P310 and SCCM 2012 R2 questions

Similar Questions

• Revolve 810 and SCCM 2012

  I'm trying to deploy an operating system via SCCM 2012 a 810 turn and I'm having no luck with the driver for the CARD. I loaded the driver downloaded in SCCM and it is important without error but don't deploy. I put the driver on a usb key and it will load fine.

  Look in the file INF of the PCI VEN number is not there for the hardware in the Device Manager, is the right driver?

  Any suggestions on getting this driver to work with SCCM?

  This driver from Intel has solved the problem for me:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3299 & DwnldID = 18713 & Keyword = 82579LM + Driver & lang = eng

• EliteBook 8570p: BCU and SCCM 2012 WinPE10 error 0x0000000A and task sequence 0x0000000B

  I am trying to run an OSD task sequence in SCCM 2012 to set the BIOS Setup, secure TPM activation and switching to native mode UEFI in preperation for BitLocker, then BIOS password setting all of in WinPE. The command below works fine when connected to the laptop in full Windows 10 cmd prompt, but for some reason I get and error when trying to run task sequence command.

  Using the version of the NBU: 4.0.13.1

  Version of WinPE 10 x 64: 10.0.10240.16384

  "' RunBCU.cmd /setconfig:"Config\8570pconfig.repset' /cspwdfile:"Config\oldpassword.bin ' /nspwdfile:"Config\newpassword.bin '.

  Where are the log files of the utility?

  What does the error 0x0000000A and 0x0000000B?

  What Miss me?

  Any help would be much appreciated. Thank you.

  Please, look at the white paper following developed to help understand how to manage the TPM and also not recommended for SCCM

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/whitepapers/building, %20Deploying,%20and%20Updating%20an%20Image%20on%20HP%20Commercial%20PCs.pdf

  other whitepapers are available from www.hp.com/go/clientmanagement

  BTW, it seems that you must set the pwd BIOS FRONT to manage the TPM

• SCCM 2012 R2 and Adobe create clouds

  I built the package with the new manager of adobe that said links he puts acrobat and all in the record of generation.  now, I want to deploy the package with SCCM 2012 R2.  but was it the .bat file that I need to create to make it happen.  I want to install unattendend quiet and not restart for the machines.

  1. adobe Reader DC. I have run the adobe customization tool and I have a mst file.  so, what's my command for this? I also want the command to remove the old version of the Adobe reader installed.

  Install the player with an STD

  msiexec /i TRANSFORMS = "filename.mst"

  To uninstall

  msiexec /x "c:\filename.msi" / q

  s http://www.Adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Cmdline.html#silent-uninstall

  Obviously change "filename" to the actual name of your MSI file or STDS.

  2. cloud to create adobe I used adobe Packager to build.  I want to be sure and install everything that I took the package includes acrobat.  What is the command for this?

  Syntax

  Setup [-silent] [-ADOBEINSTALLDIR =] [-INSTALLLANGUAGE =]

  Syntax example:

  Setup.exe - silent - ADOBEINSTALLDIR = "C:\InstallDir" - INSTALLLANGUAGE = fr_CA

  Location of setup.exe:

  [Package] \Build

  See also https://helpx.adobe.com/creative-cloud/packager/deploying-packages.html

  https://helpx.Adobe.com/creative-cloud/Packager/deploying-packages-SCCM.html

• Problem with WSUS after upgrade of SQL and SCCM

  A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

  The WSUS administration console failed to connect to the WSUS server database.

  Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

  System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

  WARNING: The join order has been applied because a local join hint is used.
  Source .Net SqlClient data provider
  Stack trace:

  to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

  at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

  I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

  I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

  Hello

  This community is for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  SQL Server TechNet forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Join the SCCM R2 2012 primary site in front of the pile of pre-existing R2 SCCM 2012

  Hello

  I have a client who intends to install in his office in El El Salvador a SCCM 2012 R2 server as the main site.

  This new server want and then attach to the hierarchy who have already installed in Spain, who have a SCCM 2012 R2 server with the role IF.

  The areas between the two offices are different forests, working for allowing communication between the two offices using trust relationships in Active Directory.

  The question I have is, if we can install SCCM primary site and possibly join the existing CAS server?

  Thanks to advice.

  Best regards

  Manual

  Hello

  SCCM is not supported in these forums. I suggest that you try to repost your question in the relevant forum on Microsoft TechNet:

  https://social.technet.Microsoft.com/forums/en-us/home

  Thank you.

• PXE no longer works after upgrade SCCM 2012 R2 SP1 CU2 to SCCM 2012 R2 Sp1 CU3

  We have recently improved SCCM 2012 R SP1 CU2 Cu3 to SCCM and PXE has stopped working.

