Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

Similar Questions

• Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

  The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

  I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.

• When the update fails and I get an error message 80070663 how to proceed?

  I have windows vista home premium and when I try to download my security updates fails and I get the 80070663 error message and it does not allow me to get my updates. all of the suggestions. Thank you

  This error means that one or more of the registry entries that are listed in the following table are missing from the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage registry subkey. For more information about this error code and how to fix this, please visit this link below.

  http://support.Microsoft.com/kb/913754

• Windows media player has completely disappeared from my computer. I can't find even in programs

  I have a Vista program. When I did the updates and things may have changed, my Windows media player has completely disappeared from my computer. I can't find even in programs. What can I do?

  Hello

  You can navigate to C:\Program Files\Windows Media Player and check if the wmplayer file is listed. If it is there, and then create a shortcut on the desktop or right-click on "wmplayer" and chose "Pin to start menu" and check if it helps.

  Hope this information is useful.

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• Disk defragmentation has completely disappeared

  Original title: I run Windows Vista and disk defragmentation has disappeared completely. I used the search but unable to find it. Can you tell me how to get it back
  Disk defragmentation has completely disappeared from my computer. I did research for it but no luck. Can you tell me how it could have disappeared and how can I get it back

  Check if defrag is disabled in computer management services.

• My window of export in LR4 has completely disappeared. Help?

  Working fine until tonight... the window export completely disappeared. I installed the update to 4.2, no luck. Restarted the computer, nothing. Uninstalled LR completely and re-installed, still nothing. Does anyone else have this problem? I can't display the window with the options with regard to exports, it is impossible.

  You are already working with a second monitor?  This is usually the result of dialog last export being used on a (now offline) another monitor.

  If the web Weaver suggestion does not work, try trashing preferences eferences-file http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1148/198/how-do-i-supprimer-the-lightroom-pr

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• [8510w] system shuts down / is not start when the card is inserted

  Hello
  my old 8510w developed a bad thing - when the power cord is inserted, system will shut down. Works fine on battery.
  Symptoms:

  1. stops when the power cord is inserted;
  2. does not start then on the power supply;
  3. charge led flashes in unusual ways - led is quite low, but gets a little more brilliant ca once per second;
  4. power led lights also dimmed down mode.

  I tried another adapter as well, so that should be good. I would like to know if this problem is known and could be repaired (quite easily), or there is no point to this end by like old computer as 8510w.

  -------------------------------
  8510w
  Debian Wheezy / Win7

  Measure the output voltage of the AC adapter does not prevent the failure of adapter to even the slightest charge.

  If the laptop will not start even with an identical power adapter connected and remove the battery, then it is very likely that the electric distribution/charging circuit on the map system of the laptop has a faulty component.  If you're a troubleshoting capableof until the component level and bulbs to solder you can fix the system board. Most people choose to replace the motherboard or laptop.

• Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.2.1.537
  OS version: 10.2.1.1925
  Carrier: Beeline (KZ)

  Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

  Tried to activate or disable this setting, the result:

  On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

  Off - 1 min 17 sec

  What is the problem of the time difference?

  Good, thanks

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• How to set up so that VMs automatically starts when the host reboot?

  We lost power this morning and all 4 ESX hosts are down.  When the power is back, we observe that VM is not started automatically.

  We find we have not enabled 'start and stop Virtual Machines with the system.  In this way, we have allowed it.

  We'd like to know, is it necessary to move all virtual machines (those we would like to bring start automatically when the host is in place) "Manual start" to "any order"?

  In addition, as the setting is on each ESX host, will be the setting (i.e. automatic start in any order) for a particular virtual machine carried over to another ESX host if it is has been vMotioned?

  Thank you

  (1) Yes, it applies for each host and is not shared between all the other hosts and is disabled by default. You must activate it by going to configuration tab look for 'Machine virtual start/stop' to activate and set the priority/delay for your virtual machines

  (2) personally, I don't use this feature, it could be the case that the default update the settings back... it would be surprising if that were the case, I re - activate and try to stop or restart and see if that is the case. If it's the latter, I would file a ticket with VMware if you have a support contract

  (3) No, if everything is configured correctly and the change of the start/stop is retained through reboots, they should automatically turn on virtual machines in the list that you specified.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie