Page alignment

Similar Questions

• Photosmart C4485: Page alignment printer Photosmart C4485

  Hi all patients).

  Briefly:

  Used my printer Photosmart C4485 almost a year without worries. My daughter has tried to replace the cartridges and print the alignment page. The book got stuck in the printer, the print alignment page was not completely finished.

  The printer was asked to place it inside for scanning, had no proper scanning alignment page and since then, I can't use the printer more.

  Does anyone have a suggestion about a fix?

  TIA,

  Vio

  PS: Don't have a friend with the same printer to ask it an alignment :-(page...

  Hi @Vio,

  Welcome to the HP Forums!

  I see that you are unable to print the alignment with your HP Photosmart c4485 printer page. I'm happy to help you!

  Please, try the procedure described in this guide, an "alignment failed" Error Message is displayed on the control paneland let me know what happens!

  Hope this guide to solve your problem and have a nice day!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• How to stop the printer to print the page alignment each time that the printer is turned off?

  I have the HP 2480 all in one printer/copier/scanner. Never understood how to scan to my computer, but it's not my problem. Whenever the printer gets cut and then cut on it automatically prints an alignment page. How can I he stop doing that. I'm tired of wasting paper and ink.

  Hello

  The printed sheet is a part of the process of alignment to align the ink cartridges.

  Make sure you complete alignment by following the steps below, otherwise the printer will keep printing the page because the process was not completed.

  http://support.HP.com/us-en/document/c01764745

  Kind regards

  Shlomi

• Constantly go to page alignment

  HP 8500 constantly go to align the page. I cancel and it will be printed and go right back to the alignment page.

  Generally, this is caused by a problem with a connection in the provision of the printer ink or printhead (s) goes wrong.  I advise to try to remove the two printhead of the printer, wipe the electrical contacts with a lint clean and clean water, then re-install printhead into the printer.  Make sure the printhead blue lever is fully locked in the lowered position.

  Thus, there is a document provided by HP with the steps to help solve this problem.  The document can be accessed here.

  Let me know how it goes.

• Master page + alignment problem

  Hello

  Basically, I work on my site and I created an A-master page. Then I realized that I wanted to have a different master page because I wanted to MAKE another level to appear with the main master page. I'll do that for 3 subheadings more. It should be clear with the photos that I've provided (the right image is the homepage)

  Anyway. When I click on "Editor" he's going to the B-Master page, but this move a few centimeters down. I have reproduced the A-master page, it should be the same alignment. I had problems with the creation of the site where I had to group them so that it works correctly, so I tried this as a solution, but it did not work.

  Any help is appreciated.

  

  I thought about it. This is because the header at the top was not in the same position to the other. (God knows why it was not, because I have duplicate pages.)

  I think that when I was inserting a YouTube embed player should have played a little with it. I'm not sure.

• Alignment of forms of Oracle - Oracle adf page alignment.

  Hi experts,
  
  -jdev 11.1.1.5.0 - adfbc.
  
  I would like to start topic on the pages of jsff/jspx ADF using the time consumption component alignment. and then the lower consumption of time on oracle form alignments.
  
  If an Oracle Forms.report devlopers know on center top, left, right... jacks simply select once hit get aligned in a nice way
  
  am not compare to subject of cell technology.
  
  My question is:
  
  are there other components in jdev will reduce my time to design makeup my more intelligent and faster. beautiful in alignments with small quantity time.
  
  so far,.
  
  Perhaps another way. I dnt know I put a lot of time in desgining than my business logic.
  
  If I lend to prepare adf page means
  
  design time take 5 h per day.
  
  Business logic & validations and blah blah sometimes preety hard. but it happened less than three hours.
  
  am feel free to use of façade in the adf. but sometimes ran into trouble (not errors) some ugly degins made by me.
  
  not bad, I learned a few things here (to the adf pages desgins) and some blogs. Although a few times I did mistakes in the designs.
  
  could someone show me this way. How quickly in the desgins. ?

  ADF7 or user707,
  I recommend that you play with the possible combinations and the page layout components. You may not assume that we have the answers for each question, something that you need to find yourself.
  You're the one who knows what your user interface should look like, then you are best placed to adopt components of ADF layout to your need. ADF is not forms, so you can't expect that both look or behave the same (wise gui).

  Timo

  P.S.: What the change of name again? Why not give us your real name?

• Booklet: How to get the pages aligned?

  I have 16 pages A5 printed on 4 sheets A4. The pages are printed on sheets in the right order and stppled and partially folded on the printer. A single error, is that the pages on the 'back' of the book get turned 180 degrees. For eksample: page 2 and 15, which must be printed on the back of the first sheet, turned 180 degrees. The same alignment error (?) pages occurs when the second sheet have page 4 and 14 printed on the face back of 3 and 13.

  How can I get this right?

  The printer I use is an Océ CS163

  Please tell me if you need more or some spesific information

  -Erland

  You have the options of link on your printer options?

  On our printer here I have to change to Auto link to the left or Top link according to

  Your printing options can be different

  

• Master page align left and right online

  Hi guys,.

