PAGE_FAULT_IN_NONPAGED_AREA (nvlddmkm.sys)

Hello

I used to have a BSOD, DRIVER_POWER_STATE_FAILURE, which fixed by updating my Nvidia driver. Now I keep having PAGE_FAULT_IN_NONPAGED_AREA (nvlddmkm.sys). I don't know if it's the problem of the driver, but it's really annoying. My computer freezes at random about 2 - 5 times a day. While watching videos, playing games, surfing on the web and just being AFK. I studied the problem a lot and I have not found a solution for it.

NVIDIA GeForce GT 640M 2 GB of VRAM

64-bit Windows 8

Acer Aspire V3 - 571 G

If the problem is not resolved, I'm going to get it fixed, it is still under warranty. Although it is like 100 km by bus... :/

Advertisement

Hi LG33,

I do not think that you have owned this camera very long, so I'll assume that the graphics card is not defective. This is usually caused by a driver problem. I would say do a refresh on your system (no data loss) by following the steps listed here: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc

Try it, if you still have questions after probably have a hardware problem.

Tags: Acer

Similar Questions

  • blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

    Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

    nvlddmkm.sys

    PAGE_FAULT_IN_NONPAGED_AREA

    Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

    other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

    I tried the diagnostics start and the only problem was:

    Error code: 0F00:133 media suitible C Msg:No drive is present

    and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

    Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    The kernel version of Windows 7 7600 SQUARE free x 64
    Product: WinNt, suite: TerminalServer personal TerminalServer
    By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
    Computer name:
    Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
    The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
    System Uptime: 0 days 1:03:33.572
    Loading the kernel symbols
    ...............................................................
    ................................................................
    .......................................
    Loading user symbols
    Loading unloaded module list
    .......
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

    Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for nvlddmkm.sys
    ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

    Could not read the name of the problem driver
    Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

    Follow-up: MachineOwner
    ---------

    KD >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    It must be protected by a probe.  In general, the address is simple bad or it
    pointing to freed memory.
    Arguments:
    Arg1: fffff88007000000, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
    address.
    Arg4: 0000000000000000, (reserved)

    Debugging information:
    ------------------

    Could not read the name of the problem driver

    READ_ADDRESS: fffff88007000000

    FAULTING_IP:
    nvlddmkm + 135b1e
    fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

    MM_INTERNAL_CODE: 0

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    BUGCHECK_STR: 0 X 50

    Nom_processus: System

    CURRENT_IRQL: 0

    TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
    NOTE: The frame trap does contain not all registers.
    Some registry values can be set to zero or incorrect.
    Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
    RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
    RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
    R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
    R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
    R14 = 0000000000000000 r15 = 0000000000000000
    iopl = 0 nv up ei pl zr po nc
    nvlddmkm + 0x135b1e:
    fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
    Reset the default scope

    LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

    STACK_TEXT:
    "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
    fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
    fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
    fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
    fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
    fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

    STACK_COMMAND: kb

    FOLLOWUP_IP:
    nvlddmkm + 135b1e
    fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

    SYMBOL_STACK_INDEX: 3

    SYMBOL_NAME: nvlddmkm + 135b1e

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: nvlddmkm

    Nom_image: nvlddmkm.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

    FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

    BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

    Follow-up: MachineOwner

    Hi anchit02,

    Thanks for posting.

    The page fault has a high probability to be RAM or hard drive related.

    You can test the computer memory using the memory diagnostic tool.

    You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite L50T - A047 PSKL6V crash - Win 8 - nvlddmkm.sys

    Hi - I need some help please.

    My computer crashes, even after a complete restoration with the BSOD message above.

    + Win 8 - unexpected Kernel Mode trap (nvlddmkm.sys) +.

    I tried to update the NVIDIA driver, but it will not update. All Windows updates are current as of yesterday. It seems more crash when trying to access file Explorer.

    This machine is 2 months old.
    I could really use some suggestions or solutions!

    I have restored the machine to factory settings and still no problem crashing.

    Thanks in advance...

    * _My machine: _ *.
    Model name SATELLITE L50T
    Part number PSKL6V-002002AR
    OS Microsoft Windows 8 6.2.9200 language version
    BIOS Version 1.10

    Find different information about the error:
    + Win 8 - unexpected Kernel Mode trap (nvlddmkm.sys) +.

