayed the same messages error 'media test failure...' but then started restarted fine, but only to the failure to new about 5 minutes later.

  Ive just finished College and do a bit of web design and its really annoying me so I would appreciate any help.

  See you soon,.
  Eliane

  Hello

  It may be that the IDE controller is faulty, this explains why the new HARD drive also have problems!

  The only thing you can do is contact a partner of Serivce for a medical examination.

  Good bye

• Satellite P10-304 turns on but the screen is off.

  Hi there... Please someone help me. I m having this problem since last week with my P10-304... it was working fine... but now last week I turned it off and turned the morning we return on the use of battery that he kept on going stand-by mode... and when I turned it off again and plugged the AC adapter is on, but screen didn't seem to turn on...

  I thought that the screen has gone... but last night I turned it on. He walks and went to hibernation! Don t know why. And now the same problem again... I turn power turned blue and the screen is blank (as it s off) I put t know what to do. I tried using the recovery disk. But nothing comes on the screen, as I said, the screen is blank as is it turned off s.

  Please help me... !!!

  Hello

  Well, this is a strange question. It's not easy to say what can be the problem.
  But first you must remove the battery and the AC adapter for 1, 2 hours.
  After this procedure, use the power supply for the test to work.
  If the problem is still topical, I guess that it s a hardware malfunction.
  In this case, the best way is to contact the service partner.

  Best regards

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• Satellite P10-304 power until now

  Hello

  Got the machine Satellite P10-304, which won't turn on after the 2nd attempt. What happened: -.

  Machine power of cold - booted Windows XP ok start. After 5-10 minutes, the machine screen is dimmed (resembles backlight is gone) and couldn't turn off the machine by pressing button, so had to remove the battery to kill machine power.

  Now machine won't turn on (same battery fully charged), when I pressed the power button, I get a light flashed orange once inside the circle of blue light around power button / stop.
  Leave the machine shut down for about an hour and machine started in the BIOS screen, then after 3 minutes the screen is dimmed. Machine unbootable. Checked AC adapter and get 19.3Volts and 6.1Amp for power unit ok.

  Looks like the motherboard plays up and needs to be replaced? Dose - that someone has encountered this problem before?

  Thank you very much

  Hello

  > Sounds like the motherboard plays up and needs to be replaced?
  Yes, it seems so :(

  Maybe it s not the motherboard, but another part of the material. But to be honest, you should go to an authorized service provider. Technicians can check the laptop to determine what the problem is exactly.
  And here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• U2413, crazy to display after the awakening of the mode standby

  I just installed and calibrated my monitor U2413.  It seems that every time I wake up the display after my computer went into mode 'sleep', I get a distorted picture.

  Most of the time if I turn the screen then turn on the monitor resets. I use a dual monitor set up and the secondary display is fine.

  How do you know if there is a problem with my monitor or the video card in my computer?

  Thank you

  Crystal

  You can contact Customer Service and ask them to arrange a changemonitor. You keep your current monitors until arrives the replacement. Test the replacement, if it has the same problem, return the replacement to Dell. If it doesn't have the problem, return the original to Dell.

• Recovery disk does not work on Satellite Pro P10-304

  A few days ago my Satellite P10-304 is not start, so I used recovery CD and got the machine works like new.
  Yesterday it wouldn't boot.
  Some thing on an ethernet cable unplugged error message, so I tried recovery CD because there is no data to lose.
  It won't work, to come up with an error message "GDISK (E) no such fixed disk - 1" then "error number 11030, invalid destination drive.

  Can anyone help me to get it booted/recovered please?
  I'm not fussed on something special for this old laptop, just a second computer for the kids to do their homework on.

  Hmm. sounds like a HARD drive failure
  Have you checked if the HARD drive has been recognized in the BIOS?

  > Something on an Ethernet cable unplugged error message.
  I guess you get an error PXE - E61 starting at startup.
  This message appears if the laptop tries to boot from LAN.

  This could happen if there are no other sources of boot as HARD drive, etc.

• Satellite P10-304 - replacement of the drop-down list

  Will SR-2512 in a P10-304 work.

  Hello

  Call the partner in your country. They can give you more information about the compatibility of the discs.