  How can I do to have a line that is the same line in the master page where the title aligned to the left and right page number?

  Here is my real sample

  

  Here's what I want to achieve

  

  I tried with tabs, but I'm not sure it will work when the number is in double figures. Sorry for the newbie question.

  See you soon,.
  S

  Hello

  Of course, you can use tab. It will work. This solve the alignment of a paragraph left or left justify and use the tab right alignment (use appropriate tab position value) or giving Shift + tab (tab of withdrawal right) before the page number it it line up right.

  Thank you

  Green4ever

• Table of contents - several line Page # alignment problem

  Hi all

  I have a Table of contents, in which I have a few entries that develops in two lines.

  When the contained entries Table expand to two lines, leader are not added and page numbers shows next to the entrance.

  See Image below: entrance with RED ARROW - 1.9.4 indicates Page 44 without a leader:

  

  No explanation will be appreciated.

  Thank you.

  No need to change the titre3 paragraphs. Look at the reference to the table of contents page. There is probably a page containing the TOC tag that defines the format of the entries in the table of contents. There the paragraphs which badges are derived from paragraphs in the main document that generate entries by adding OCD to the original label. Thus, registrations for titre3 paragraphs are marked Heading3TOC. The reference page has a Heading3TOC which looks like point something lke:

  <$paranumonly>  <$paratext>.........................<$pagenum>

  When there is a tab between <$paranumonly>character and <$paratext>that moves from the left side of the <$paratext>2.0 cm, and another tab between <$paratext>and <$pagenum>that moves to the right of the <$pagenum>-12.0 cm.

  I mean put a space before the second tab. You can also add an additional tab before the <$pagenum>.

  -Lynne

• Size different InDesign pages aligned on the top edge.

  I want to do a layout with different page sizes. So far so good. If I put these pages side by side, they should be about the same on the top edge. Now, they are lined up in the middle. What can I do?

  You can drag the page upwards or downwards with the tool of the page.

• Some pages aligned more to the left than others

  Hi all

  I have a pretty simple site with every bit of functionality works very well, but I don't have the weird problem that some pages are moving to the left when loaded in a browser.
  All the pages have the same master page and all the alignments are the same in Muse, so I don't know what could be the cause. I'm not using pegs.
  Any ideas on how I could fix this?

  Here is the link to the site, the pages that are incorrect are: home, Committee, youth and Rehab

  
  http://yaandina.BusinessCatalyst.com/index.html

  Hello

  You are right, that the vertical scroll bar is the reason for the page to the left.

  To resolve this problem, you can add a scroll bar to all pages. To achieve the same thing:

  On the file menu in Muse, select Site Properties. The visibility for the scroll bars vertical browser, set to Always.

  

  It will be useful,

  Sonam

• Page alignment problem

  I have a page that is centered and it's great when I look with Live

  Display, but as soon as I save and open in a web browser is not at the top of the page

  more.  It seems that I've spaced down and then put the content and I can't understand why.

  Any ideas?

  I saw your link.

  Start by correcting your errors in code.

  http://validator.w3.org/check?verbose=1&URI=http%3A%2f%2Fwww.rennerts.com%2Fcontact2.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Dreamweaver web page alignment

  I'm new to this forum and I hope that I use it properly. When viewing my webpage (threeriversgallery.net), he is lined up to the left of the screen. How do I focus?
  Thank you. -Don

  I'm new to this forum and I hope that I use it properly. When viewing my webpage (threeriversgallery.net), he is lined up to the left of the screen. How do I focus?
  Thank you. -Don

• HP2540: Try to scan document as hp2540 10.1 Windows gives printing alignment page

  When I try and scan a document using HP2540 10.1 (64-bit) Windows, scan seems to work, but simply creates an image of the page alignment test, rather than the document.

  The printer before 10 Windows, but not sure that we scanned in fact do anything during this time. It is perhaps the first time that we tried. (I must say, downloaded application all-in-one 100 MB seems like overkill for a driver, which does not seem to recognize when even as a Windows driver)

  Have been rattling for a couple of hours trying to update the drivers - think this may be the cause? - but things have got more complex since I finally made this kind of thing (20 years ago!) and Windows insists the drivers are up to date...

  I expect the problem is due to my Windows - tips or tricks received inadequacies with gratitude...

  Have you tried to check what is in the document that you are trying to scan?

  -Uh, not until just now.

  Nothing to do with the page alignment left on the scanner test, then...

• HP Photosmart C 4680: C4680 - Test ok but the alignment page is of poor quality and can not print a good quality copy now

  After changing the black cartridge, we are not able to print a page of alignment of good quality, although the test page prints fine. We tried to align page alignment of old and of good quality, and he is still not able to print a good quality alignment page. We have tried to clean the print head, but it cleans only the first round. It is a brand new HP cartridge that is used. Do we need a new cartridge or is there something else we can do? Thank you.

  Thank you for your response. I have contact support who thought that it was a problem of breakdown of pen and I ended up having to buy a new printer.