page problem

Similar Questions

• new page problem - cannot insert image

  Using iMac OS X 10.11.3 (3.4 GHz Intel Core i5; 16GB) and Pages 5.6.1 (2562) - new problem: when I copy a .jpg image and use Edit Paste, or new message command-V since June 13, 2016, says 'The Image could not be inserted' - how can I return to work? I tried to change JPG to PDF - still without insert image.

  OS X 10.11.5 and v5.6.2 Pages have been available for some time. No reason that you have not updated to new versions?

  You do not specify if you do a copy/paste a Finder .jpg image, or an image of another open application - in Pages. I can tell you first hand that copy/paste a .jpg image file (or even drag and drop) from Finder works with Pages ' 09 v4.3 and v5.6.2 on OS X 10.11.5. There is no change of OS X or Pages on June 13, what else do you have to your computer (install the anti-virus software) or something else?

• HP Laserjet P1006 printing BLACK page problem

  Hi guys,.

  I install the drivers and works well... but when im printing a test page

  It prints black color on the entire bottom/page, but the content is readable with black fonts.

  Please help me to solve my problem.

  Please see printable sample below

  Thank you

  

  Hi WNSitmanila,

  This is a problem with the imaging in the toner cartridge drum not be cleaned properly. You will need to install a new toner cartridge into the printer to solve this problem.

  Is the cartridges that you use a new OEM or revised one?

• CP1525NW 2 sides print alignment Page problems

  Hi all.

  I recently "upgraded" color laserjet CP1215, in a CP1525NW.

  Many images color 2 faces (dvd booklet) removable, to print on 32lb Hammermill Color Laser glossy (using the Type of paper for HP Glossy presentation).

  Aside from the occasional minor skew, the old CP1215 was enough spot - one when he came 2-sided printing.

  The new CP1525NW... isn't.

  Now, the book images are technically landscape, but because the printer feeds the paper in a portrait orientation, I will be describing the portrait SEO problem.

  When printing images, they are set to be centered on the page.

  However, when it actually prints, the margin (the first edge coming out of the printer) superior of the printed side is clearly superior to the bottom margin.  So the images on each side do not align correctly... pretty much a difference 0.25 "or so.  Left and right margins seem perfect, give-or-take the usual teensy bit of obliquity.

  I printed more than enough to know that this alignment is 100% compatible, even on different types of paper and different software.

  It seems to me that he is clearly a hardware or driver problem.

  Possible workaround I tried turning one of my images before printing, so that I must return the orientation of page around before recharge of the sheet.  This actually fixes the alignment of up/down (and also just confirmed the consistency of the problem)... BUT... It also showed that the left/right alignment was not as centered as it appeared.  The difference does not seem to be * very * bigger than up and down, but is pretty close to the same thing.

  I tried to dig through the properties of the printer, the Toolbox... and I can't find anything that will allow me to adjust the alignment page...

  I was pleased with the quality of overall impression on this model, but if can't solve this alignment problem fairly quickly, this thing will eventually be returned to anything else.

  EDIT:

  Failed to include any other info on my system.

  This forum works on Windows XP SP3.

  The main source of print is Adobe Acrobat, but the problem occurs with everything I print since.

  After having worked with chat support technicians online this weekend thanks to this, I got an email today, which suggests that the use of the print driver PCL more-up-to-date, rather than specific to the model 1 + years driver universal, should solve the problem of alignment.

  Unfortunately, although I strongly suspect that this can indeed solve this problem, I was unable to confirm this.

  My specific situation really need a more immediate solution - as well as the availability of a decent policy hassle [back - I've already turned the printer on the place of purchase and exchanged for a product not HP that could meet the current needs.]

  That being said, I am still very fond of HP products, and I was very pleased with the overall quality of this specific printer, without the duplex alignment problem.

  I have no doubt that this printer will cross my path again in the near future.

• ICM Enterprise 7.0 requalification dynamic Web Page problem

  We just finished installation ICM 7.0 on our first customer site. After jumping over obstacles, we conducted today a problem with the new page of dynamic professional reorientation. It simply does not load. We tried to use http:///reskill, as well as https:///reskill. Or comes up with the page. WebView works perfectly and therefore the support tools. We checked that the Apache service is installed and running. Jaguar is installed and running. IIS is installed and running. We rebooted several times, re - run through the configuration and tried to go to the page on the server and several machines himself.

  If someone got the dynamic page of requalification for work, and if so, do you have tips for us?

  Thank you!

  The documented URL is actually incorrect, try using:

  https:///uiroot

  Please rate of messages.

  Andy - berbee

• BlackBerry Smartphones Blackberry Protect Web page problem

  I installed Blackberry Protect on my 9800 a few months ago.  I tested it by going to the web site from Blackberry.com/Protect by clicking on the link to the current location of the view.  This great worked as did all the other options on the page.

