Palm TX: Outlook via Microsoft Exchange synchronization, but no data is transferred

Dear Group

I'm not a beginner. I am very computer and hardware gadget and intuitive software. My PalmTX syncs, but there is no data transferred. Previously, Sync worked well on Outlook 2003, 2007 and 2013. However, I started having problems with the transfer of data after synchronization when I lowered the score of 2013 Office to Office 2010. I've demoted office 2013 because it was a big eater of resources on my computer. I stripped all the reminants of office 2013 (including the reminants registry) before you install Office 2010 to ensure that there is no possibility of confusion for the Palm TX. I tried freezing and reinstall several times. Note, every time that I run this process, I uninstalled the software/files Outlook and Palm/all software including any reminants of registry. When I reinstalled, I started with the Outlook2007 then the PalmDeskTopSetup6.2.2, then the PalmConduit2007. Also, I tried several new synchro and cleaned/disable-dusted cables connectors for synchronization on the Palm TX itself... with no success.

I think the problem is that the conduit itself is not be trained. In Hotsync when I click Configure > change hotsync action > settings, I get an error message stating "Microsoft Outlook Conduit - an unknown error has occurred." Previously, this setting function would have text that would allow me to change how the conduit receives data (e.g. MS Exchange;) IMAP) I remember correctly - not 100% sure. If my suspicions are correct, one of the following values is corrupt: PalmDeskTopSetup6.2.2, PalmConduit2007 or MS Exchange. Given that I don't have a "fresh" copies of PalmDeskTopSetup6.2.2 and PalmConduit2007 because HP links no longer work, I ran a repair on my file of MS Exchange. It still has not fixed the problem. Note that whenever I have to uninstall/reinstall Outlook, I delete the MS Exchange and files all connected, as it recreates it from scratch when Outlook is reinstalled again. To be clear, does not preclude MS Exchange as the culprit because Microsoft adds a fix or security to every time something else change always 'breaks' :-).  I'm not sure what to do next. If anyone has had this problem or have any suggestions on what I could do to fix this? I really really need my at least my calendar of transferred to my Palm TX. Help, please. Thank you.

My computer and the Palm TX is the following configuration:

* Win7 x 64

* In the course of running Outlook 2007 (downgraded from 2010 to 2013 because MS Office Products are resource hogs on my computer)

* Email Sources: MS Exchange (work) and local ISP (home - email IMAP) - both accounts are running simultaneously

* Synchronize via USB

* Driver: Akeeba to Win x 64

* Software installation of operating system Palm: HP - PalmDeskTop6.2.2 (contains HotSync Manager 7.0.2); HP PalmOutlook2007Condiut

* Message from the outlook journal file:

-Successfully synchronized outlook calendar

  • Duration: 1.1 seconds
  • Outlook calendar
  • OLERR: 0C-000F (0X8000FFFF)
  • OLERR: 0D-0003
  • OLERR: 0D-0001
  • Not synchronized

Dear Group

I solved my problem. I wanted to share with you the solution for those of you who maybe had a similar problem AND you have tried all the suggestions that have been posted since the Palm OS/WinMo Forum without success. My problem is that something that she prevented the pipeline connecting my Palm Outlook of training courses. The result was that my Palm computer / would synchronize but no data (entered calendar, tasks, etc.) won't be transferred. Before we get to what has worked for me, run through the following options before trying my fix:

