p6745f: new graphics card does not start

Similar Questions

• HP Pavilion HPE - 515sc: new graphics card does not start

  When I change my graphic card, it starts not my monitor has the blue hp startup screen for 5 minutes and the computer shuts down

  @Storuu

  Yes, it works with a motherboard that has UEFI.  However, HP has their motherboards made to their specifications and is not the same as the commercial versions.  It is difficult to find a motherboard that has holes to match the accessory in the case.  In addition, the connectors in the case aren't always the same thing as retail motheboards.

• Windows, 3 beeps and new graphics card will not start

  Hello

  has obtained a HP p6-2105eo, windows 7. At a radeon HD 5670 graphics card that works very well. Bought a Gigabyte GeForce GTX650 2 GB. Can see screen start and seems it does not respond by clicking the Esc key. I hear 3 beeps with a delay of 20 to 30 seconds after each beep. After several minutes (2-3 minutes), the screen goes black with a command prompt flashes at the top of the screen on the left and nothing more.

  Think it might be damaged the card, so went to the store and got me a Gigabyte GeForce GTX660 OC 2 GB instead. The same problem.

  Also updated to the latest version of the available for my motherboard BIOS to: 2012-08-14, Version7.16 Rev A, 2.87 M

  Also already replaced at a 700W PSU, so that it can handle the best graphics cards.

  So, what could the problem with the recent graphics cards in this office?

  After numerous tests, such as reset cmos, bios reset, outside and inside with battery and so on... Nothing solved.

  Re-tested with the old graphics card and started immediately.

  After intensive research on Google, the BIOS is probably still too old to the new graphics card.

  Yesterday, I replaced the motherboard and the problem disappeared. Works fine now with the new card.

  Will use the older motherboard in an old computer instead, it isn't a total waste to replace.

• H8-1230 HP Desktop: new graphics card does not.

  I had a 560ti nvidia for 4 years. He died and I just bought a nvidia 970gt installed and I get the blue screen of the HP "press ESC to display the start screen"... (which does not). I hear a series of beeps and screen goes black with a '_' cursor flashing at the top left. Any suggestions? Thank you!

  Hello.

  If I were you, I would consider returning the card to the seller. ZoTac not even State who types BIOS supports. They are aware that BIOS support information would help their video card product owners.

  I joined their support forum to take a look at the help available.

  https://www.ZOTAC.com/

  You will definitely need a few stop for information beyond the Basic that was provided when you purchased the card.

• New graphics card - does not. (Windows Vista Bug, perhaps?)

  Hello.

  Recently, I inserted and installed a Club 3d Nvidia 9500GT graphic card in my Dell Dimension e521. I started to have problems when you try to update constantly of to a

  "> SetupNew\setup.cpp (135).

  PAPP:

  PVENDOR:

  PGUID:

  $14.0.0.162

  "@Windows Vista Service Pack 2 (6002) IE 8.0.6001.18999.

  Error message when you try to use the update of the software of the Nvidia site.

  Also, my games keep crashing and freezing, while completely ruin my sounds, me leaving no choice but to "Manually" (press and hold the button On / Off), turn off the computer.

  Please, is there anything you can do to help?

  Hi Thomas93Jensen,

  1. what display adapter you used before?

  2 were using an integrated graphics card?

  You can try to uninstall the previous display drivers and try to install Nvidia drivers manually and check.

  Step 1:

  Uninstall the drivers from programs and features (as applicable).

  a. click on start

  b. type appwiz.cpl in the start search

  c. find the display driver package, right click and uninstall the package

  Step 2:

  Then, uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search

  NOTE: Click on view the hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.

  c. then go to graphics cards and right-click on it and click on uninstall.

  Before reinstarting the system tries to doanload and install the Nvidia graphic card from the link below:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Message from Microsoft Windows Error Reporting that says: upgrade your display adapter graphics card does not support DirectX 9.0 or newer

  I have a message that says Microsoft Windows Error Reporting: upgrade your display adapter graphics card does not support DirectX 9.0 or newer.  My screen blanks outs initermittently and icons on the desktop are very grainy? all patches, easy?

  Hello

  
  Perform the steps in the article and see if the problem persists
  http://support.Microsoft.com/kb/283658
  
  Hope that helps.

• Satellite P850-133 - extended graphics card does not work

  Hello!

  I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.

  Hello

  The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
  The European driver Toshiba page provides 3 different display drivers.

  2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 8.15.10.2712).
  You must install the Intel driver and one of the nVidia drivers.

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?

• HP pavilian hpe h8-1205: my gforce 740 graphics card does not work in my HP Pavilion HPE h8-1205

  My 740 gforce graphics card does not work in my HP Pavilion HPE h8-1205, please help

  Supaman4040, welcome to the forum.

  I think that your problem is related to the BIOS.  The 700 series video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI in its motherboards up to mid-October 2012.  Your computer was released January 25, 2012.  You must contact the card manufacturer to see if they have a VBIOS update which will allow the card to work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• graphics card does not support pixel shader 2.0

  Original title: Pixel shader 2.0

  I tried to play League of legends download but when I started it upward, he said "graphics card does not support pixel shader 2.0" what can I do to fix this?

  Louis,

  Please go through http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/getting-an-error-direct3d-while-opening-league-of/a0cb03fd-f24f-44c8-98b6-545f0f0baf9e?msgId=91b97885-ed59-48bc-8120-ce24047ce8ef
  for a possible solution.

• Try to install the video card. Integrated graphics card does not! (PE T110 II)

  Hello

  I tried to install a video card in the x 16 slot PCIE (ASUS Radeon 5450 Silent). I read on the Board that this video card has worked for others with the T110 II.

  I turned off the computer and unplug the power cord.

  I installed the video card in the x 16 pcie slot.

  The VGA cable is connected to the integrated VGA.

  When I turn on the computer, my monitor receives no signal. I tried to access the bios to change the settings of the embedded video controller of standard to distributed. Unfortunately, I am unable to see anything on my monitor, it gets no signal. If I try to connect the vga graphics card it shows a screen black nothing else.

  The integrated graphics card works again once I remove the location PCIe video card. The integrated graphics card does not work while the video card is connected.

  I 2.8.0 bios version.

  I can hear the computer starts, but I don't see what is on the screen, I'm not sure if the bios is starting.

  Any help would be appreciated.

  Thank you

  Use the embedded video.

• Graphics card does not not need help! ATI

  I need urgent help my graphics card does not even work when I install the ccc... ok I me eplain how it happened...

  OK, I bought my laptop (Hp Pavilion dv6 i3 - ATI Mobility radeon premium with windows 7 professional graphics card), after a while, I got bored of windows 7 so I installed windows 8... Windows 8 (32 bit) I could not install the graphics card driver or the ccc on windows 8 and had anoyed so I used the disc that came with my computer hp laptop and I reinstalled windows 7 Professional...

  I installed the tools hp etc... using its disc and tried to install the ccc & all ati drivers when I install ccc it either installs when I restart my pc my screen starts flashing when the pc comes on from time to time and in ccc, it shows the screen area 0 x 0.  ... also, I have tried many other versions of ccc sometimes it still does not work or install I installed dot net framework as well.

  Please could someone help me that he used to work before I installed windows 8

  Thank you very much

  After a lot of time looking for a good ati driver I found it,

  my laptop: HP Pavilion dv6-3060si Entertainment Notebook PC

  So I typed in hp Web site and got these drivers: link

  My graphics card is working now

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.