Pages stops and freezes computer

Similar Questions

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• Pages stopped and will not start again?

  I was working in pages on my macbook Pro and all of a sudden it stopped. Normally pages start to the top, but this time it didn't. I removed and installed the app pages yet, but it still does not work. Can someone help me?

  Thank you

  Miranda

  What specific version of Pages with Mac OS X you are running our MacBook Pro?

  Open pages from others, or not successfully documents?

• Satellite Pro A200 (PSAF4A) - HARD drive stops and the computer crashes

  Hello

  It's my first post in this forum, but certainly not my first issue

  I recently had to re - install Windows Vista on my laptop because I had an undetectable virus that attacked Windows and made him useless.
  Before that, I had many, many startup errors and windows crashes, but which were preventable or fixable. After the re - install, I noticed that windows stability was much better until recently.

  I have not changed the settings or anything what so ever on my computer laptop which could affect the performance somehow, but I have a new problem.

  If I have my computer running, performing tasks of base for a few hours I notice that performance and all of a sudden my computer completely stops responding.
  The disk shows no signs of life after this point, and his only solution is a "disruptive Shutdown.
  This appears in the reliability monitor and performance that all this, there is no input error, and nothing is done after.

  I also noticed if either windows defender or other my antivirus runs a system scan that my performance is reduced to the point where I can't run a simple task like opening an Explorer window. This also translates to total non-response. This never happened before a week ago and now it happens every time.

  These two started within the past few days and there is no clear reasoning behind it. My inactivity of the processor is always the same, no new processors added and no settings changed.

  This could be a problem with Windows, my HARD drive, my CPU or something worse?

  Is there a reason why is happening and is there a solution either of these problems?

  First of all, you reinstall Windows with the Toshiba recovery disc or disc of Microsoft?

  It's strange and not easy to say what's wrong, but in your case I would test the RAM and HARD drive.

  There are special tools to test the following:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  http://Memtest86.com/

  On the two Web site, you can download a CD image. Burn it to a CD, start with him and then you can test parts.

  Good luck!

• Adobe Premiere using 99% of memory and freezing computer

  Hey all,.

  I encountered a problem with Adobe Premiere use almost all of my computers from active memory. I use first very well for about two months and was in the middle of editing a video of 5 minutes. Usually, when I'm editing, in the Task Manager, he said I use about 4 k Mo of memory. Now all of the sudden opening of this project, I use 12 k Mo of memory. The project is delayed, stops responding and hangs my computer. I don't know what caused it. I have a laptop ASUS game that is more than capable of dealing with this software and it worked perfectly. Something to note is that all this happened last Friday, after that I updated the first. Any help finding this would be really appreciated!

  Processor	2.6 GHz Core i7 6700HQ
  RAM	16 GB DDR4 SDRAM MEMORY
  Speed of memory	2133 MHz
  Hard drive	Drive HARD 1 TB + NVMe
  Graphics coprocessor	GTX970M 3GB GDDR5 NVIDIA

  Jim Simon mentioned in another thread as a known problem. No matter who he knows in OS X, or is this windows-only so far?

• Windows Installer opens and freezes computer XP

  Whenever I connect internet or even when I'm on the internet and do right click to go to another place, Windows Installer appears and everything crashes constantly.

  * original title - windows xp. Installer Windows popping up Guard *.

  Hi Marianne,.

  It is possible that your Windows Installer service is damaged and must be repaired. You can follow the steps described in the following article for instruction on how to repair service:
  http://support.Microsoft.com/kb/315353
  I hope this helps.

• Create a Page item: stop and start the HTML Table presentation - location?

  Where is the "Create Item-> stop and start HTML Table Layout Page" located at? I can't find it.

  kilo1-1 wrote:
  Where the "create point Page--> stop and start HTML layout table" is located at? I can't find it.

  4.2 elements 'Stop and start in HTML table' are replaced by setting new Start grid in grid presentation properties of each element.

  (Please always indicate which version APEX your question relates to.)

• Stops randomly freezes

  I am experiencing random stops and freezes when using the Internet, or when in a document. Also sometimes I get a boot error, Startup Repair tries to fix problem and fails.

  PAM

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Virus scan Avira would stop working and freeze the computer whenever an analysis was carried out. Tried to uninstall and reinstall, but still had the same problem. Impossible to uninstall now due CCPLG. XML error.

