Palm Pre battering icon

Should I worry that my battery icon went from green to gray?  He is currently 72% charged.

The icon goes from green to gray about 90%.  You'll notice the opposite effect (grey green) during the load beyond this threshold.

Tags: HP Tablets

Similar Questions

  • Palm Pre - cable USB disconnect annoying message

    Whenever I have my my Palm Pre USB cable, I get the "data has been corrupted, but was retrieved. Always take out your phone from your desktop computer before disconnecting"a message.

    I get this even if I unplugged first using the icon 'Remove hardware safely' in my taskbar, to "Remove USB mass storage device".

    All had experience of the world, and you have a suggestion about how this message can be deleted?  Or is this a bug with the current Palm OS 1.02?

    You need to go to my computer and looking for Palm Pre as a hard drive. Right click and select eject and you stop trying to get this message.

  • Palm Pre won't Charge / turn on

    Heres is my problem. My palm pre battery when it is plugged in to recharge (with charger official palm pre, power supply) needed to DUMP when it's plugged in. I thought it could have been just a connection sometimes losing since sometimes charged and discharged. Shortly after this discharge started, I got it for free because I would have rather had a battery in any life. At the end of the day, my battery is completely dead and phone turns off. Not much, right? I'll come right home and put it on charge. Well, not so simple. When my phone support (with the charger official pre, tried in the sector, have tried in the laptop, have used 3rd party chargers) all I get is the battery charging icon. This is the red bar at the bottom with the lightning symbol on. I've tried everything. I cleaned up the phones to the compressed air connection, I took out battery for all-day to try, but nothing. My pre remains on this all day and dosent turn, once unplugged it shuts down. Could someone help me please? I can't take it on 02 since brought off the coast of a friend who have never experienced this problem, and it dosent have more paperwork to 02. is my phone broken? are there solutions? Thanks for help in advance. Craig

    I don't know if I can be of any assistance on this.  I think you should try webOS Doctor.  It is a program that reinstalls the webOS on your phone.  It could be that webOS has corrupted itself and must be reinstalled.  It's the only thing I can think of now.  If a webOS Doctor does not so I think that your problem is more serious than just a malfunction or software battery problem.

    Get the webOS Doctor here: http://ws.hpwebos.com/webosdoctor/sorry.htm

    You'll need your phone S/N from here (or take the back cover): https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface

  • How to change the voicemail number Palm Pre (Bell Mobility)?

    Hi all...

    I wonder if someone has found a way to change/edit the phone number of voicemail by default on the Palm Pre. When I touch to listen to my voicemail on my pre, it dials my phone number (instead of composing the Bell number requires me to dial which is #902393xxxx pp then my password digital - note the # beforehand), which comes in turn allows me to leave a new message for me.

    I talked to Palm support and they told me that my phone is setup and working correctly and it must be a problem with my service provider. I've been a happy Bell customer for 10 years or more and I am sure that my voicemail works well... Just to be sure I contacted support Bell and they assured me that I have to dial sign # in front of my 10-digit number, then my password to access my voicemail.

    I know I could just program an another SpeedDial to accomplish this task, however, I can't believe that there is no way to use this function as expected?

    Thoughts?

    Thank you...

    Well Yes, it's gets me too. I'll speak to a Bell representative tomorrow, but is this the silver bullet...

    Create a contact in your address book called voicemail

    Then you enter the number you need. I found the # key registers correctly.

    For a sweet break (2 seconds, no prompt) use the letter 't'

    to pause farm (a prompt will appear on the dial to press a key to continue dialing pad) use the letter 'p '.

    That should do it.

    I went a step further. And if you're not too nervous about to search your phone (and if you have time) I made a few changes that did get to voicemail even easier than pulling the top of the dial pad. Slight caveat about this, it is really involved, may be too involved for you, but it made me love what you can do with the Pre

    I went to the Central meadow, I configured my pre for Homebrew applications (not too hard, and had to do it on a computer with XP, it did not Win 7) I downloaded a homebrew application called launch pad (Super easy, done right the phone). I created my voicemail number to be an icon in the launch area. THEN, and this is the super cool part. I touch AND HOLD on one of the icons in the launch at the bottom of the screen until there is a ripple around her. I drag it to the launch area to take him out of the launch bar. Then I reach and grab the voicemail icon, until the ripple and drag it in the launch, and PRESTO, I have a button to access my voicemail.

    Again, I understand that this process may be too involved for you. But with a little sniffing around, I was able to add my voicemail on the launch I can access any program at any time.