    The nvlddmkm.sys belongs to the nVidia driver that's why I recommend to uninstall this driver first.
    After the new reboot, you should clean the system using tools such as for example: CCLeaner

    Also look for a "Minidump" folder in the disk Local (c) / Windows and remove this "Minidump" folder located in "(c) / Windows.

    After rebooting again to check the functionality of the laptop and install the nVidia Driver has published on the page of Toshiba

  • nvlddmkm.sys error

    I've had Windows Vista for about 2 weeks now, and I've done 4 fees installs try different confgurations for this error to the LESS to a minimum. When I use the operating system 3d treatment, I get the error...

    "Display driver nvlddmkm.sys has stopped responding and has recovered."

    This seems to be a plague of Vista users, on searching the net for an answer as to why, it seems to happen for all versions of Vista both 32 and 64-bit. Happeneing for people using different video card, ATI and nVIDIA chips. NVIDIA users get nvlddmkm.sys error and ATI users get the error atikmdag.sys.

    This error most commonly appens when I'm a game or using a 3D or graphics program such as GIMP and the Blender and rarely when just using the Explorer. The program that I use currently hangs, and I use the "Task Manager" to stop the programme concerned. If I reboot the system, I get this error whenever I'm trying to use the same or similar program. After the reboot, it is just a matter or an hour, it seems, before that happens again.

    For me personally this has happened using 3 chipsets of different motherboard and 3 different video cards. Same scenario is becoming very frusterating. Someone has ideas News on how to stop this?

    Hi V3X,

    Please use the forum for Support of Vista,

    Unfortunately, it is a known problem that occurred in Vista and Nvidia or Ati driver as you said.  It is not a fix for this yet.  There are a few works about depend on the hardware you have.  If you communicate with Nvidia, they will be able to tell you exactly what to do to work around this problem.

    Sorry again.
    Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BSOD error: 0 x 00000116, nvlddmkm.sys, attempt to reset display driver and recover timeout failed.

    Original title: BSOD, Vista Home Premium, HP Pavilion dv6000 (laptop)

    Full text of the error message (most frequently observed when playing Bejeweled 2 Deluxe, although it happened before the game has been installed):

    A problem has been detected and Windows has been shut down to avoid damage
    on your computer.

    Try to reset the display driver and recover from timeout failed.

    If this is the first time you've seen this stop error screen,
    Restart your computer. If this screen appears again, follow
    the following steps:

    Check to make sure any new hardware or software is installed correctly.
    If this is a new installation, ask your hardware manufacturer or software
    updates to Windows, you may need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable the BIOS memory options such as implementing caching or shading.
    If you need to use Safe Mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options and then
    select Safe Mode.

    Technical information:

    STOP: 0 X 00000116 (0X8CB26300, 0 X 000000022, 0X8B014A70, 0X00000000)

    nvlddmkm.sys - address 8B014A70 base at 8B00B000, DateStamp 493750e2

    Data collection for the crashdump...
    Initialization of the disk for the crashdump...
    Beginning physical memory dump.
    Dumping physical memory to disk: 100
    Total physical memory dump.
    For more assistance, contact your system administrator or technical support group.

    Hello

    It's my generic how updates of appropriate driver: (update your video/display driver).

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your
    System. For each driver in the list, additional useful information is displayed: load address
    of the driver, description, version, product name, company that created the driver, and
    more.
    http://www.NirSoft.NET/utils/DriverView.html

    To check system drivers manufacturer as replacements and camera manufacturer who are most
    current. Control Panel - device - Display Adapter Manager - note the brand and
    fill out the template tab of the driver for your card video - double-click - write down the
    the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
    certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
    stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
    evening with their own software and drivers and all other main drivers you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
    Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
    (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
    After each installation.

    Always check in the Device Manager - drivers tab to be sure the version you install
    actually arises. This is because some restore drivers before the most recent is installed
    (particularly that audio drivers) so install a driver - reboot - check is to be sure
    installed and repeat if necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable driver facilities in
    Windows updates, that leaves about Windows updates but it won't install drivers
    who will be generally older and cause problems. If updates offers a new driver can
    HIDE (right click on it) and then go get new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Windows Vista blue screen 0 x 0000116 nvlddmkm.sys

    * Title *.
    nvlddmkm.sys causes BSOD

    Hello

    I can't boot Vista from a week or two. Just before that the login screen should apear, it crashes into a BSOD, claiming that the problem is the driver nvlddmkm.sys.
    I was checking the Internet for days now (a lot of forums), and it seems to be a 'common' problem, that occur with all the hardware and software of sorts features. I tried almost everything to fix, but nothing seems to work.

