Palm pre more (Verizon) does not connect to the Exchange Server

I've been on the phone for 3 days (bought the Verizon Pre the day it came out) and couldn't connect to my companys mail server. I had a Palm Treo 755 for years and have always got my email to that. After days of talk with representatives of the Palm, I am told that no. Verizon Pre is able to connect to a server to exchange corp at this time. I'm quite upset hereby, since after listening to a Council of representatives of Palm, I've had a computer scientist to ensure that our server was updated, we had the correct certificates, etc. This of course took hours to complete, and the person of COMPUTING time is not cheap. So afte spend all that time and money dealing with this, I learned today by a supervisor at Palm that ANYBODY on Verizons network is able to connect to their mail corp server and that it was an issue that is discussed in.

I searched the forums and found a lot of this Sprint service problems, but didn't find any with Verizon. Anyone else out there on Verizon and unable to connect? Or maybe the better question is, someone out there have a pre with Verizon and IS able to connect to their server Exchange (EAS)?

Correction to my last post. After doing a reset on my phone and update of our server, I was able to connect to my email. Thank you for your comments update to SP2. Overall, I am still very upset over the phone support provided Palm. As I mentioned before, I brought to the SP2 SP1 vs option several times by phone and I said whenever it was not the question. Even my computer, have fought a little, to get this update since that he had heard the same information I did representatives of the Palm on the phone. After you have created an account on here and PDAguy pointing me to the long thread about people having a similar problem, I showed it to our it guy and he has fortunately upgraded our server to SP2.

I'm happy to get this issue resolved, but feel still Palm mislead me along the way, probably cost me over $ 400 in IT supports, lost my time and traveling in a Verizon store to swap a perfectly good phone and I try the different options which should not be fooled. I did 3 different calls to Palm (with my COMPUTER technician who has been paid by the hour) and each call lasts about 1 to 1-1/2 hrs. Most of the current time on hold any 'research' rep my question.  Even had a representative on the phone to me lie and tell me that he was able to connect to our server (using my info) with a meadow he had with him. He told me so I had a defective phone, and I was directed to return to Verizon to switch the phone outside. After I had passed the phone out, and of course, it doesn't work, I was then told by another representative of Palm and his superior that it was a known issue and that person is with Verizon was able to connect to a server (with a pre) because of a software problem on the phone. I got a refund from Verizon to get this phone for $149, but with all my time lost, the cost of my computer and the lack of knowledge by representatives of Palm, I think I have probably the most expensive Palm Pre Plus there.

Message edited by tjp2176 on 01/28/2010 20:03

Tags: HP Tablets

Similar Questions

  • Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

    HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

    I installed Windows 10 once again. After installing HP Support Assistant work.

  • HP8600 does not connect to the ePrint Server

    HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

    The printer is connected via a wireless network and can be printed from any device connected to our network.

    Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

    The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

    Version of the firmware of the printer is CLP1CN1232AR

    Any ideas? It does not appear to be blocked by a firewall, so really lost here.

    Hello

    Try to define an alternative DNS and check if that can help you:

    1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
    2. Navigate to throguh IP of the printer, the web browser on your PC.
    3. Click the network tab.
    4. Under, click IPv4 wireless.
    5. Under the DNS Configuration, select manual.
    6. Set the address preferably as 8.8.8.8
    7. Set the e-mail address alternative as 8.8.4.4
    8. Click on apply to confirm the change.

    Now, turn the printer off and turn it back on and check for the difference.

    Shlomi

  • Dreamweaver does not connect to the localhost server

    Hi, I'm pretty new to CS5 and have been learning mainly the CS5 Bible.

    I use an Imac under Snow Leopard.

    Downloaded MAMP and installed ok - start page display and the States servers works ok.

    File server root is the user/Applications/MAMP/htdocs

    have copied the Techniques folder in the tutorial in this folder and have imported the included database in myphpadmin and everything seems ok

    Go to configure the site server, following the instructions in the book, and this is then I try to connect to the database.

    Dreamweaver won't give the following error message.

    error message.jpg

    It seems that I am without mapping to the right folder. I guess I should be reviewed in the htdocs folder, but it does not connect.

    Can anyone help please with a speech through this configuration.

    Thank you very much.

    NottsPizza

    You use the default MAMP ports or have you go to the preferences and set the default value of Apache/mySQL?  If you left on the default MySQL port is "8889" which means that your mySQL would read 'localhost:8889' because otherwise DW research only on the default port.  Everything seems in order.