    Yes I think Palm should do a better job with documentation. Their new philosophy that people don't want uninvolved help or manual files is silent. BUT I liked the fact that with a little work, you can do MUCH more functional phone. We would have to do the work? No, but I have a good feeling that Palm will impliment better functionality as time passes. They have always in the past. And until that happens, there are a few tweeks that can help until this happens.

    Love the pre so far...

  • For the HP Palm Pre 2

    Hello

    I use palm pre 2, I had the problem recently after reset it...

    It not Signin and messeging 'it is perhaps because of the low network coverage or the setting of the phone to your SIM card must be entered manually.

    now, I do this (IDEA using SIM-India) manuallly but it does not work.

    Please suggest me a solution...!

    Hello and welcome to the HP support community.

    As it has been explained several CIHI, several times in the number of threads, webOS servers have been closed.  No profile of webOS more.  No more backup.  No more App Catalog.

    There are some discussions 'stickied' at the top of this forum discuss this.  Try it, which includes links to articles on bypassing the webOS servers.

  • Printing from Palm Pre

    Announcement 'Happy Baby' shows print from a Palm Pre for a printer, but the site has no indication of what is required (next to a HP x).  There is a link to the website of Palm (now owned by HP), but nothing on this site.

    Can someone explain.

    ePrint work on a Palm Pre, like any other connected device internet.  Add an attachment to an e-mail message addressed to your HP printer connected to the Web and press send.  For more information or how to find the email address of your printer connected to the Web, please see HP ePrintCenteror ePrint FAQ.

  • Palm Pre cannot do timed Pause or break closes in a dial string. (e.g. online access to the Conference; Access voicemail; NBR of 10 digits, pause, spindle)

    I called Palm support who told me to use commas for 1 second pauses, even if this was not documented any where ever I could find. After thanking them and hanging up I tried. It does not work. Commas are deleted as soon as you click DONE to save the changes. I called Palm, with the same number of tickets, and they have reproduced the problem. 18 hours later (as promised), they called back to say there is no work around, but software engineering focuses on this offer in a future update.

    Now, I can not access voicemail (1) Office, with House (2) answering machine, voice conference lines (4) (3) cable phone that requires entry of a PIN; (5) launching my own conference for others to compose in bridge.

    Those are often used while I'm driving (auto speed) 1 access key to an integrated chain of 24 characters with 2 breaks is a huge requirement for safety and convenience.

    This will be a major issue for the business users and the fix should be in the next push of software. This cannot be considered a new feature request, it's a bug. Even in charge think commas should work. This seems to be a mistake to design and test.

    [Later note: Although there is an open ticket to Palm, I have also posted here in the hope others would chime if this feature is important to them.] Visibility + Votes = pressure + interest = fixed sooner?  ]

    Features of technology of the Palm Pre are works perfectly for me. I don't know how something this basis exceeded the testers.

    Have you tried 'P' for break?

    Just curious...

  • Palm pre more (Verizon) does not connect to the Exchange Server

    I've been on the phone for 3 days (bought the Verizon Pre the day it came out) and couldn't connect to my companys mail server. I had a Palm Treo 755 for years and have always got my email to that. After days of talk with representatives of the Palm, I am told that no. Verizon Pre is able to connect to a server to exchange corp at this time. I'm quite upset hereby, since after listening to a Council of representatives of Palm, I've had a computer scientist to ensure that our server was updated, we had the correct certificates, etc. This of course took hours to complete, and the person of COMPUTING time is not cheap. So afte spend all that time and money dealing with this, I learned today by a supervisor at Palm that ANYBODY on Verizons network is able to connect to their mail corp server and that it was an issue that is discussed in.

    I searched the forums and found a lot of this Sprint service problems, but didn't find any with Verizon. Anyone else out there on Verizon and unable to connect? Or maybe the better question is, someone out there have a pre with Verizon and IS able to connect to their server Exchange (EAS)?

    Correction to my last post. After doing a reset on my phone and update of our server, I was able to connect to my email. Thank you for your comments update to SP2. Overall, I am still very upset over the phone support provided Palm. As I mentioned before, I brought to the SP2 SP1 vs option several times by phone and I said whenever it was not the question. Even my computer, have fought a little, to get this update since that he had heard the same information I did representatives of the Palm on the phone. After you have created an account on here and PDAguy pointing me to the long thread about people having a similar problem, I showed it to our it guy and he has fortunately upgraded our server to SP2.

    I'm happy to get this issue resolved, but feel still Palm mislead me along the way, probably cost me over $ 400 in IT supports, lost my time and traveling in a Verizon store to swap a perfectly good phone and I try the different options which should not be fooled. I did 3 different calls to Palm (with my COMPUTER technician who has been paid by the hour) and each call lasts about 1 to 1-1/2 hrs. Most of the current time on hold any 'research' rep my question.  Even had a representative on the phone to me lie and tell me that he was able to connect to our server (using my info) with a meadow he had with him. He told me so I had a defective phone, and I was directed to return to Verizon to switch the phone outside. After I had passed the phone out, and of course, it doesn't work, I was then told by another representative of Palm and his superior that it was a known issue and that person is with Verizon was able to connect to a server (with a pre) because of a software problem on the phone. I got a refund from Verizon to get this phone for $149, but with all my time lost, the cost of my computer and the lack of knowledge by representatives of Palm, I think I have probably the most expensive Palm Pre Plus there.

    Message edited by tjp2176 on 01/28/2010 20:03

  • Call on Palm Pre

    Help from Palm Pre:

    "

    Forward calls

    Note Depending on your wireless service provider, your phone can be without this feature. Check with your ISP wireless on the availability and pricing of calls rerouted; extra charges may apply.

    You can transfer calls to another phone number.

    1. Open the phone.
    2. Open the Application menu and click on Preferences.
    3. In the calls, the value or both of the following:
      • Call forwarding: Press on or off.
      • Enter the call number to the front: enter the number you want to forward calls to. Click to edit an existing number.
    "

    Sprint does not have this - am I missing something?  Looks like him you wish because they charge per minute for this feature.

    Simply dial * 72NPANXXNNNN (area code, Exchange, number) to start the transfer. * 720 to stop.

  • Multi-task on Palm Pre does not work

    Hi all

    I was under the impression that it was possible on the Palm Pre multitasking.

    When I start a spring Radio channel and launch a different application of the radio channel stops - unfortunately.

    No idea what's wrong here? Of course, a radio app should be able to run in the background.

    Thank you!

    Sapag

    Hello Sapag and thanks for posting...

    When Sprint TV's request was written, the multi tasking was not enabled on the application itself.  This is partly by design.  Radio and video streaming strongly uses the battery.  In addition, the deployment of the device limited the amount of time developers had to tweek the current application for the Pre.  Remember, this is the first true multi-tasking OS for a mobile device.  As time passes, additional patches will be correct and/or add functionality to the device and apps built into the ROM.

    Thanks for the comments and keep the questions coming...

    Thank you

    Colapop

  • Palm Pre issues I'm having.

    I used facebook to add friends to my contact list on my new Palm Pre today. My father didn't is not on Facebook so I had to break his info into my phone on my contact list... not much. When I added his home address, the pre for some reason any linked my facebook account to my contact information for dads. Putting my info in my dads contacts. There is no way to erase it. He said that when I try to delete contacts that I would have to delete all Facebook contacts. ID rather not start over... (frustrated) :/

    This really needs to be fixed quickly! I read the other fourms, and many people have simular problems.

    Palm please provide a way to delete a contact that is downloaded from Facebook, or Outlook. without having to delete all my contacts and start all over again. It's really * beep * boring!

    If anyone has any advice please help

    All you have to do is to separate the 2 profiles. Click the Contact in your contacts directory. And then on info here page click on name there at the top. Then it should show both the profiles, click on one and an option is to disassociate the profile, you can also remove the profile from here or do a primary profile. I had a couple do this to me as well, according to the names of people like my brother and the father having the same names. The fact to separate their fixed.

    "Palm, please find a way to delete a contact that is uploaded on Facebook or Outlook." without having to delete all my contacts and start all over again. It's really * beep * boring! »

    As far as I know Facebook is the only one you can't remove it from. You cannot delete the one your talking together is because its connected to facebook. In this menu, as I said above, you can then remove, or break the link to the facebook no one. I agree on wanting to not have all or nothing with facebook. There are a lot of people I just don't want or need it info in my contacts.

    You can delete the others without having to start all over again.

    Message edited by tagz on 09/06/2009 18:37

  • Google Contacts do not appear to sync or not all download on my Palm Pre contacts

    UPDATE (with solution):

    @darqmatter noted:

    No amount of purging of contacts has worked for me. I had to remove all instances of contacts with special characters in names (I had 3 symbol #). After that, and 10 minutes from time to analyze contacts, number of contacts read the same thing as "My Contacts" on Google. See also: http://forums.palm.com/t5/webOS-Software/Google-sync-partial/m-p/259891/highlight/false

    This was confirmed by @spouse1775: SOLVED! I searched my google contacts for #, & and *.