  1. BACK UP YOUR FILES! BACK UP YOUR FILES! BACK UP YOUR FILES!
  2. Repair your outlook (pst or ost) files - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  3. Delete your current outlook profile and create a new profile - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  4. Completely uninstall outlook, which will include the deletion of the relevant registry entries and system files. I HIGHLY recommend that you DO NOT attempt to do it "manually" yourself unless you experience such changes on your computer. Incorrect changes to your registry files or computer system will completely shut down your computer and ultimately to lose all your data because of the methods that will be needed to fix your mistake. The good news for those of you who have no expertise in this area is that Microsoft has made a DIFFICULTY IT PATCH REMOVAL TOOL that will automatically run a complete unstall of outlook or office.  -microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  5. To ensure that your data are fully INDEXED. In your control panel, there must be a parameter called OPTIONS of INDEXING. If Indexing is not complete, follow instructions from Microsoft for your version of Windows to allow for the completion of indexing. Note that this will take time. You can do this night. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful... Uninstall the components of Palm. Return to the OPTIONS of INDEXING and completely Strip and rebuild your index from scratch by pressing the Refresh button in your version of Windows. Note that this will take time, again you can do this night or weekend depending on how much stuff you have on your computer. When finished, reinstall the components of Palm, synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  6. Finally, what worked for me was creating a new WINDOWS PROFILE. I discovered thanks to make another system and software checks that I did not mention here that my WINDOWS PROFILE was damaged and it was what was causing the failure of training leads between my outlook and palm. How do you create a new windows profile will be different depending on your Version of the Windows operating system.  -microsoft has detailed instructions on how to do this with your version of Windows. Uninstall and then reinstall outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm.

Good luck

Concerning

Tags: HP Tablets

Similar Questions

  • I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

    prospects for bt infinity

    I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

    Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

    Anyone have any ideas?

    Allan M

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

    Ramata Thakur

  • When you open Outlook 2007 "Microsoft Exchange is unavailable" outlook opens when work offline is selected

    Opening of professional outlook 2007 on a windows 7 OS, a warning displays "microsoft exchange is unavaialable" and then a few other 'cannot connect to ouitlook' warnings and it obly opens when work offline is selected. I trid exchange in the removal tools account settings but it won't let me, I am very frustrated as all I want to do is use hotmail online

    Opening of professional outlook 2007 on a windows 7 OS, a warning displays "microsoft exchange is unavaialable" and then a few other 'cannot connect to ouitlook' warnings and it obly opens when work offline is selected. I trid exchange in the removal tools account settings but it won't let me, I am very frustrated as all I want to do is use hotmail online

    Then, you must remove the Exchange account that you set up in the first place. Close Outlook and make the accounts Control Panel-Mail-Email and delete the Exchange account. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • BlackBerry Z10 Z10 suddenly unable to receive the mail via Microsoft Exchange

    I can send but not receive email through Microsofe Exchange.  When I go into the account setting to edit email, I can't 'Cancel' or 'Save' to be stuck there.  A pinned the same problem & how to fix it?

    On the other hand, I can send and receive emails in my gmail account.

    Ereeamazing wrote:
    Try a battery Pulllout (the phone battery and reinsert after a few wrenching minutes)

    Ereeamazing, please stop posting where you don't know and don't understand the question.

    AC68, it comes to a BES10 account, through your business or your employer?

    I suggest two things, remove the account from your device, restart and add new.

    And, as your BES or IT Admin if you have further questions.

  • BlackBerry Smartphones Can you synchronize all Outlook folders on a Blackberry "BOLD" using Microsoft Exchange?

    Hi, I use a Blackberry "BOLD" to view my Inbox, but I would love to see my other folders, including my spam folder. Is it possible to do? I do not use the Blackberry Exchange Server (BES) - I am using Microsoft Exchange.

    Thanks in advance for any help you can provide!

    Hi and welcome to the Forums!

    FYI - BES = Blackberry Enterprise Solution (or server)... it is not strictly for the Exchange...

    Use of the file is a feature of BES. So if you use it, then it is not available.

  • Palm Pre Outlook synchronization

    Yes, Chapura worked very well as a 3rd party. Now they want $$. I paid for this new 'fantastic' phone (along w / monthly rates of Sprint) and I have to pay more to synchronize the phone with Outlook on MY computer? What gives? How can I sync the phone with Outlook 2007 (or any year besides)? ANY help would be greatly appreciated. How many other full apps we will pay to make the phone what to do?

    -Not a google account holder, incidentally...

    Tgatah wrote:
    Achilles - I'm not a pro at this by all means. Could you explain in short how to manually add Outlook? I believe I have understood but would be much easier with a few simple instructions to follow. As noted by using the 'demo version ' of Chapura I could all loads, but the latest changes to my Outlook on my pre. Thanks for any info. You can provide.

    On your Pre go to:

    Main email page > (email icon, top left corner) preferences & accounts > add an account > Type in your information > once it fails and you receive the prompt 'start again' or 'Ok' press Ok.

    Now, you will be at the page 'add an account '.

    = EAS email account

    = Email address enter your address

    Incoming mail server = https:// * see asterisk below

    for the this line, this is where you will need to type in your Outlook configuration. If you have Outlook 2007, where I found this on my own. Not sure if it is in the same place for Outlook 2003.

    Open your Outlook > tools > accounts settings > click twice on the Microsoft Exchange Server (should be in the middle of the window under 'Name' & 'Type' > additional settings > click the Connections tab > Settings Proxy Exchange ("To connect to Microsoft Exchange using http" should be checked marked) > use the address that is in the line marked "use this url to connect to my Proxy... etc.) This is the address that you place in your pre for 'Incoming mail server' https://

    Area = I have a domain for mine and that's what I used. If you don't have one, just leave it blank

    Username = your login user name (sometimes it isn't your e-mail address, and other times it is, depends on your place of work)

    Password = your password by e-mail

    Click on "Sign In".

    NOTE: If you get to the window of Exchange Proxy settings (listed above in bold) and all fields are empty (https://), chances are your admin does not external devices such as mobile phones, BBerry etc to connect to your servers. Allow him to some companies, some do not.

    Message edited by Achille on 26/08/2009 11:08
  • Treo 680 does not synchronize with Microsoft Exchange 2007

    Hello

    My company just upgraded to Microsoft Exchange 2007 and my 680 order teo synchronize my emails. I checked with the support of plam and they informed me that "the Treo 680 unlocked device no is not supported with Exchange Server 2007."

    All the world is facing this problem. Can anyone help?

    Thanks in advance.

    That link doesn't work for me, but I followed him it down here: support > phones > Centro > Verizon > downloads > software Bonus > Palm Versamail (to half way down on the next page)

    http://ws.Palm.com/MyPalm/MyPalmGenericUser/ControllerGeneric.jsp?&action=showbonus&ProductName=CENTRO690P

    Glad to hear VM4 works for you, if you encounter bugs, please post to inform others.

  • Initial synchronization via Bluetooth works, but the next day, the data to be transferred, but no data is shared

    I was able to set up my T3 to sync via bluetooth to 4.1.4e on my Vista 64. T3 is not compatible with 6.2. However, once the initial synchronization works perfectly, I can't sync again, after closing down, without reinstalling the prgram with "fix" option and do an another initial synchronization. If I don't do this the hot sync window opens and the arrows become but no data is actually transferred. I also can't "uncheck" the USB option in the hot Sync Manager, leaving only the option of "local"except after the initial sync." The next day it I cannot remove the USB sync option.

    Any thoughts?

    I was able to find a solution in another post. You must run Palm 4.1.4e as a modifiable and only allow sync to open when the program is opened.

    This works.

    Thank you all.

  • Microsoft Exchange - Microsoft Outlook troubleshooting...

    I can't get access or open my Outlook... everytime I try it tells me the connection to Microsoft Exchange is unavailable and that Outlook must be online or connected to complete... what it means? I'm always connected to the internet too...
    Help me please!