  • WANT to 114 does not connect to the Web server

    Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

    I tried everything-

    1 re-install services - error cannot connect to the web server

    2. Update - error cannot connect to the web server

    3 give the static IP address

    4 restore the default settings

    I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

    Hi sbenzie,

    How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

    Not yet given the information above, here's what I would try.

    I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

    This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

    Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

    Now try to connect to Web Services again.

  • The network card does not connect to the remote server

    My desktop computer has been recently updated to Windows 7 64 bit so I had to reinstall everything. Part of my job includes pulling data from two separate databases on a remote Oracle server. Previously with Windows 32 - bit Oracle SQL Developer worked after that I installed the Oracle Client and configured using Net Manager AMT settings. However now in SQL Developer, I get the following error message when you try to connect to databases using the same exact AMT settings.

    Error: "status: failed Test failed: the network adapter could not establish the connection.

    Versions:
    Windows 7 64 bit
    Oracle SQL Developer 3.2.2 (64-bit)
    Update to Java SE DK 6 43 (64-bit)
    Customer of Oracle 11 g R2 (64-bit)

    I've set up two databases under Naming Service in Oracle Net Manager. I used screenshots of my previous Net Manager settings to create the connections if everything is correct. Also, the two couplings to test successfully in the Net Manager. Contains the tnsnames.ora file

    PROD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP) (HOST = thor)(PORT = 1526))
    )
    (CONNECT_DATA =
    (SERVICE_NAME = PROD)
    )
    )

    DWHOUSE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP) (HOST = thor)(PORT = 1526))
    )
    (CONNECT_DATA =
    (SERVICE_NAME = DWHOUSE)
    )
    )


    In SQL Developer, I adapted the new connection settings exactly as before with a different screenshot of my connections to the previous developer. For example, I selected 'TNS' of the connection Type and selected "DWHOUSE" for network Alias. I even tried to put the chain of connection such as the login, but everything I've tried has made the mistake of connection.

    I followed some of the suggestions in other threads, but everything seemed to work, as I was able to connect to two databases using SQL more. Also, 'tnsping prod' both 'tnsping dwhouse' resulted in an OK. Same ODBC using the Oracle driver works to connect to these databases.

    I thought installing the JDK, Oracle Client, and SQL Developer as well as my screenshots would be an easy process and without hassle to connect to these databases. I'm doing something wrong? What else can I try?

    Of course, the point marking in your recent post concerns the former developer SQL install connection very well during execution by the G-drive.

    Although I'm not sure of the exact rules, I noticed that when the Oracle client resides on drive C, but the SQL Developer install is elsewhere, captures some files in its installation rather than from the Oracle SQL Developer client directory. An example is the ojdbc6.jar file. So you could also try installing SQL Developer 3.2 on another drive (internal or external non-disque C) and see if it works.

    -Gary

  • Windows 7 Pro PPTP VPN 807 error and does not connect to the remote server, XP machine connect without problems

    I'm just set up my new windows 7 laptop (Dell Precision M4400) running windows 7 Professional and VPN are not working, they're always bombing with error 807.  "The connection between your computer and the VPN server was interrupted."

    I created a PPTP connection in order to connect to my workplace and connecting I continually receive an 807 error.

    To check my internet etc is work that I have connected to the same place through my existing XP laptop computer (DELL precision M4300) which has the same VPN settings.  Everything connects aok.

    I'm also running ESET as my anti-virus and firewall and that you have disabled it to test (normally I have no problem running this and is also running on my XP laptop).  I also confirmed that windows firewall is turned off.

    I connect wireless at home, internet works fine, firewall has not changed at each end (I manage both ends) and such noted works for my machine also running more XP wireless.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    Note to resolve this problem, we have a support professionals who are well equipped with the knowledge on Windows 7 issues, do please visit the link provided below.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think

  • Adobe creative suite does not connect to the adobe Server

    purcsed and downloaded to creative suite of internet for $9.95 a month. He worked for two days and now when I click the icon, it says that it is impossible to connect to the adobe servers. My internet works fine except for that. any suggestions

    See response 1 in cannot download the fuse test CC version found it does not go beyond 0% need suggestions!

  • Outlook does not connect to the mail server

    All of a sudden Outlook has stopped working and will not send or receive.  Error messages:

    Receiving ' reported an error (0 x 80042108): 'Outlook cannot connect to your mail server incoming (POP3). If you continue to receive this message, contact your server administrator or the ISP (ISP). »

    Also sending error 0 x 80042108

    Any suggestions?

