P1006 printer does not work on Windows 8

Similar Questions

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Printer does not work with Windows Vista

  My HP Deskjet2540 all in one printer will print with windows vista. Ive tried printing from excel, works and all I get is a blank sheet. Sometimes I get some very weak marks. I have a lot of ink, I uninstalled and reinstalled only to get the same result. However, I can print something on the internet and I can print a test page. I get no error message.

  Hi cat22,

  Thank you for visiting the Forums from the HP Support! I see when you print from Excel to your HP Deskjet 2540 printing comes empty or with very weak lines. You have a lot of ink, and you have no problem printing from other programs. You tried to uninstall and reinstall the software without success.

  I would like to first you attempt to change the quality setting, you can have currently set to normal, we will try to print in optimized mode and see if that helps:

  1. go to your Start Menu

  2. go to your devices and printers

  3. right click on your DJ 2540 and navigate to Printing Preferences

  4. click on the paper/quality tab

  5. Select the best mode

  6. click on apply

  Now try printing from Excel, you still get blank pages? Please let me know the results if you are still running into errors let me the following information:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected USB printer or wireless?

  3. are there any exceptional computer upgrades that have not been installed?

  I hope hear from you soon.

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• Evolis Badgy card printer does not work with Windows 8

  Original title: Evolis Badgy Card Printer

  I have an old Badgy printer of a year that will not work with the new Windows 8.  I know it's because of USB 3.0.  It still works on the old computer with USB 2.0.  How do I make this camera compatible with Windows 8?

  I have an old Badgy printer of a year that will not work with the new Windows 8.  I know it's because of USB 3.0.  It still works on the old computer with USB 2.0.  How do I make this camera compatible with Windows 8?

  Hello

  Is this a new computer you use with Windows 8?

  Most new computers that support USB 3.0 will also have at least 1 or 2 USB 2.0 Ports, not all USB devices that support the new USB 3.0 standard.

  You can also contact the manufacturer of the printer to help.

  Concerning

• The printer does not work with windows 7

  Just bought a Samsung R480 today and discovered that my existing printer is not compatible with it. The Setup disk only works with Windows XP and Vista. Samsung R480 running Windows 7 at the moment.  I was also considering changing my desktop computer for Windows 7 as well.

  So my question is, is it possible to request an another HP installation cd that is compatible with Windows 7? Or I have to buy a new printer that is compatible with Windows 7?

  Thank you!

  The link below should show the selection of OS for the drivers of J4680c. just click on what version of Windows 7 you have (32-bit or 64-bit), then download it the driver full of features.

  Pilot J4680C

• HP C4280 WITH PAVILION: HP C4280 PRINTER DOES NOT WORK WITH WINDOWS 10 - NEED ADVICE!

  I GET THE INCOMPATIBILITY MESSAGE WHEN YOU TRY TO PRINT AFTER INSTALLING WIN 10.   PTR WORKED WELL WITH WIN 7.

  Hello

  Although this post is in the topic box wrong (should be under the headings of the printer), I'll see if I can help.

  Go to the Panel of control---> programs and features and uninstall the C4280 existing software.  Now install the software for the C4280 Windows 8.1.

  Thanks for posting on the forum.

• Why my canon i960 printer does not work on windows 7

  Iseem have tried all things. IT keeps telling me to go awry.

  Go to here...

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&fcategoryid=117&ModelId=9388#DownloadDetailAct

  Download and install Windows 7 drivers for your printer...
  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• My Dell Photo AIO 926 printer does not work with windows 8

  new Dell said there is no driver for my Dell Photo 926 printer is there a way to make it work?

  Hello

  You can try to disable the print spooler before uninstalling the software.

  After restarting your computer, turn it off before you reinstall the software...

  This adds the steps mentioned previously...

• HP laserjet pro p1102w: hp laserjet pro p1102w does not work on windows 10 - printer needs attention

  I installed Windows 10 on my HP PavilionX2 about two weeks ago and after a lot of false starts but I finally going.  I set up my printer HP Laserjet Pro 1102w associated with the installation of HP application and got new drivers, etc.  The installation was successful.  When I tried to print.  I received the message that my printer requires attention. I use generic cartridges, which seems to be contributing to the problem.  However, I discovered that the printer would be finally print everything I sent him a few hours later.  So, every time I want to print I just ignore the message about needing to care, but I have to wait several hours before Windows 10 finally released the document for printing. I have no problems whether in point 8.1 of Windows.  It is new with Windows 10.

  My printer works on three of my Windows 7 computers and on three of my computers windows 8.1 and on my iPad, so there is no truth to the message that the printer requires attention.  The printer works fine, but it does not work in Windows 10.  Microsoft Community is no help.  I reinstalled the drivers at least three times using the HP Setup utility. It was worthless.

  Is it possible to fix this?

  Hi @technickel5,

  I see that you are having problems printing just the Windows 10 computer, the print job prints a few hours later after sending it. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would cycle power to the router, restart the computer and the printer to see if it will help.

  It can be assigned to the printer port. Devices and printers, right click on the printer and left click on printer properties, select the Ports tab and see if the printer is checked on TCP/IP and no WSD. Let me know how it is listed.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  Here is a list that the PSDR check on the computer.

  

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know. Thank you.

• printer does not work in the windows machine 8

  my printer does not work in this new machine of windows 8. tried everything to fix the problem. It won't send email documents to the printer either. just doesn't get it. Ive had kodak install drivers, and just, it will not work on this computer. It was fine on windows vista. the printer is set by default on this computer, then why it wont work on this one. not happy with windows 8 at all. wish I never bought it

  Hello

  As Kodak OEM is responsible for the good operation of the printer and their
  drivers provided. Check their documentation online, with the support of Kodak, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Kodak - printers
  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvc2VsZWN0ZWQvdHJ1ZS9jaGFuZ2UvdHJ1ZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu/change_country/true

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Smart Web printing does not work in IE9

  Smart Web printing does not work in IE9...

  I tried option, uninstall web printing smart hp and reinstalled. now it works... also if you use a pop up blocker, then you have to give permission to allow access to this site. It will come up as a small secondary window and print as did former windows messages.

• New Modem - like get a new modem my printer does not work

  Since obtaining a new modem, my printer does not work. The printer is a HP 4500 wireless all-in-one. What should I do?

  Hi reillydebra,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?
  3. what operating system do you use?

  If you use Windows 7, try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Additional information:
  Check if you need to open ports in the modem.
  http://h20563.www2.HP.com/p/_wireless/troubleshooting.html
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=59455&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3919449

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• HP Deskjet 2512 Director does not work on Windows 7? Is there a solution?

  HP Deskjet 2512 Director does not work on Windows 7? Is there a solution? Everything that happens is two pages of text, open, but no Director. I downloaded and installed the latest version of the software full version DJ2510_1313. No help for it?

  Hi DJ2512,

  I understand that you have a Deskjet 2512 which is not able to open the Printer Wizard, it opens to text pages. I'm sorry to hear that, but I'll certainly do my best to help you!

  From what you described, it seems that your printer wizard opens to a page of the Notepad. I suggest you follow this document Opens Assistant HP printer with an error in Script or in Notepad to get the problem resolved.

  Hope this helps, have a nice day!