  Today I lost the phone home and decided to try the strong ring feature and I'm having a problem.  It seems that by clicking on ONE of the options (view location, strong ring, display a Message) will cause the computer screen go dim and a timer starts turning in the center of the page containing the word Loading... beside him.  Now, it has been so for about 30 minutes, with no sign of ever stopping.

  I found my phone at the same time, but it raises the question of what is happening with the web page?  I don't me remember the last time I tried that there was a problem with a long timeout.  The page does not show my phone correctly and identifies by my phone number, so it isn't a problem with not recognized.

  Any ideas what is happening or how to fix this?  The app is pretty useless without it.

  Mode of compatibility in Internet Explorer v9 solved the problem.

• Region of the ADF - JSFF in JSPX Page problem

  Hello world!

  I use JDeveloper 11.1.1.7 and working on ADF

  I have an area on my jspx page. For this, I created a page jspx and a workflow bounded for the region. Bounded task flows has a view and a jsff page.  I dragged and has decreased the flow of work to make the region to jspx page and selected the region. It is looking without problem.

  But I throw jspx page, page works fine with other components. Does not display only the region jspx on page.

  How can I solve this problem?

  Thank you.

  Hello

  If you use the ADF security you config the taskflow with security as well. If you don't use ADF security then you can create a new page and only add the taskflow as a region and see if it works fine in there.

  Concerning

• Web page problems

  I edited a webpage in Dreamweaver 8 on Mac as well as the changes appear on Safari and Google Chrome. However when I open the Web page in Mozilla Firefox, the changes I made do not display upwards for example in the sidebar, there is whitespace between the tabs even if I already edited the tabs on Dreamweaver.

  If this problem can be solved or is it a problem with the incompatibility of Dreamweaver with Mozilla Firefox?

  Refresh your browser (Ctrl + R or F5).

  In some cases, it should be clear the cache memory of your browser.

  Go to tools > Options > advanced > network.

  Caching Web content: click on the "Clear now" button

  Nancy O.

• master page problem

  I begin barely using Muse on my iMac and I saw a bunch of tutorials. A couple of things already I have followed with great interest and that they work, but one real big problem is this: I created a bunch of buttons psd with the functional States to link to a registration form and social networks. They are all on the master page (I'm only using a master page to date). On my home page, I made a series of images with text scrolling superimposed to scroll at a faster speed. Looks awesome. Problem is the buttons that are found on all the main pages because they are on the master page moved to a different location on the home page. They still work, but they are in the wrong place. I can't select them. On the master page, they are always in the right position. Any ideas please? I tried to quit and reload.

  Unless the content is included in the page footer area in master, do not change location. Make sure that there are no used html embed, if so then remove it and then check.

  If everything is fine also same issue, then please post a few screenshots of the page master and the homepage in design so listen to excerpts and links to the live site.

  Thank you

  Sanjit

• Integrated HTML Page problem!

  Hi all

  I'm kinda new to Muse CC but I am facing a problem that I can't seem to cross.  I joined a Web page by using the function "insert HTML code."  This all works fine but I need side pieces "cover up" of this embedded Web page. However any object I place on the embedded HTML code just disappears when displayed in preview mode.

  The image attached to this question shows what I essentially seeks to achieve - but can't!

  Can someone point me in the right direction?

  Thank you!

  Chris

  

  You want to "hide" an iframe? A solution is to use a new layer and put everything that blocks the iframe on this layer... read from top to bottom layers so everything above will cover whats below.

  simple example = string

  

• Front Page problems

  Help, please. I am new to using muse and I have the worst problems with a first page of a Web site. All these sites are great, but the front page has a slide show. On my computer (mac) and another pc, it seems good, but as soon as my client open things change!

  This is a screenshot of the page on my computer.

  

  ... and this is what it looks like on my client computer and here is his comments:

  
  

  The squares are the right size now but the image still grown and cut the bottom of the image and the upper part has a lot of extra room.  If I Zoom, it makes it worse and even if I have to zoom out.

  
  

  

  
  

  Here is the link for all the document cover page (I removed the links. Any ideas why this happens? Help, please!

  
  

  http://bristleconetrail.businesscatalyst.com/index.html

  I'm not able to reproduce with several systems, I think it is because the resolution that your client will use.

  Please let us know the details with resolution that your client will use.

  Thank you

  Sanjit

• 20141 with several publications on page problem

  Since the update, I am unable to get several compositions to work on the same page. I use the configuration described here: http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html#multiplecompositions

  For some reason, only the first animation, I give the floor to AdobeEdge.loadComposition load at all. The rest do not load and there is no error message. Here is my configuration file .html:

  <! - execution of adobe Edge - >

  < meta http-equiv = "X-UA-Compatible" content = "IE = Edge" >

  < script type = "text/javascript" charset = "utf-8"src="/_js/edge/edge_includes/edge.5.0.0.min.js" > < / script > "."