  We have about 55 DP servers in various locations, and all have active PXE. We have this problem in all locations.

  Until I did follow the troubleshooting steps below

  (1) uninstall WAIK 10,

  (2) removed from sccm boot images

  (3) installed WAIK 10

  Boot images 4) imported from sccm

  Boot images redistributed, but always PXE boot fails with the message "not received no boot PXE-53 file name."

  SMS PXE newspapers doesn't show any errors. Everyone has faced this problem. ?

  Hello Brice,.

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?Forum=configmanagerosd

  Thank you

• Ways to populate a list of distribution of a collection of SCCM 2012 full of PC?

  G ' Day to all,

  So in the establishment with whom I work, we have Active Directory 2008 R2, groups that populate the SCCM 2012 collections and send the software, patching, etc for the machines.

  One of the collections is responsible for the shipment of windows, Adobe & office patch a few days to come as a group of tests.

  The process for this group, we will email all primary users for each PC in the collection in SCCM and let them know that they will be receiving patches at the beginning.

  We have the Mail field in SCCM for filled users, so all we need to do is recover the primary user for each PC in the collection and populate a list of email of this.

  Other information in the case, it is relevant:

  We are on Exchange 2012.

  Some users have nothing in the mail field in SCCM (eg. admin accounts)

  Can anyone suggest a way to do this? :)

  G ' Day downunder

  This question is way off-topic in these consumers, end-users forums. You will have a much better chance of finding someone who knows what you tell more about TechNet, where hang out of the it professional and system administrators. Try here to get started: http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager

• Satellite Z930-14F - cannot install Win 8.1 SCCM 2012 R2 environment

  Hi all

  Series laptops Z Sattelite impossible to install OS (win 8.1) of our SCCM 2012 R2 environment.

  No installation or pxe boot interrupted error is shown.
  The environment is used in order to correctly install the operating system (win 8.1) on various other seller computers (dell) and the VMS (hyper-v and vmware).

  I tried boot UEFI and CMS options and tried to turn off the secure boot. Please advice.

  Also, I read on the 'package to install SCCM for Toshiba. This will help in my situation or it's just the driver for SCCM packages?

  Best regards, Evgeny.

  I assume you mean on this package from Toshiba:
  http://www.Toshiba.EU/services/on-demand/business-computing/sdp120gs-v/

  I put t have much experience using this drive package SCCM, but it is certainly compatible with professional Toshiba laptops. The Satellite / Portege Z930 belong to the range of the company, and I think that the package must be compatible.
  This package seems to be for all administrators that manage devices on the network of business with SCCM 2012 R2. Toshiba offers with the new SCCM Toshiba package a solution to integrate other laptop to an existing IT infrastructure quickly and smoothly and all the Driver from Toshiba and application packages and a demonstration task sequence are integrated.

  However, it seems that you could get more details about this package directly from Toshiba [email protected]

  By the way: The Win 8.1 installation requires the UEFI mode (in which case the UEFI BIOS is available). But the start of another external source requires the secure boot disabled option.
  Then maybe you should use the UEFI mode but must clear the safe boot option to boot from LAN.

• How to capture language settings by using the Sccm 2012 task sequence.

  Help, please

  I want to capture language settings by using the Sccm 2012 task sequence.

  for example, if I push the task sequence on a computer through the software Center... He must capture the machine language first, and then format the machine and then restore back language settings... I'm not sure if USMT capture language using the task sequence settings... could you please help and let me know if any solution for this

  Thanks in advance

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• SCCM 2012 all software updates - download 0%

  We have a SCCM 2012 R2 infrastructure. Software updates were working a few weeks ago. Now, all updates have "TΘlΘcharge (0% complète)" in the Software Center. Other software that is not updated have "TΘlΘcharge (0% Complete)" status as well.

  The content is on the Distribution point. Limit is defined for the client computer. Limit is a limit group. Boundary group is assigned to a Distribution Point. Client computers have this DataTransferService.log:

  Sending request for DAV error. The 500 status code HTTP 'Internal Server Error' DataTransferService 21/12/2015 13:39:27 3276 (0x0CCC)
  GetDirectoryList_HTTP ("https://SERVERNAME.COMPANY.COM:443 / NOCERT_SMS_DP_SMSPKG$ / ebcb39f4-0aaa-4ce6-8012-90206447555a'") failed with code 0x87d0027e. DataTransferService 2015/12/21 13:39:27 3276 (0x0CCC)
  Non-recoverable error retrieving manifest (0x87d0027e). DataTransferService 2015/12/21 13:39:27 3276 (0x0CCC).