    Hello

    Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

    Discussions of Questions General Outlook
    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

    MS Office discussion groups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
    And here:

    Microsoft.public.Outlook discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

    Office newsgroups
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • "Security error" when setting 'Microsoft Exchange Hosted Services' Exchange account (user in company)

    I am a user in a company with a very large company that actually uses Microsoft Hosted Exchange services hosted by Microsoft employees in their facilities.  I called Palm support and they were clueless and zero help.  The lady pointed me to some Palm article I had already read and only remotely had nothing to do with my problem.  I don't see anything about this error message in the forums and google searches. Sprint has even replaced my other reasons palm pre, and the same error occurs once I configured the exchange account. I also see the error when I set up my account on my pixi nine wives. Our pre and pixi have already exchange accounts set up with success on our phones that are hosted by sherweb. Sherweb's exchange accounts work fine. I tried to set up this account of microsoft hosted exchange 5 - 6 times with the same result. He accepts my configuration information and adds to the list of email accounts available in the meadow. However, it keeps popping up the message stating "error of security policy:"Exchange..." Tap for details"(with a yellow exclamation point). Then he said "Security policy error" the Exchange (first part of my email address) account is disabled because it is impossible to define security policies. "'Leave this option disabled' or 'delete account '. I know that something does not work because it applied a policy of password or PIN on my phone which is not necessary, unless the account has been added. I can also see it in the "Mobile devices" section of outlook web when I login. This is the place in web outlook where you can see the last time the device synchronized, if remote, you can wipe the phone etc. If anyone has an idea how to solve my problem please post. Any ideas? I'm fresh out of ideas on this issue and very frustrated by the Palm developers. Just another example of evil-development and practical tests by Palm. I hope they correct this problem on later versions, but I'm only slightly optimistic that they will never get this medium of exchange e-mail at the level necessary for the support of large corporations. What I know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and an iPhone 3GS (confirmed by the other coworks who have set up their phones using our Exchange services). Accordingly, I have no choice but Palm to blame for this problem instead of Microsoft. Please, Palm fully support microsoft exchange e-mail users!

    After a lot of research on the subject, here is my point of view on the State of support for MS Exchange @ Palm and other companies.

    Unfortunately, Palm Pre and Pixi, WebOS is not fully supported Microsoft Exchange.  This has led to numerous reports of frustrated customers and countless hours of time wasted by consumers and technical support trying to figure out how to connect these Palm devices to the MS Exchange e-mail servers.  Way to go Palm!  Provide support for all the free email accounts worldwide and decide not to develop a product that is able to support your most rich and more influential-based email clients.  These are the people who are most likely able to spend more money on your mobile products or make decisions for companies that are able to buy huge amounts of smart phones.  Way to go guys!  Penny wise and dollar foolish if you ask me!  Palm supports only partially a handful of MS Exchange security policies.  They document what they take in charge, but they do a very poor job of documenting or even explain the limitations of the software.  Their States of documentation that the security policies that are not supported will not be applied and that users will still be able to connect to the exchange server.  This is certainly not true based on the reported error and other similar user reports.  Here is how iPhone and Palm compare in regards to the support of MS exchange security policy.  Notice in the quotes below the iPhone supports the policy of 'require the encryption of devices' which is very probably used by your greater and more security conscious companies or Government institutions.  I'm sure that Palm's inability to support "device encryption" is why I get this error, even if I have really no way to prove it at the present time.  Come on Palm, if you go to support full POP3 and IMAP, you must provide the full support of the binding protocol and political security by Microsoft Exchange product.  Here is the comparison between iPhone and Palm WebOS:

    ' Said the site of Apple, the iPhone supports the camera allow, password enabled, allow a Simple password, alphanumeric password, Password Expiration, history of password, Maximum password attempts failed, minimum password length, maximum idle lock, policy, Minimum refresh interval complex character devices. ", require manual synchronization while roaming and - in iPhone OS 3.1 only - require Device Encryption". (13 security policies)

    "Palm Web site says its WebOS 1.1 and later support active password, alphanumeric password, password history, Maximum password attempts failed, maximum length password, lock of inactivity maximum, Minimum peripheral characters complex and Password Recovery." (8 security policies)

     

    Windows Mobile 6.1 supports all THE policies.

    BlackBerry does not support the EAS (MS Exchange)

    Google's Android is not compatible EAS (they may have recently released some support but not full)

    Conclusion: If you want a mobile device that fully supports MS Exchange, buy something that is running Windows Mobile 6.1 (or higher) or even an iPhone 3 g (or more).  At least, until Palm decides they want to throw a development more $$ to support Microsoft Exchange E-mail to enhance their level of support.

