P7 - 1000 c: Desktop does not start. (hp pavilion p7 - 1000 c)

Similar Questions

• HP-P7-1026 b: Desktop does not start on Windows 10.

  Desktop computer does not start after reboot. Windows 10 message PREPARING AUTO REPAIR leads to next screen CHOOSE YOUR KEYBOARD LAYOUT and freezes / disables keyboard and mouse.

  Virus ISVProgramme can do so many things, do not rely on them. Also, why buy a new hard drive! Yours is still perfectly fine. I guess staples suggested, to avoid dupes. If you want a new hard drive. Your recovery disk should work as well as your old hard drive like new.
  Do not open e-mails that you are suspicious. One click and they own a computer.
  Good luck.

• CC desktop does not start.

  After download and installation of the CC Office, it just does not start. I tried to uninstall and it doesn't also. I use PC / Windows 7 / 32 bit
  I tried several times and does not work. Any ideas?

  Rogerior56227357 have you used the desktop Adobe Creative Cloud application uninstall utility?  If not, you can find the download and instructions to Creative Cloud help | Uninstall the creative desktop application Cloud.  You can also find a link on the page to re-download and install the desktop creative cloud application.

• Desktop HP Envy 700qe: failure motherboard on HP Envy 700qe desktop, does not start

  My computer does not start.  It's the same problem I had in December 2015 still under warranty.  HP replaced the motherboard.  Now (July 2016) is once again, it is beyond the 90 days replacement warranty.  I can buy another motherboard for replacement and install it myself?  If Yes, what is the replacement part that I should look for?  I have Intel core i7-4770 3.4 G 8 M 84w CPU and 2 TB of disk hard.

  You're welcome, @Bobirdie.  Thank you for the additional information.

  This is a refurbished motherboard from Newegg.  Personally, I would have no problem to buy from them.  I bought thousands of dollars of computer components to them.  You can look at the following to see if you can find one for less money.  I think you'd be able to find a new one on ebay.

  If you have never replaced a motherboard, and even if you replaced one, my best advice is take some very good pictures of the motherboard before you start deleting connections.  I normally lable cables on the power supply unit (PSU).  It would be good to take pictures of the connectors to the front of the case, too.  This will save you a lot of frustration later.  It is not difficult if you take your time and I suggest to use an anti-static wristband to make sure you do not damage the components.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Creative Cloud Desktop does not start

  What creative Office Cloud tries to start the icon appears briefly in the upper part of the screen and then goes.  The application does not start.  I was in a conversation with the support of Adobe, but no luck.  Any ideas?

  I just finished a new version of the software.  Reformat the disk, installed the operating system and loaded software at the same time.  Everything works as it should now but it's of course a lot of work.

• Double partitioned Pavillion Desktop does not start in Windows 8

  I have a desktop HP Pavilion partitioned with Ubuntu installed next to Windows 8. For the most part, I'm working on Ubuntu, half, which is fine, but I have some important files on the windows half too. Recently, when I tried to start Windows in the boot selection menu, a long stream of errors came up through the screen and put me right back to the beginning. Something along the lines of 'invalid path UEFI.

  I was also informed that the Ubuntu Startup Repair utility should work to fix, and I tried to run a live CD of Kubuntu. The problem is, the computer will not also boot from CD - I changed the boot order to make it work, but he acts as if there is no disk in the drive. I know the drive works because I used to install Kubuntu on my laptop a few weeks ago.

  Keep in mind, the computer is still usable as it always starts in Ubuntu, but I have a few applications that I use from time to time that are incompatible with Ubuntu and too intensive to use on an emulator. things like video games, software design and other. As a user of the Linux die-hard, I never thought I would say this, but all I want is my gosh - darn rear window.

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you resolve the issue.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  Consider DISABLING "secure starting" and ENABLING 'Legacy Support' in the BIOS. Please see "computers HP - secure boot (Windows 8)" for more information about "Secure Boot" and how to toggle the "Secure Boot" and "Legacy Support".

  Please click the White Star of KUDOS to show your appreciation

• New Acer desktop PC does not start

  Original title: Please help! New Acer desktop PC does not start and the Acer Support is useless! 

  Have desktop Acer running Vista.  When turning the power on, screen stops at a black screen with "American Megatrends" and "press Delete to enter Setup or F12 for BBS Popup.  Bed features but cold stops at Auto detecting USB storage devices.  Have you tried typing Delete on startup and F12 also.  Also tried F8 and F10 control.  Nothing seems to work.  Sometimes when I hit Delete or F12 at the power, subsequently will pass on their corresponding monitors but it takes literally hours sometimes.  I downloaded a Vista Recovery of Neotech and tried to have the start of the DVD system, but obviously, it didn't work.  Had the same problems when I had to restart.  Please help had only 1 month, is going to launch windows soon!

  Hello

  You have serious hardware problems and need to file a complaint with Acer.

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• Keyboard Microsoft Wireless 1000 and a Microsoft wireless optical mouse 2000 - my computer does not start.

  Hello.

  I have Microsoft Wireless 1000 keyboard and an optical mouse wireless Microsoft 2000, they worked fine on my old computer with XP.

  Now, I bought an Acer Predator G3620 with Windows 7 and my computer does not start. He stops and beeps when it says "Press DEL to enter setup", this continues to the repeat. When I use the wired Acer keyboard and mouse the computer starts normally.

