P10-554 HARD drive replacement

Hello

I would like to change/replace the HDD of my P10-554. How it works?

Thank you very much!

Greetings
Harry

Hello Harry

Please see this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=12397

If there are more things you want to know please use option of advanced search on this forum.

Bye and good luck!

Tags: Toshiba

Similar Questions

  • a new backup on external hard drive replaces a precedent already on the disc

    backup to an external hard drive replaces a previous backup already on the disc

    Depends on what software is used to make it.

  • hard drive replaced a moment my performed web cam will not work

    I have a dell m5030 I lost my o/s I had the hard drive replaced a moment made my web cam does not work WHY?

    willmason1953,

    When you have installed the operating system, have you installed the utility of the portable system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

    Rick

  • HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive replacement

    Hello

    I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC, and I had problems with hard disk of the guarantee period. for example I buy in 2010 and had a hard drive replaced in 2011 and 2012. Next time, he failed in 2013 (almost 11 months apart on average).

    The last time it failed, the warranty has expired so I thought to give it a try as employment through fixing/amortization of bad sector seagate software, Toshiba... that came out of Smart Drive Error.

    I use the HARD drive for some time now, but want to be ready for the next round and I don't know that he's going to be gone for good next time.

    Current HARD disk is 640 GB, 7200 RPM hard drive (replaced in 2012). HP 621046-001 manufacturer.

    When replacing, can I use ANY hard drive 640 GB? Can I use a hard drive that is higher than 640 GB? Different RPM?

    Any suggestions on hard drive?

    The recovery discs I had received with the replacement drive did not work properly. I had to use the first game I had created just after I bought the laptop.

    Thank you.

    -Pratik Patel

    I think that 160GB 2.5 "SATA III SSD is good for the system.

    Thank you

    visruth

  • HP-G053NL: HP-G053NL Ram and hard drive replacement

    Hello

    There's a guide for hard drive replacement/upgrade and RAM laptop HP-G053NL?

    Thank you.

    Hello

    This is the manual of the device you're using.

    http://h10032.www1.HP.com/CTG/manual/c04162986.PDF

    For more information, visit the link below

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=7450832

  • I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

    I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

    Option 1:

    If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

    Option 2:

    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

    Option 3:

    If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  • I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

    I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

    Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

    Thank you

    Bev

  • My Mac has crashed. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Suite?

    I bought my Macbook Pro 17 (it's a Mid-2009, running Cougar 10.8.4) used on eBay, and it came with Adobe Master Suite CS5. I pursued a degree in graphic design, and the computer had everything that I needed to start. Now that I'm out of College, I rely heavily on InDesign and Photoshop to get the job done. However, after five years of loyal service without problem, my Mac has crashed and I have never used time Machine. I might have to reinstall Mountain Lion or replace the hard drive. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Collection of applications? I can save them somehow?

    Any reply and help would be greatly appreciated.

    Thank you for your time.

    Caleb P.

    When you have a non-functional computer and cannot turn it off, click on the link below

    Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

    Lost information - response #1 in https://forums.adobe.com/thread/2008767

    -page includes links to the programs to find a serial number installed on Mac or Windows

  • Re: Satellite P10 304 - hard drive compatibility

    Hello

    My original hard drive is dead and I find it very difficult to get information on the internal hard disks will be compatible replacements, especially that Toshiba offers no sales through this site.

    The old disk seems to be IDE (or EIDE). An ATA100 drive would be compatible? PATA?

    Thanks for any information.

    This forum offers numerous useful threads on the upgrade of the disk on the Satellite P10.

    But here's my suggestion;
    The laptop uses a 60 GB 4200 RPM IDE (ATA-5) (Ultra-ATA/66)
    The controller uses ATA - 5, and in my opinion for example disk HARD ATA - 6 (Ultra-ATA/100) will work too, but perhaps not with 100% performance.

    Good bye

  • iMac mid-2010 for one SSD HARD drive replacement

    Hello

    After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

    The iMac in question is a model 27 "2010.

    Here's what I have on order:

    I also ordered suction cups and relevant screwdrivers.

    I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

    Cheers in advance

    Ian

    Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

    The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

    Good luck

    Sam

  • Portege 4000 hard drive Replacement - what HARD drive is compatible?