    Reference: "how to avoid the lie of the foreign exchange policy by smartphone' http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004?page=0, 1

    Message edited by morgan1112 on 12/01/2010 15:00
  • Microsoft Exchange: Server does not delete messages deleted or moved with Mail

    It drives me crazy.  I have a Microsoft Exchange account at work that I put in place with the mail.  It seems to work perfectly in almost all respects - it synchronizes new messages, and if I send emails it works fine.  The ONLY thing is to delete messages from my Inbox on the server when I use Mail to delete them or move them out of my Inbox to a local folder; It is not even move them to the folder items deleted on the server.  So, I get messages saying: my account is almost full, and I need to access my Outlook account on a web browser and manually remove the y of my Inbox.  Yes, I checked my account preferences and made sure "store the deleted messages on the server" is disabled.

    Can anyone help?  I use El Capitan with Mail 9.3 10.11.4.  I'm ready to tear my hair on it.

    You drag the message out of the Exchange Inbox to records the "on my Mac"?

    If so, you copy the message.

    To move...

    • Use the move icon to move the message
    • Use the command key.

    This will force a move instead of a copy. It works exactly as to put them into files in the Finder — between different servers (and move from an Exchange or an IMAP folder to a local folder moves between server) the file/email is copied by default.

    Cmd-drag forces a shot instead. Dragging between different folders on the same server goes by default, but a copy can be forced by holding down the Option key when you drag.

  • Sync Palm with Outlook 2007 takes 10 minutes

    When I sync my palm Centro works (finally!), but it takes about 10 minutes to synchronize everything.  The e-mail and the information I have is on the MS Exchange Server, but I was able to sync this perfectly well with my office (also on the Exchange Server), but not with my new laptop.  It only takes 20 seconds to synchronize my Palm when I don't synchronize calendar or contacts.  I will not sync any message.  Any idea?  Thank you!!!

    Well I have seen people for an exchange account sync and do not have this problem. So I would say that you talk to your IT and see if the data are correct in outlook and Exchange. What is hotsync is to see something and in regard to 'confuse' however to cross data. Or you can remove the account turned off the PC create new impetus of Outlook profile data from the device to the PC and reconfigure the Exchange to use only the account e-mail (if possible)

    If you want we can install a different profile for your outlook contacts and calendar, so it does not synchronize the Exchange. But I would still recommend that you talk to your TI and see if they can do that anything first. They can solve this problem and keep everything in the outlook profile even if you do not have to switch back.

    Message relates to: Palm Z22

  • Problems switching from Palm to Outlook Dekstop

    Hello

    I'm doing the same thing - I always Sync my Tungsten E use of Palm Desktop on my PC (to work) and my Mac (at home).
    but now I want to sync with my Outlook 2007 calendar to work.  I have both used the CD that came with my Tungsten and downloaded a new copy of the Palm
    Desktop 4.1.4 but never at any point in the installation process that I am asked to choose to sync with Outlook or Palm Desktop, so the tungsten continuous
    for synchronization with Palm Desktop.

    I downloaded and installed the Updater of pipes Palm Outlook 2007 I saw recommended to that effect in another thread,
    Although I looked in my HD and the folder that contains it is empty.  Also, if I go to the start menu / programs, I don't have Palm Desktop, nothing that comes
    said 'Palm tree' or 'PalmOne', so I guess that the Conduit Updater has not been installed properly?  I remember that once the installation
    finished, a window is come to the top that said I might need to restart, and that if I restart it, the update automatically open when you restart and ask me to
    continue.  He never told me I should certainly restarts, and whether or not I did, nothing happened after that.

    Any ideas?

    I am running Windows XP with Office 2007.