    Hi miscojg,

    There are some possible causes of this error. Displays the article on http://support.microsoft.com/default.aspx/kb/813514 , and I suppose it might give some ideas on where to start looking.

    Kind regards

    Hans

  • 24.7.0 update link does not connect to the update server

    FirefoxESR 24.4.0 was packaged with Debian. For several days, I got a pop-up message to install update security, 24.7.0. The link from Firefox Mozilla says that I have the most up to date version (24.4.0). Manager software apper said that everything is up-to-date. Whenever I click on the link to install on the context menu, the download window stays on the screen «connection to a server to update...» "indefinitely, never connect. Firefox and everything works fine, there is no apparent end this reason why connection should not take place.

    I will close the loop on this issue because I found a simple solution and it seems that a number of other people have the same problem. The essence of this method appears on a number of sites. I extract the key pieces of superuser.com . Linux Mint is a version based on Debian and this deposit has Firefox V32. This method loads and installs from there with a few commands.

    First of all, you keep the current profile and remove the current version of Firefox. Use the file manager to temporarily rename the profile directory home/.mozilla/firefox to something like home/.mozilla/firefoxsave. Use the software Manager to uninstall Firefox 24.4 and he will ask all of the associated files can also be deleted. Theoretically, you can do this with a terminal command, but my installation had trouble with a kind of confusion of name with Iceweazel even if that has not been installed.

    Use the file manager to open/etc/apt/sources.list. There is a provision under the other software to add a repository. In this box, paste:

       deb http://packages.linuxmint.com debian import
    

    and close the file. From the terminal:

    get the public key (paste these lines):

       sudo gpg --keyserver pgp.mit.edu --recv-keys 3EE67F3D0FF405B2
       sudo gpg --export 3EE67F3D0FF405B2 > 3EE67F3D0FF405B2.gpg
       sudo apt-key add ./3EE67F3D0FF405B2.gpg
       sudo rm ./3EE67F3D0FF405B2.gpg
    

    Then:

       sudo apt-get update
    

    Now you can install Firefox either with another command:

       apt-get install firefox
    

    Or use the software Manager. Research on Firefox. The V32 now appears with the 24.4.

    After installation, return to the Firefox profile directory. There will be a new named a firefox created by the installation. Rename or delete this one. Then rename the original back to firefox directory. Use the file manager to go back and open /etc/apt/sources.list and uncheck the entries in Linux Mint. Then restart.

  • Does not connect to the update server?

    When you start firefox, im getting one "needs update" However, when I click ok and then next, the download bar rises, but reading still "searching for update server.

    If you have problems with the update then best is to download the full version and uninstall the currently installed version.

    Download a new copy of Firefox and save the file to the desktop.

    • Uninstall your current version of Firefox.
    • Do not remove the data of a personal nature when you uninstall the current version.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

    I am weather evauating to buy Dreamweaver CS6...

    Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

    On the connection between States Dreamweaver: "server certificate expired or contains invalid data."connectionerror.png

    I tried:

    -ALL Dreamweaver Server configuration options

    -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

    -Make sure the certificate "issued to the"domain name is my domain name. "

    I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

    This has been discussed previously. I recommend reading my old thread for details:

    http://forums.Adobe.com/thread/889530

    But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

  • (GET MORE) On a printer C309n Hp Photosmart Premium Web application does not connect to the internet?

    Hello everyone; Does anyone know why the app GET MORE on this printer Hp Photosmart Premium Web C309n does not connect to the internet? All other applications are connected ok. The site is down? someone knows something about it? HP is the fixation of this hopefully soon? Thanks for any info.

    I am very sorry for your difficulties.

    You can try the following, if you please, of your printer face:

    Setup (wrench on sceen House of printer)

    Web

    Updates

    Product updates

    Accept the update of product offered.

    Please let us know:

    (1) if he is offered an update of product, and if so, it ends correctly?

    (2) receives more work after the update?

    In the future you can keep your FW up-to-date more easily by selecting the option 'Automatically' for the settings of update of product in the update section of the product in the Web menu.

    Key

    Web

    Updates

    Product update settings

    Select "automatically".

  • photosmart HP b210a more does not connect to the server.

    I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

    Technical specification:

    iMac running Lion

    Mac Book under Snow Leopard

    iPad

    iPhone 3 g

    AT & T Uverse router

    Thanks to anyone who can help!

    The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

  • Pavilion G6 does not connect to the cellular device

    I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

    Hey RC800,.

    Thanks for the info.

    I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

    If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

    Please, try the following:

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test another iPhone connection:
    Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

    Let me know if this helps.

Maybe you are looking for