    It seems that synergy has a problem with the contacts that contain characters such as #, & and *. I don't know that there are others. I don't know if it is only in the name field or other fields in a contact as well, but it is a start.

    Hello Palm, this is a bug. This must be fixed. Contacts should be able to contain these characters.

    ORIGINAL MESSAGE:

    I struggled with this for hours. The new information that I added to a contact on my Palm Pre (my default Google account setup program) do not seem to update my Google matching online contacts. Try to solve the problem, I've completely wiped out my phone and started around. When my account completely downloaded the Google contacts to my pre, I noticed that many of the contacts came down. Whenever I deleted and added the Google account, the same number of contacts came down, always less than the total amount.

    After reading a few posts, I found that others understand that spurious characters in a Google contact cause synchronization problems. So, I exported my Google contacts in Outlook CSV files so Google CSV and imported into a blank Google account. Add each of the new Google account on my Pre came back with a number different contacts downloaded, but always lower total online.

    Finally, I figured out that export a vCard out of Google Contacts "cleaned" information. When I exported all of my Google Contacts vCard file and imported into a blank Google account, Google downloaded on my pre perfectly all the contacts in this new account and synchronization now seems to work again.

    NOTE: the vCard DO NOT maintain the designation of Group contact Google. You need to export a vCard by group and import them into Google by specifying the group in which you want to import the contacts.

    I hope this helps. No need to erase your phone or delete your backup profile.

    It worked for me:

    Steps to follow:

    1. remove your Google contacts from your Palm Pre app account

    2. sign in to your Google account and access Contacts

    3 export contacts by choosing "Who do you want to export?" and select "vCard file" for "what export format?

    4. save a file of all contacts or a file by group

    5 remove all contacts in your Google account online

    6 import the vCard in your Google account files, assign to the Group during the import phase, if applicable

    7. Add your Google account as an account in the contacts application on your Palm Pre

    No amount of purging of contacts has worked for me. I had to remove all instances of contacts with special characters in names (I had 3 symbol #). After that, and 10 minutes from time to analyze contacts, number of contacts read the same thing as "My Contacts" on Google.

  • Palm pre 2 stuck on the hp logo

    I had a problem with palm pre 2 (2.2.4). I use it in India. Now, he has been slain at the hp logo and I need a procedure to get rid of this feature of evil.

    Here is a link to remove the battery from the series of pre phones.

    http://KB.hpwebos.com/wps/portal/KB/na/pre/pre2/unlocked/solutions/article/44919_en.html

    While you're there, it would benefit you to download and read the User Guide:

    http://KB.hpwebos.com/wps/portal/KB/na/pre/pre2/unlocked/downloads/page_en.html

    WyreNut

  • Transferred to Palm Desktop for Palm Pre event calendar are incorrect

    My old phone, a Center, has been synchronized using Palm Desktop 6.2.1 on Vista. I used the data migration tool, and all my data transferred to my Palm Pre. (Just directly Palm Desktop > Palm Pre).

    The only problem is that a lot of my events are not on the correct days (ex: an event in Palm Desktop comes Sunday, now appears on my Palm Pre Monday).

    I don't have the time to sort out again all my calendar events since this is the case of random events.

    Other complaints that I have on the calendar, it's that the birthdays of my contacts do not appear as events, even those in Agenda facebook. In addition, it would be nice to be able to classify the events and color coding in the calendar.

    For transfers of schedule of the Palm Desktop, upgrading your Palm Desktop version 6.2.2 (rather than just the 6.2 shown in the migration instructions) will prevent specific annual date all day events, such as birthdays and other events, to appear on the wrong day.

    He let still one day of the week of the annual events, like Thanksgiving, the demand for each 1 month instead of every 12 months.  These must be set manually on the meadow.

    Alan G

  • Support for CalDAV in Palm Pre

    From what I can read on the official homepage and all exams, the calendar in the Palm Pre software is able to synchronize with Google Calendar online.

    My questions are:

    * Is the synchronization takes place using CalDAV?
    * If Yes: can I subscribe to the other CalDAV Google?

    When you add calendar accounts, it gives you only the 3 options for MS exchange, Google and Facebook... and no option exists anywhere to add a URL.

Maybe you are looking for