    Is there a solution for this problem?

    Maarten

    Compaq Presario SR1909, 7600GS, Vista Home Premium gForce.

    Hi Maarte61,

    Unfortunately, I think would be the driver or the card itself. Since it worked fine, then just stopped. My best guess would be that the card is the issue. You can cancel the driver installation when you arrive at the normal mode? If so, I would try cancel and download the new driver. Or if your in "safe mode with network" I go ahead and download them and ask them to loan. So if you can cancel it, you wouldn't have to go download them. Let us know and thanks again for posting.

    Thank you

    Jason
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • SE error message: "nvlddmkm.sys not answer but recovered" and cannot access Starcraft II or LOTRO

    Original title: nvlddmkm.sys does not

    Just started having this couple weeks message. Killed or damaged at least one of my 9800 GT cards (SLI), which have been replaced under warranty. Who sets the part of the question of the display, but still cannot access to Starcraft II or LOTRO - connect and just get a black screen (have sound, no picture). Then the message "nvlddmkm.sys not answer but recovered" then nothing and having to use task Mgr to close the program. Here's the suspect: update the video driver (uninstalled old, clean install) which again helped a little but the screen remains black when entering the games. While they inspected the files, the file Nvidia\Displaydriver shows the new driver as the device Mgr when I check that. BUT then when I check the directory ofC:\windows\system32\drivers there is still an OLD version of nvlddmkm.sys. I'm sure that it is the culprit, but it won't let me delete it or rename it who were other corrections that I read about. I know that this is an endemic problem with Windows and has been for awhile now. ANY suggestions?

    Hi malomar,.

    1. This only happens when you play Starcraft II and LOTRO?

    You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

    Step 1:

    Uninstall the audio drivers from programs and features

    a. click on start

    b. type appwiz.cpl in the start search

    c. search for all driver packages, Nvidia, right click and uninstall.

    Step 2:

    Uninstall the drivers from Device Manager.

    a. click on start

    b. type devmgmt.msc in search, and then press enter

    c. in find Manager device for the device, right-click on it and select the option uninstall.

    After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

    Step 3:

    To delete the folder:

    one. Click on start and Type C:\windows\system32\drivers folder in start search

    b. click on drivers and select nvlddmkm.sys

    c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

    d. restart the computer and check.

    You can also check the manufacturer's website and download the latest drivers from Nvidia:

    http://www.nvidia.com/download/index.aspx?lang=en-us

    Also check the Nvidia support link:

    http://forums.nvidia.com/index.php?showtopic=45605

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • video card error message, "nvlddmkm.sys has stopped responding and has recovered."

    My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

    Hello

    The best sources of information would be Nvidia Support, their documentation online and their
    forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
    When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
    and vents. Make sure that the internal fans are working and trying to use a small fan to blow
    directly into the inlet to see if that helps.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    ==============================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Nvlddmkm.sys - Windows 7. Help, please.

    I searched and have found no clear solution, although there has apparently been a problem for years. I have not recently add any material. Heck, I wasn't even play all the games. I just browsing a site based on text when this has occurred first.

    Here's what WhoCrashed said about my problem:

    Wednesday, April 7, 2010 10:34:08 your computer crashed
    This was probably caused by the following module: nvlddmkm.sys
    Bug check code: 0 x 116 (0x94513A30, 0x86F2E008, 0 x 2, 0 x 0)
    Error: VIDEO_TDR_ERROR
    Empty the file: C:\Windows\Minidump\040710-28142-01.dmp
    file path: C:\Windows\system32\drivers\nvlddmkm.sys
    product: NVIDIA Windows Kernel Mode Driver, Version 196.21
    company: NVIDIA Corporation
    Description: NVIDIA Windows Kernel Mode Driver, Version 196.21

    I tried to uninstall my driver and put it back. Who has actually worked temporarily, but the problem came back and is now more widespread than ever. As soon as I click on anything, whether the computer crashes. I'm stuck in Mode without failure. I had tons of problems since upgrading to Windows 7...