    Is it possible to find a replacement for my Portege 4000 HARD drive, because the original becomes very capricious?

    Hi mate

    I think that the Portege 4000 is an elder and in my opinion this laptop supports a 2.5 HARD disk.
    I m not 100% sure, so I recommend you to install a hardware diagnostic tool like Everest Home Edition which would provide all the information on the HARD drive is internal.
    That would help you get a new, compatible HARD drive.

    Welcome them

  • Portege M200 - HARD drive replacement

    Hello world

    I bought a Portege M200 opportunity and replaced the 40 GB with a 160 GB hard drive.

    After about a week and a half of research, I managed to get almost everything and running upward.

    Hello

    You have a question about your Portege?

  • Tecra S3 - 153 Maximum capacity of HARD drive replacement

    I want to install a new HARD drive with a higher capacity, but I can't find any information on the maximum capacity of replacement of hard drives.

    Does anyone know hwo to find that info or what would be the maximum capacity for TECRA S3-153 PTS30E-0TD03S?

    Hello

    Tecra S3-153 supports the SATA controller.
    As far as I know that the SATA controller is not limited, so, theoretically, you should be able to use HARD drive sizes 2.5 SATA; 250 GB and more

  • HP Pavilion p6580t CTO: hard drive replacement options

    Hello

    I need to replace the hard drive (ST31000528AS) on my HP Pavilion p6580t CTO.  I'm trying to find which drives are compatible.  ST1000DM003 (promoted as a newer version of the ST31000528AS) work?  What of the SSD Kingston SSDNow v + UV400 (it is smaller, but I have not so much storage)?

    f your original hard driveis still functional, I would discuss with the mnaufacturer. There are programs to reduce the partition to make your request.

  • Windows problem for hard drive replacement

    I am trying to replace a hard drive in a HP d530 for a science teacher as the XP is a failure. He needs the XP until I finished preparing the Windows 7 and it has data on the XP and I put Windows 7 on the new hard drive and it has 80 GB. The old hard drive Windows XP and it is a 40 GB. I had two hard drives hooked when installing Windows 7. Windows 7, the name is the C drive and disk XP the D. I tried to start the hard drive of 7 single and it gives me an error of invalid system disk. Press a key to reboot. When I have two connected hard drives, windows 7 starts very well. A computer teacher wants to clone Windows 7 for another professor of science. He said, it won't help him with two hard drives connected. How can I get on the 80 GB stand-alone installation without having to reinstall Windows 7 Windows 7. I want to disconnect the hard drive from XP and just use the hard disk 7. I have the 7 and XP on separate hard drives. They are the two IDE hard drives. I need to get the new hard drive to boot by its self and windows 7 as a stand-alone installation.

    That's good news.

    I'm so glad you took in charge.

Maybe you are looking for

  • Series a Apple Watch does not always display

    I was the first of the Apple Watch in October 2015.  Sport model. Just in the last month when I flip my wrist the display lights not sometimes making me turn my wrist a second or rarely a third time so that it lights up. Is this a known problem or a

  • Satellite Pro 4360 - SSD boot via Cardbus (PCMCIA) possible?

    Hi all I have an old 4360 SP.Anyone know if an upgrade of BIOS 2.70 will allow me to boot from SSD inserted into the Cardbus pc card slot?Just knowing the Bios will only recognize DVDs, HARD drive and FLOPPY drive as boot devices. Second question:I h

  • A string of sharing by a queue of execution to run on different computers

    Hello I try to share a string of one execution to another execution. The problem is that executions are on different machines on the network Stuff running on the same machine works. On another machine I got the error-17500 dcomcnfg.exe is configured

  • The locations of rows in a table 2D graphic how?

    I'm working on a project in which I generated a table 2D-values and would like to graph each line as its own plot. Anyone has a suggestion for the easiest way to do this? (All parcels should be on the same graph)

  • DVD-ROM drive won't read DVD

    I have this CD/DVD which will play normal CD but will not play any DVD (DVD + R, DVD-R). I noticed that the DVD would not work when I was a BONE RESETTLEMENT. I put in my Windows XP restore disc, and installed successfully. Then I put in my drivers d