  I checked IIS, including permissions to the Point of Distribution and ASP .NET version which is 4.6, according to me.

  Help, please. We're dead in the water with the updated software and other telesoftware right now. Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How impact SCOM and SCCM MSDN licenses?

  Hello

  I was wondering if anyone can point me to a white paper or answer the following scenario:

  I have two data centers, with production servers in DC1 and non-produits and DR in DC2.  It is primarily a virtual landscape, if all purchased licenses is based on the host.

  I am evaluating the use of MSDN to treat my UN-produced landscape and I have a question around SCCM and SCOM.  I currently have a configuration with all servers enviornment (prod and UN-made) managed from one set of each service (SCCM and SCOM).

  If I were to apply MSDN license to my UN-produced landscape, would I need to get up a separate SCOM and SCCM to manage my no prod, or can I use my existing servers of SCOM and SCCM and continue to manage the two?

  If I can't use my current instance of SCOM and SCCM, and I have to raise a separate defined to manage the UN-produced landscape.  I can have them managed by the same management as the current management systems interface?  Or do need to be completely separated?

  From a cost perspective, I see these scenarios, which one is right? :

  Assume the cost of Windows Server Datacenter CIS = $15,000 per host server and CIS = $5,000 per host server.

  1 costs avoided $ 15,000 per WIndows Server Datacenter CIS - using the model where the current prod SCOM and SCCM systems can continue to manage the landscape non-produits non-prod.

  2 non-produits costs avoided $ 15,000 (Windows server Datacenter CIS) - $5000 (CIS licenses only) by Windows Server - using this model, you continue to use the SCCM and SCOM prod systems

  3 non-produits costs avoided $ 15,000 - force me to stand up a separate instance of SCOM and SCCM to manage the non-prod, but can still use the centralized management interface to manage both environments

  4 non-produits costs avoided $ 15,000 - force me to stand up an instance of SCOM and SCCM, managed separately for production management systems.

  Thank you in advance.

  Kind regards

  HM

  Hi HM,.

  It's a good question - but you might have posted in the wrong forums. This community is designed for the consumer/customer related issues.

  If you post your question in the TechNet Forums, they will be able to help you with your issue pronto. This forum is oriented to questions like yours, and you may find the answer without asking first.

  See you soon!

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• SCCM 2012 detection method

  Hello

  Does anyone know if there is a guide of SCCM 2012 deployment for Adobe CC products?

  I checked this CC guide help | Package from Adobe with SCCM deployment , but it is the old method of package, prefer the SCCM 2012 applications.

  If no guide for SCCM 2012, is it perhaps a list of methods of detection for each adobe application.  (I tried the method of detection of MSI, but it seems that adobe are those wrappers, so do not work.  The only way that I've found so far is to install the application, and search for the appropriate reg key HKLM... Uninstall and use it.  It's a little hassle to go through and install each of them just to get the key "reg" well.  I'll have to do this for all new deployments (cloud creative), I'll be able to use the current system for Creative Suite, so they are not so bad.

  For anyone referring to it later, I get a message "does not meet the minimum requirements" if I use the msi as a method of detection.

  I tested with Photoshop (by installing and accessing the "reg" key) and it solves the problem of "minimum requirements".

  An example of the key "reg" is this for Adobe Web and Design Premium CS6

  HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\ {402F6F2E-5683-491C-9-77 d-0CA599A07CAF}

  
  

  Hello

  I apologize for the inconvenience. We provide a standard msi installation program of deployment via SCCM. Creative cloud Packager creates a native installer to use via SCCM. The proceedings will remain same as other .msi that you deploy through SCCM.

  You can follow the installation using GUID.or software ID Tag instances. Here is the article itself.

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/Swid-CC-FAQ.PDF

  Thank you
  Ashish

• PCOIP disconnects when you connect with SCCM 2012

  We have two servers view 5.2.0 our handling connections. The machines have 5.2.0 Agent and the client is 5.3.0. We just migrate all our users on these new servers and decided to use pcoip as it is by default, but now, when we use SCCM 2012 to support our users as soon as we can connect with the remote, it disconnects the user. When the user connects with RDP we don't have any problems. Is this a limitation with PCOIP?

  Teradici come back to me. Unfortunately currently the only way to shadow users desktop is to use vSphere. With a variety of physical and virtual machines, it is not possible to use two different solutions.

  http://TechSupport.Teradici.com/ICS/support/kbAnswer.asp?deptID=15164&task=knowledge&questionID=1239

  See above for how to do if you wish.