    I'd appreciate any help I can get.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • T410 nvlddmkm.sys BSOD on startup

    Hi all

    I had my T410 since the end of last month and had a BSOD on startup several times so far. Whenever I caught, I noticed that the driver nvlddmkm.sys nvidia was the cause. Each time the BSOD, I get the prompt "windows did not start successfully", how by selecting "Start windows normally" translates the fine start System. Since this BSOD is only presented to a cold start, I'm not too hampered by it outside my boot up times by doubling the time it does. I ran the update of the bios/driver Thinkvantage, as well as I'm running with the latest updates for Win7 Pro x 64.

    Everyone knows this? If so, have you found a solution? No matter what Lenovo personal support out there have an entry?

    Thank you

    TSalinas


  • Windows 7 blue screen 0 x 000000116 with nvlddmkm.sys

    Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [D:\MEMORY. DMP]
    The mini kernel dump file: only registers and the trace of the stack are available
    Symbol search path is: * invalid *.
    ****************************************************************************
    * Loading of the symbol may be unreliable without a symbol search path.           *
    * Use .symfix to get the debugger to choose a symbol path.                   *
    * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.
    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Could not load the ntoskrnl.exe, 0n2 error Win32 image
    WARNING: Unable to verify timestamp for ntoskrnl.exe
    ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Computer name:
    Core = 0 x 84403000 PsLoadedModuleList = 0x8454d850
    The debugging session: 12:52:48.258 Wed Aug 17 2016 (UTC + 08:00)
    System Uptime: 0 days 0:00:35.209
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.
    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Could not load the ntoskrnl.exe, 0n2 error Win32 image
    WARNING: Unable to verify timestamp for ntoskrnl.exe
    ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
    Loading the kernel symbols
    ...............................................................
    ..................................................
    Loading user symbols
    Mini Kernel Dump does not contain the list of discharged drivers
    Failed to load image dxgkrnl.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for dxgkrnl.sys
    ERROR: Module load completed but symbols can be loaded for dxgkrnl.sys
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************
    Use! analyze - v to obtain detailed debugging information.
    Error checking 117, {88 99008, 9153fed8, 0, 0}
    WARNING: Unable to verify timestamp for mssmbios.sys
    ERROR: Module load completed but symbols can be loaded for mssmbios.sys
    WARNING: Unable to verify timestamp for dxgmms1.sys
    ERROR: Module load completed but symbols can be loaded for dxgmms1.sys

    The kernel symbols are FALSE. Correct symbols to do the analysis.
    *************************************************************************

    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    WARNING: Unable to verify timestamp for nvlddmkm.sys
    ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    Probably caused by: nvlddmkm.sys (nvlddmkm + 13eed8)
    Follow-up: MachineOwner
    ---------
    1: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************
    VIDEO_TDR_TIMEOUT_DETECTED (117)
    The display driver did not timely.
    (This code can never be used for actual error checking).
    Arguments:
    Arg1: 88 99008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
    Arg2: 9153fed8, the pointer in the responsible device driver module (e.g. owner tag).
    Arg3: 00000000, the secondary driver specific bucketing key.
    Arg4: 00000000, optional internal context data dependent.
    Debugging information:
    ------------------
    The kernel symbols are FALSE. Correct symbols to do the analysis.
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.

    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    Your debugger is not using the appropriate symbols *.
    ***                                                                   ***
    In order for this command works correctly, your symbol path *.
    should point to .pdb files have the type information complete.      ***
    ***                                                                   ***
    Some (such as the public OS symbols) .pdb files are not *.
    contain the required information.  The contact group that *.
    you provided with these symbols, if you need this command for *.
    work.                                                          ***
    ***                                                                   ***
    Type referenced: nt! _KPRCB *.
    ***                                                                   ***
    *************************************************************************
    ADDITIONAL_DEBUG_TEXT:
    Use '! findthebuild' command to search for the generation of target information.
    If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.
    FAULTING_MODULE: 84403000 nt
    DEBUG_FLR_IMAGE_TIMESTAMP: 4fb2071b
    FAULTING_IP:
    nvlddmkm + 13eed8
    9153fed8?              ???
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_TIMEOUT
    TAG_NOT_DEFINED_202b: * unknown tag in the list analysis 202 b