  When I inserted the original CD with the drivers, it gave an error of compatibility with this version of windows. So I downloaded the drivers and everything seemed fine. But when I start the computer (or reboot) I have to disconnect the transmitter/receiver or the computer stops and beeps.

  Once the computer is turned on, I can reconnect the transceiver, and it works fine.

  Find it me hard to believe that it has to bee like that.

  I have to buy a new keyboard and mouse?

  Brgs,

  Robert

  Go into the BIOS of the ACER and set it for legacy USB, USB mouse, USB keyboard, or along those lines...

  Then, go here for the drivers...

  http://www.Microsoft.com/hardware/en-us/downloads

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• Creative Cloud Desktop App does not start after installing Mac OS Yosemite

  Hi all,

  I just updated my Mac OS to Yosemite. Now, Creative Cloud Desktop App does not launch and InDesign CC 2014 (10.1.0.71) crashes trying to find the Roman.txt file, I have replaced it with a copy of the TimeMachine when he worked in the Mavericks.

  I trashed the caches and reinstalled the same preferences, but it keeps on does not start.

  The rest of the applications (with the exception of InDesign and Creative Cloud Desktop app) do not work properly.

  All ideas will be welcome.

  Thank you!

  Mac migration (or Time Machine) do not work with the Cloud program activations

  Uninstall... to run vacuuming... Restart your computer... Reinstall

  -using the vacuuming after uninstalling and before you reinstall may help

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• H8 - 1280t - QC461AV #ABA: desktop HP - computer does not start after the installation (Windows 10) video card

  So, I just bought a new video card an XFX R9-390 and a new HX1200i POWER supply corsair (overkill ik ) that I put on a card mother IPIWB-PB for my 3 years old HP PC, and the new stupid video card is not working. the PC just does not start, I see is a black screen. My monitor is an HP 2311gt and I can't use my computer with the old video card no probs, BUT whenever I have to install the new card does not detect my monitor just and I only see a blank screen. I HAVE NO IDEA HOW I'M DOING. Help, please

  PS. I have RMA the new power supply and the video card and they got to check and send back to me, so I know that the two pieces of equipment are working very well AND of course I am currently using my PC with the old video card

  Wiraqocha, here is the link to start safe for HPs with Win 10 and instructions to enter the BIOS. It may be useful:

  HP PC - secure boot (Windows 10)

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• Mini laptop of HP 1000: mini windows laptop computer does not start

  My mini laptop from HP is saying windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can try to repay this file by starting windows setup installation CD using the original.

  Hi there @kgoen81

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you receive a message from a missing file, and that your system does not start. I'm happy to help you.

  First, I recommend that make you an external backup of data on the hard drive. There are several ways you can try to do that, but here is a page with a few possibilities:

  How to recover data from the hard drive to a laptop dead - eHow.com

  Also, please post the complete product and the operating system running on your laptop. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  For now I'll assume you have windows 8.

  Computer won't start (Windows 8)

  You can also visit this page, and in particular you want to go with the automatic repair options. I would try before using a full system recovery to an original image, on the previous page I linked.

  System - Boot of Windows 8 recovery options - eightforums.com

  I hope this helps.

• Vostro 200 desktop computer does not start

  Hi all, our company has an old desk, Vostro 200, which works very well for a few years.  A day after the cleaning, the machine does not start with the amber light.  Fans stop, even the power supply fan stops.

  I tried:

  1. using a different power supply, it's the same thing.

  2. using another CPU, it's the same thing.

  After I unplug power 4 pin for the processor, fans start working and it seems normal but show nothing.

  I also tried out the case from the jury and put it back, in order to avoid any shortened with the case.  It does not work.

  What is the failure of the motherboard? I had a copper shortcut or circuit on the map?

  Although it is an old computer, but we do not produce a bin with other parts in good condition.

  Thank you.

  One last thing is the license Windows XP OEM's sucks it as well as the motherboard has failed because the license is listed in the BIOS?  Thank you.

  CECTT

  Thanks Bev

  1. After spending the Green and black cables, the situation is the same: the fans stop with power of CPU 4 pin; fans of work without power CPU 4 pin.

  2. after disconnecting devices PCI/video /, the situation is the same, still no beep.

  3. after remove the memory, the situation is the same.

  After checking the CPU socket, I put that there could be some not vertical pegs.  Is it possible that I folded a few pins so that it didn't?

  Thank you

  CECTT

  Yes, it is possible, the processor installed correctly, for more information, go to pages 152 to 155 of the owner's manual, if the LGA 775 is damaged, this may require a motherboard replacement.

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  The Vostro 200 was built with two different systemboards.

  Motherboards should have engraved on it model number.

  If she says G33M02, then it only supports Core 2 Duo processors.

  If it says G33M03 then it supports Core 2 Duo and Core 2 quad cores processors.

  What are the OEM sSpec numbers and processor that was installed as a replacement?

  http://www.Intel.com/content/www/us/en/support/processors/000005554.html

  Have you tried to reinstall the original OEM processor?

  In addition, the procedure is usually to Flash the BIOS to the latest version, before the upgrade of the Vostro 200 processor.

  Bev.

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10