  Hello, I have been using Avira anti-virus on my computer for the past two years with no problems.  I run a scan on my computer every day and noticed problems with it a few days ago.  The analysis would be about 21% when he would stop scanning and freeze my computer.  The RAM would be also be maxed out at 100%, and I need to restart the computer manually.  When I ran the scan in safe mode, it worked fine, but then continued to not work when the computer is not in safe mode.  I would also get a security alert Windows telling me that Windows did not antivirus software on this computer.  I tried to do a system restore which goes back to the day before the problem started to happen with the scan, but I still have the same problem.  I tried to uninstall the program again, but I get the message: Setup could not determine feature control file, or was not able to read it properly the. I also received a message about CCPLG. XML. I don't know what to do at this point or what was wrong in the first place with my antivurus software, but I feel that I continue to do worse with everything I want to do about it.  If you can offer any help with this problem, it would be much appreciated.  I have to go to work now, so I'll check tomorrow and hope that someone decided to go back to me.  Thank you.

  There are similar problems listed in the Forums of Avira.

  Have a read of the info in them; who can help you:

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=77368

  http://Forum.Avira.de/WBB/index.php?page=thread&PostID=729964

  Both above the Avira Forum entries have the same problem, CCPLG. XML, like you with solutions provided.

  http://www.Avira.com/en/support/kbdetails.php?ID=135

  Avira has also a manual uninstall. read the link above.
  Try this: uninstall/reinstall Avira as it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:http://www.avira.com/en/support/

  Contact the Avira Support on this problem with their anti-virus software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, try asking the security of Vista and the Privacy Forum.

  They know a little about the Avira software there.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP crashes and freezes. I receive Stop errors that say I can't restore the computer.

  I have a Windows xp that fails and frequently freezes when I restart my computer, it says it was a stop error that I can not restore the computer because its been there for months and I don't know when to return to I'm pretty certain that it was a virus, but whenever I go to scan the computer , it crashes can anyone help me with this problem?
  original title: help with freezes and freezes

  Hello
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• my computer guard stop and start then I am browsing

  I have windows 7 installed in my computer. I'm not very tech savvy and don't know why, but the computer continues to stop and then hesitating and eventually go back to the top while I am browsing through Facebook or other Web sites. The computer is not shut down it's just sort of freezes. Also, I got messages saying that "pages do not react. I tried troubleshooting from my control panel and it worked once. It detected the problem corrected, and my computer was quick again. Now, it's back to frost up and such. I tried to resolve yet and that is to say 'no problem not detected '. This is why I post here. Again, I am not tech savvy so I have no idea what to do.  The other time the computer (when I did the first troubleshooting), I first called my cable company where I have my modem and wifi. Everything on their end was perfect. No problem there.  They suggested I have delete my browsing history. I did it. Nothing. It's still (once again) slowing down, freezing and eventually go back to the top.

  Any help in this matter is greatly appreciated!

  In addition, if the problem persists try a "clean boot" and see if that solves the problem:

  https://support.Microsoft.com/kb/929135?WA=wsignin1.0

  If a clean boot helps there are other measures in the article trying to find out what is causing the problem and then you could return to a normal startup.

• Computer guard stop and causing the blue screen Error Message

  With the help of a Dell Vostro 200 with Windows XP Professional.  Suddenly, after you have moved the computer from one office to the next, she regularly stops and we get this blue screen that says:

  Technical information:

  STOP: 0X000000D1 (0 X 00000060, 0XAA2AD341, 0000002 0 X, 0 X 0000000)

  WUSB54gcv3.sys - address AA1AD341 base at AA15B000, Datestamp 48 b 66753
  Beginning physical memory dump
  Total physical memory dump
  For more assistance, contact your administrator or technical support group.

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  Drive_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this Stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure any new hardware or software is installed correctly.  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If the problem persists, disable any newly installed hardware or software, disable memory options such as caching or shadowing the BIOS.  If you need to use Mode safe mode to remove or disable components of your computer restarts, press F8 to select advanced startup options, and then select Safe Mode.

  Can anyone help?  I installed an update of the necessary BIOS and that did not help and the computer is configured to have Windows Installer automatically what is updated, it needs.

  Thank you.

  Pages 29 and 30

  http://support.Dell.com/support/eDOCS/systems/ins9300/en/OM/om_en.PDF

  Hope this helps, Gerry Cornell

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• When a close the lid of my portable computer Windows Media Player stops, and when I open it, it picks up.

  When a close the lid of my computer laptop wmp stops and when I open it, it resumes. This only happens on the battery. I have it set to not sleep, and there is no screen saver. I want to use my cell phone as an mp3 player without having to leave the lid open. is there anyway to prevent a break?

  original title: WMP stops when the lid is closed

  Open Power Options - you can do it from the control panel by typing Power Options in the start menu, or by right click on the battery icon in your system tray (right end of the taskbar.)
  Click on "change plan settings" for your current power management.  On the next page, click "Change advanced power settings".  On the box that opens, expand 'Power buttons and lid', then 'action close cover.'  Change the selection to "on battery" to the 'status quo', and then click OK.  Close the power Plan window.

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]