    BUGCHECK_STR: 0 X 117
    CURRENT_IRQL: 0
    STACK_TEXT:
    WARNING: Information not available stack unwind. Sequence of images may be wrong.
    8eddcb30 91f765b8 9153fed8 00000000 88 69008 dxgkrnl + 0x81a5e
    8eddcb9c 91f7597e 00000000 00000001 88 99008 dxgkrnl + 0x825b8
    8eddcbbc 91fb192c 00000000 00000102 88 69008 dxgkrnl + 0x8197e
    8eddcc34 91fdb944 fffffcfb 00000000 0000075b dxgmms1 + 0x692c
    8eddcc5c 91fdc065 00000000 00000000 00000000 dxgmms1 + 0 x 30944
    8eddcc98 91fb88f0 8eddcc90 8443a50e 88 69008 dxgmms1 + 0 x 31065
    8eddcd28 91fdd3c9 69008 8443a50e 69008 dxgmms1 88 88 + 0xd8f0
    8eddcd3c 91fdd485 69008 00000000 88c09d48 dxgmms1 88 + 0x323c9
    88 69008 abfb2822 00000000 dxgmms1 8460cf5e 8eddcd50 + 0 x 32485
    8eddcd90 844b 4219 91fdd406 69008 00000000 nt 88 + 0x209f5e
    00000000 00000000 00000000 00000000 00000000 nt + 0xb1219

    STACK_COMMAND: .bugcheck; Ko
    FOLLOWUP_IP:
    nvlddmkm + 13eed8

    9153fed8?              ???
    SYMBOL_NAME: nvlddmkm + 13eed8
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    Nom_image: nvlddmkm.sys
    BUCKET_ID: WRONG_SYMBOLS
    Follow-up: MachineOwner
    ---------
    1: kd > g
    ^ No executable debuggees error in 'g '.

    Hello

    nvlddmkm.sys

    Seems Nvidia video drivers.

    Check with Nvidia Support, their drivers and documentation online and ask questions in the forums about known problems. Update video drivers. If there are no more recent ones it may be necessary to go back to an older stable version.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    --------------------------------------------------------------------------------------------------

    Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    We can analyze the minidumps if you make it available from the OneDrive or another file sharing of sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =========================================================

    BCCode: 117 0 x 00000117

    BCCode: 117 0 x 00000117<-- read="" this="">
    * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

    BCCode: 117 0 x 00000117<-- read="" this="">
    https://msdn.Microsoft.com/en-us/library/ff557271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

    Update the video driver - also look for the BIOS and the chipset drivers of low level from the system (motherboard manufacturer of custom systems) manufacturer.

    --------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

  • BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL with nvlddmkm.sys and ntoskrnl.exe

    Hey there,

    My computer has started planting since yesterday. I played a game for a while and it might or might not be related; Eitherway, it suddenly froze the system unexpectedly and I had to reset my pc. After that system started correctly. I ran the game again to see what's going on, and unfortunately, it crashed the system again; has had to reset hard once more. After that, I got a BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL score to nvlddmkm.sys. I tried to reboot once more to see if it disappears and the system charged up to the floating logo of W7, but I only got a black screen afterwards, no login screen either. I wasn't able to boot the system normally more, forcing me to use safe mode. After checking terrils, I decided to uninstall completely nvidia drivers and that helped - loaded correctly and installed system software of windows default driver.

    Right now I'm in a situation where Windows seems to work stable unless I have try re-installing the drivers nvidia; In doing so, does not load results in a system and the BSOD screen again after W7 logo, no matter how many times I restart.

    My basic features are:

    Gigabyte P35-DS3R

    Intel Core 2 Quad Q6600 (2.40 ghz, oc'ed to stable 3.20 ghz)
    8 GB DDR2 RAM
    Gigabyte Geforce GTX460 1 GB of RAM

    Samsung 840 EVO 120 GB

    ST1000DM003-1SB10C 1 TB

    Silentium VERO L1 600W

    W7 Pro SP1 with all latest updates

    Here are the dumps (contains the dump of the first and the last being).

    So far what I've done - tried unplugging all devices (including my Sound Blaster Tactic 3D Sigma headset), uninstalled Avast antivirus, tried reinstalling drivers nvidia in two different ways (of unsuccessfully); clean the GPU/CPU/power supply. I'm slowly running out of ideas. To add, I never really had problems with my PC - it works all the time for 8-9 years with no issues whatsoever and I moved from c2d e6750 and GTS250 a year (or more) there are what I currently; never had any problems with these components, either. I always intend to Exchange my gpu for further testing, but since I do not have an integrated GPU and video signal passes through GTX460, I don't really know if there is a damaged graphics card (perhaps wrong, however).

    If anyone knows what is the origin of the problem and what can be done to avoid a full system reinstall, I would be really grateful for any help.

    Update:

    I swapped the GTX460 with my old GTS250 for test. Apparently, it seems that the GTX460 was damaged and all misleading BSOD was actually caused by defective behavior. Fix to 750ti in a while.

    Edit [21/05/2016]:

    I swapped to 750ti and all is well again. This case can be considered resolved.

  • Blue screen after TDR nvlddmkm.sys

    Hi all

    Every day I get a followed of a BSOD nvlddmkm.sys TDR.  It occurs when suring the web, or by using excel, or even just after the start.  Have spent countless hours of research on this.  Here is my card and the DMP file.  Any help is greatly appreciated!  I am using EVGA GTX260 but used 9800GTX + and received the same error message.  I also tried all 195.62 to 257.21 drivers, do an uninstall of older drivers and the installation of new drivers in safe mode, driver Sweeper, etc. and even made several own OS installations.  I also modified the registry for graphic TDR to a second value 8.  I'm at a loss to know what to do now.  Sorry for the long post, but thanks in advance!

    Operating system: Win7 Ultimate 64-bit

    Card mother EVGA 780i with chipset drivers the most recent and BIOS P08

    Q9550 @ 2.83

    2 x EVGA GTX 260 1.75 GB in SLI.  Have tried every single-GPU, even when I used the 9800GTX +.

    4 x 2 GB Corsair XMS2 RAM.  Have tried exchanging sticks and using only 4 GB total.

    Matrox Triplehead2Go with 3 x 19 '' Acer monitors

    Xion 800w PSU

    2 x 1 TB WD HARD drive

    Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version

    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [C:\Windows\Minidump\062310-16754-01.dmp]

    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * C:\Symbols* http://msdl.microsoft.com/download/symbols

    Executable search path is:

    Windows 7 Kernel Version 7600 MP (4 procs) free x 64

    Product: WinNt, suite: TerminalServer SingleUserTS

    By: 7600.16539.amd64fre.win7_gdr.100226 - 1909

    Computer name:

    Kernel base = 0xfffff800' 02c 07000 PsLoadedModuleList = 0xfffff800'02e44e50

    The debugging session: Wed Jun 23 08:51:25.426 2010 (UTC - 04:00)

    System Uptime: 0 days 1:25:51.595

    Loading the kernel symbols

    ...............................................................

    ................................................................

    ...............................

    Loading user symbols

    Loading unloaded module list

    ......

    *******************************************************************************

    *                                                                             *

    * Bugcheck analysis *.

    *                                                                             *

    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Error checking 116, {fffffa800a4db4e0, fffff880105b5d00, ffffffffc000009a, 4}

    Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32

    WARNING: Unable to verify timestamp for nvlddmkm.sys

    ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

    Probably caused by: nvlddmkm.sys (nvlddmkm + 6eed00)

    Follow-up: MachineOwner

    ---------

    2: kd >! analyze - v

    *******************************************************************************

    *                                                                             *

    * Bugcheck analysis *.

    *                                                                             *

    *******************************************************************************

    VIDEO_TDR_FAILURE (116)

    Try to reset the display driver and recover from timeout failed.

    Arguments:

    Arg1: fffffa800a4db4e0, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).

    Arg2: fffff880105b5d00, the pointer in the responsible device driver module (owner tag).

    Arg3: ffffffffc000009a, optional error (NTSTATUS) of the last operation code failed.

    Arg4: 0000000000000004, optional internal context dependent data.

    Debugging information:

    ------------------

    FAULTING_IP:

    nvlddmkm + 6eed00

    fffff880'105b5d00 4883ec28 sub rsp, 28 h

    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

    CUSTOMER_CRASH_COUNT: 1

    BUGCHECK_STR: 0 X 116

    Nom_processus: System

    CURRENT_IRQL: 0

    STACK_TEXT:

    "fffff880 '0526db88 fffff880' 04b35ef8: 00000000 ' 00000116 '0a4db4e0 fffff880' fffffa80 105b5d00 ffffffff" c000009a: nt! KeBugCheckEx

    fffff880 '0526db90 fffff880' 04b 09867: fffff880'105b5d00 fffffa80 '0ae4e000 00000000 00000000' ffffffff' c000009a: dxgkrnl! TdrBugcheckOnTimeout + 0xec

    fffff880 '0526dbd0 fffff880' 04b35d07: fffffa80'ffffd87b ffffffff 'fffe7960 fffffa80' 0a4db4e0 00000000' 00000000: dxgkrnl! DXGADAPTER::reset + 0x2a3

    fffff880 '0526dc80 fffff880' 04a37ec1: fffffa80 '0a7392e0 00000000'00000080 00000000'00000000 fffffa80' 0adf5010: dxgkrnl! TdrResetFromTimeout + 0 x 23

    fffff880 '0526dd00 fffff800' 02f1ca86: 00000000' 02f5c473 fffffa80 ' 0ae6f770 fffffa80'0730 c 040 fffffa80 ' 0ae6f770: dxgmms1! VidSchiWorkerThread + 0 x 101

    fffff880 '0526dd40 fffff800' 02c55b06: fffff800'02df1e80 fffffa80 '0ae6f770 fffff800' 02dffc40 fffff880'01220534: nt! PspSystemThreadStartup + 0x5a

    fffff880 '0526dd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KxStartSystemThread + 0x16

    STACK_COMMAND: .bugcheck; Ko

    FOLLOWUP_IP:

    nvlddmkm + 6eed00

    fffff880'105b5d00 4883ec28 sub rsp, 28 h

    SYMBOL_NAME: nvlddmkm + 6eed00

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: nvlddmkm

    Nom_image: nvlddmkm.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 4c0d6fd7

    FAILURE_BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

    BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

    Follow-up: MachineOwner

    You got error checking 0 116 x which is a VIDEO_TDR_ERROR - "This indicates that an attempt to reset display driver and recover a timeout failed."
    Without doubt, update the video driver, downgrade the driver (if the last update does not work), or uninstall and reinstall the latest driver.  Updated the firmware, downgrade the firmware (if the last update does not work). Make sure that you use the latest BIOS for your motherboard as well.  If you are overclocking, stop.
    You have other video material, you can try?
    The last before the bugcheck error code was STATUS_INSUFFICIENT_RESOURCES (0xc000009a) - insufficient system resources exist to complete the API.
    It seems that some happening exhaustion of critical resources.  Unfortunately, it is difficult to determine what is depleted or which API is a failure.
    If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?
    Can you periodically check the Process Explorer'ssystem information window and note all values that seem to be increasing without limit?
    You can download the c:\windows\minidump on your SkyDrive content and provide a link?
  • 0x7e caused by nvlddmkm.sys BSOD

    Hi all, first of all, I give you my rig data:

    I7 950 4.07 GHz

    Sabertooth X 58

    X 2 GTX 580 SLI

    OC ZX Series 1000W

    6 GB DDR3 Kingstiom 2000 MHz

    Windows 7 x 64

    When I get a black screen with a 'trrrrrrr' background, I played Guild Wars 2. Unfortunately, the only way to fix this is to press the reset button :(

    I have a problem with versions 331.82 and 332.21 graphics drivers.

    I shared my Minidump file on my Skydrive.

    https://SkyDrive.live.com/redir?RESID=AAAA289BB7B5562E%21388

    THX and happy new year!

    Lukhas

    This phenomenon was related to nvlddmkm.sys nVidia Display Driver.  There is a known issue with the current driver (your own).  I would setup an older driver (older than 6 months, for example) until they release a less conductive buggy.

  • Windows 8 Pro - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys) - Blue Screen of Death

    Hello

    I get a blue screen with the following error: PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys). This happens whenever I start. My computer will be turned on and be normal for the first five minutes, and then all of a sudden, I get this error.

    The computer I use is that I built myself. Here are some features:
    MSI - card mother B75A-G43
    -Processor Core Intel i5-3570
    -RAM Kingston 8G
    The computer is running Windows 8 Pro with Media Center (32 bit). I'm also using AVG Internet Security.
    I have not installed new hardware recently and the only software I had installed before this error was Adobe Reader XL
    Any help would be great.
    Thank you
    Vince

    http://www.Avg.com/us-en/utilities AVG Remover, I would like firstly, uninstall AVG, restart the computer, and then run the AVG Remover and restart another.     Try to run a day or so... on the default windows Defender.     AVG can be reinstalled quite simple if this is not the cause.

    Typically when its saying Page fault in nonpaged area... makes me think it could be bad memory, or some installed program writing to the wrong places.    Remove 1 stick of 4 GB? and swap to test each?

Maybe you are looking for


HashFlare