    Thank you

    Ellen

    -----------------

    Re: HELP - switch from Palm to Outlook

    2 choices

    1. launch the cd supplied with your device and choose
    change the synchronization method, and then click Synchronize with Microsoft Outlook

    2. go to start / all programs/palm or palm0ne/pim conduit
    synchronization/synchronization with Outlook on your computer

    If you use the software from the CD there should be a mixer included thereon. so even if you were not invited to choose between outlook and palm desktop, you can always on after installation if in case you want to. However, im still pretty confused to hear that he has not asked allows you to choose between the two ducts Manager. in any case, here's how to make the switch.

    1. After installing palm desktop cd for tungsten e

    2 browse the cd by the menu/button to boot your PC right click and select Explorer

    3. Locate the CD-ROM drive in your PC when the CD is inserted

    4. open the CD and find the folder called PostInstall

    5. inside of this folder, you can see 4 folders in which 3 of them are .exe files (Blender of togo, versamail and prospects of the docs)

    6. choose selector Outlook by double clicking it

    If you encounter an error when you try to go, your installation is not complete and it must remove. but otherwise, just follow the instructions on the screen. You can also switch to 4.2 where you can see this mixer in palm under Programs folder but try you this option first if you do not upload to the web.

    Message is about: Treo 680 (unlocked GSM)

  • Apple and Microsoft Exchange calendar

    For two days my calendar from Apple on my Macbook does not synchronize the calendar more with my Microsoft Exchange entries account (still works with my iPhone 6 and iPad Pro). Any advice, or can only Apple solve this puzzle? Error message is

    There was an error trying to send your changes to the exchange server.

    I thought I was the only one with the problem. I get the exact same message. I was on the phone all day with the company HE's trying to find a cause, without success. Your message feeds my suspicion that it was caused by 10.11.4 update. Everything was perfect before synchronization. Have you received and support? Any guidance? Any possible solution?

    I tried all the usual steps to disable, remove and reinstall the Exchange account, but the error persists. iPad and iPhone sync fine. iMAC and MacBook are not.

  • AT300-101 using Microsoft Exchange Sync problem

    Dear Sir or Madam,

    I use an AT300-101 (ICS 4.0.3) and try to synchronize with my hotmail account.

    Syncronising the AT300 via the Exchange account does not work correctly. It works once in two days.

    The errormessage said, that the server is currently not repsonding. Even to re-create the exchange account after removing it, does not work properly.

    As sync my hotmail account via the Exchange with the other ICS 4.0.3 android devices (HTC, Samsung, etc.) works perfectly the problem seems to be the Tablet and not the exchange server.

    Do you have any idea how to solve this problem.

    Best regards

    Schemmi

    Hello

    Have you tested this after resetting the default Android system?
    From my point of view could be a problem in exchange server as mentioned here by MS:
    http://support.Microsoft.com/kb/2563324

Maybe you are looking for

  • Juno email, Thunderbird does not migrate my files.

    The Inbox migrated very well and I'm getting new email fine. But the other folders that I created are not there. (Other folders appear in G-mail, but not in my email of Juno). BTW, I'm new to Thunderbird; very nice to have all of my emails in one pla

  • Configurator can deploy more apps?

    Hello You can use configurator to deploy applications more once you have all your iPads travel configurator to prepare them for the students? I know that you can add that app and re deal throughout the Configurator, but since its manual and we 100...

  • Generating waves in Sin with NOR-6733

    HelloW, I am tying to create a waveform of sin and I don't know if the way to create this wave is similar to the creation of output analog normal best volts That's what I did: int AnalogOutputSin (double * freq, double * amp, char chan [256], double

  • Factory reset on MINI 1000

    HP Mini 1151NR PC Have currently the Mini 1000 - I want to back the laptop to factory settings, no need for data to back up, wouldn't he endured to give to someone else.  I'm having a hard time finding how do - HELP

  • looking for Win XP sata driver

    I have a Vantec sata/ide to usb 2.0 that I am using, but I have XP machine a window. It only comes with the Windows 98 driver. Is there anyone who can tell me how to get an updated driver? Thank you