  <! - load animations - >

  < style >

  .edgeLoad-EDGE-235976427 {visibility: hidden ;}}

  .edgeLoad-EDGE-124716880 {visibility: hidden ;}}

  .edgeLoad-EDGE-124716881 {visibility: hidden ;}}

  < / style >

  < script >

  AdobeEdge.loadComposition ('/ portable/edge/_js ', 'EDGE-235976427', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: '671. "

  height: '441 '.

  }, {« dom » : []}, {« dom":[]}) ;

  AdobeEdge.loadComposition ('/ _js/dashboard/about ', 'EDGE-124716880', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: "1010."

  height: "590".

  }, {« dom » : []}, {« dom":[]}) ;

  AdobeEdge.loadComposition ('/ _js/edge/personalizedcontent ', 'EDGE-124716881', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: "1010."

  height: "590".

  }, {« dom » : []}, {« dom":[]}) ;

  < /script >

  <! - end of Runtime adobe Edge - >

  < div id = "Stage-laptop" class = "EDGE-235976427" > < / div >

  < div id = "stage-in respect of" class = "EDGE-124716880" > < / div >

  < div id = 'Stage-customize' class = "EDGE-124716881" > < / div >

  I shared a sample @ Dropbox - multipleComps.zip which is created in 20141 CC. You can use it for reference.

  The actual compositions of loading a different folder is now easier. Assuming that your real compositions are under a folder called mycomps, you can replace the call to loadComposition in htmlRoot parameter as follows:

  AdobeEdge.loadComposition ('comp1', 'EDGE-1814210607', {scaleToFit: "none", centerStage: "both", bScaleToParent: true, htmlRoot: "mycomps /"}, {"dom": []}, {"dom" :[]});)

  Let us know if you are still having problems with this.

  DIA-

• Only half page - problem in Internet Explorer

  Hi all
  
  I have a page being opened in my main application in a new window, almost like a popup. The page seems to be made entirely, as in the xml code is all there for the components.
  
  The problem is that only half of the page is displayed by the browser. Halfway the window remains my page is simply cut off. You can even click around and use components that are supposed to be there, so its fully functional but half of the content is simply invisible / is not properly displayed by IE.
  
  This "popup window" works as expected in other browsers. Also, play with the size of our panels and containers does not appear to have an effect. Have you all seen a problem like this for specifically Adf in specific browsers? How can I determine if it is manipulation of EI to part that causes this, or something else entirely?
  
  Appreciate any advice! Thank you.

  That's the problem with the way you have laid out the component. Best way is, border with colors and see how it gets returned, which would give you an idea on what to the difficulty. Then, see if you have all your components under a stretch throw or if not a group panel layout with layout as book. Maybe this would help.

  Good luck!

• Horizontal sliding composition on the master page problem

  Hello.

  I have a menu made starting from a horizontal scroll publication in my mobile site's master page.

  Here it is inactive on the left and Active in the right (in gray)

  

  The problem is this: when it is idle (as shown below) I can't click on anything whatsoever "below.

  So, for example, here is the page of Services with the main menu at the top right. Even if the menu is not active I can not click on the link text "Learn more" below.

  Another example: I can't slide through the images on the slideshow MSJ drilling on the work page.

  

  I would like to keep the effect of horizontal slip but don't know how to resolve this...

  Thank you very much

  Ben

  Unfortunately using this specific widget will not work. The reason is that, even if you don't see the background of the "Closed" box, it is always there, that's why you can't score anything below.

  You must use the panels/accordion Widget, because this will push the image down or overlay on top of the background.

• The ADF Login page problem

  Hi all
  I developed an ADF application with the OPSS-based login page, I am facing a strange behavior in the login page, I type user and pwd and click on the "connect" button but instead of redirection in the next page, the login page is updated and I have to re-enter my credentials. This happens, two, three times (random is) so I'm able to have access.
  What can be the problem?
  
  
  THK in advance
  L-

  We use the ADF security and we faced the similar problem three weeks ago. This problem occurred only in Internet Explorer.
  After that we contacted the support of oracle, they confirmed that it is a bug.

• Dreamweaver cs5 page problem

  Hello, I have this problem. Have a page called code HTML also written index.html.In < a href = "index.html" > HOME < /a >
  When put the cursor on the 'HOME' link in Dreamweaver, it is also said, that this page is index.html.
  But when I check with the browser, the "HOME" link is called main.html, and of course, there is nothing in it! Why is this?
  I remember correctly, rename it once my index.html main.html, purpose, then I have once renamed it to index.html. There nowhere nothing written on the code of main.html, the said index.html, why does the browser see the main.html?
  Help, please

  Spent about 8 minutes looking for search tool I found a link checker. It showed that I had 3 broken links. It was the pages, which opened correctly, I don't know how they affected index.html.So comes to delete these 3 pages, created new ones. Now, everything's fine. Thank you for your help