PALM TX will turn on and work with power cable plugged but not when disconnected?

Similar Questions

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.

• C7250 connected wireless works with wired ethernet PC but not wireless PC

  C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

  Can ping the IP of the PC cable but not wireless computers.

  Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

  When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

  Firewall is not the issue because I tested with the firewall disabled.

  Any suggestions?

  Thank you for your help.

  I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

  I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

  Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

  I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

  THE PROBLEM WAS IN THE ROUTER.

  These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

  I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

  RESOLUTION:
  The router I was using was a Linksys WRT54GS Ver 1.

  I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

  I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

  I checked the firmware on the router worm 7 was the later and pulled up.

  The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

  I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

  I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

  I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

  Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

  All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

  I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

  THANK YOU FOR ALL YOUR HELP PRINTDOC!

  PRINTDOC BRAVO!

• How do I open the .snp with Microsoft Office 2007 files is installed? It works with MS Office 2003, but not with MS Office 2007!

  I have MS Office Pro Plus 2007 is installed on my computer. I also MS Office 2003 is installed on a different computer. Snapshot viewer is installed on both. My snapshot of work files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would allow me to save them either! Is this a problem with FireFox (3.6.8)? However, I have no problem, open them using IE7/8 on both computers. Any ideas? Thank you.

  I heard about other problems with Office 2007 to 2003, but most of the people do not have Pro/business versions with access, so maybe there's a previously unnoticed problem.

  As indicated in my previous post, I don't always understand how you try to access the file. Can you right click and "save link as" to download?

• RT code works since the LabVIEW environment, but not when I create and deploy

  I think there are a lot of reasons why this can happen, but I can't seem to pin one.

  I have a classic controls program that runs on a cRIO. We recently decided to change the communication of a ProfiBus comsoft on Ethernet/IP card. (Industrial Protocol for Allen Renaud automata). For various reasons, we put the fuse in communication in the control loop.

  Now when I run the LabVIEW now, it works fine. I can see data going to and coming from the controller. I can sniff packets and they look good. I get about 30 milliseconds on the loop, which is long, but since I am running in the IDE, I think is not bad. (In other words, I get data in and out every 30 milliseconds).

  When I compile and set the binary on the cRIO, it breaks. I can still sniff packets, but what I'm getting now, is that all traffic to the controller of read requests. My write requests are missing. In addition to reading queries are poorly trained. Rather than ask 43 items in a table, they ask 1.

  A test that I tried was to disable the read request. For the binary file, I don't see any traffic. For the IDE, I see write queries.

  I use LV 2009 SP1. I have the version of NOR-Labs of the Ethernet/IP driver. (We have a request for a quote, but do not have the official driver.) In the meantime, faster I get this done, the happier everyone will be ;-)

  Any suggestions?

  Attention to the nodes of property which is usually my problem when it happens.  Some who say they work in RT do not work in compiled RT

• I have a hp netbook and it turns on and works fine, but it will not charge?

  My netbook was purchased in November, worked perfectly, then the other day I was using it and noticed a low battery. I plugged it in and it would not charge. Thinking it's maybe taken, I moved around, but nothing helped. Is there a reason that this is happening? A short, perhapse? Or should I try to buy a new power cord? Or should I just send it back with my one year warranty? Thanks in advance!

  Lauren

  I was thinking more in terms of a defective battery. If it turns on and works but the battery won't charge, the most likely thing is the battery. On netbooks, I believe that the battery is covered for one year, but you will have to pay the shipping to get help from the warranty on a netbook. I don't know if they will send just a spare battery and allow you to return the defective one (possibly). The catch-22 is that you don't know if the battery is bad until you try a new.

• New type of font "Century Gothic" and works well with the 'live view', but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank y

  I downloaded my new "Century Gothic" font type and works well with live view, but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank you!

  I use and Filezilla to connect to our FTP site.

  I see on line 42 of style.css

  do-family: 'Courier New', Courier, monospace;

  I see on line 180

  do-family: "Helvetica Neue", Helvetica, Arial, sans-serif;

  and I see FontAwesome used in several places.

  I can only conclude that Courier New is the applied font.

  If you have a different version of style.css on your local system?

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• I just pass the parameters and software my PowerBook has a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install.

  I just upgraded the software and settings, include CC, of my PowerBook for a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install. I try because whenever I restar keep bothering asking for installation, (by the way, the link is not updated). You will appreciate your help.

  never migrate adobe software.  It must be properly installed.

  Uninstall all the programs of cc you can, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• No sound from my laptop! in the control panel it says internal speakers are turned on and works but it is still no sound

  Yesterday there was no sound... today no sound?

  in the Panel, he said internal speakers are turned on and working, cannot restore the system that do not have a point to return to.
  can anyone help?

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

• Recently I install Adobe Pagemaker 7.0, but it is not my system hindi font visible just like the series Devi ismayl, KBC Serise etc. these fonts are is visible and working with Adobe photoshop, corel, office etc. and works well. Veuileez solve this proble

  Recently I install Adobe Pagemaker 7.0, but it is not my system hindi font visible just like the series Devi ismayl, KBC Serise etc. these fonts are is visible and working with Adobe photoshop, corel, office etc. and works well. Veuileez solve this problem as soon as possible.

  Can you also please check whether this version is still appropriate for your operating system?

  See: Adobe - Pagemaker 7: System requirements

  The system configuration required

  Windows

  • Microsoft® Windows NT® 4.0 with Service Pack 6, Windows® 2000 Professional with Service Pack 2, Windows XP Professional or home edition

  It is not recommended to run this software on any Mac modern like Windows 7 or 10.

  Good luck!

• I just bought 14 items and installed updates. Camera Raw version is now 9.3.0 and should work with my Nikon D7200 but is not

  Hello.I just purchased 14 elements and installed updates, version of Camera Raw is now 9.3.0 and should work with my Nikon D7200 but is not, help is needed!

  Good to know that things started working well for you.

• Is Re: Satellite A500-17 X - it allowed to do work with the charger plugged?

  Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?

  I remember having a laptop earlier and 3 hours battery lasted only 30 minutes.
  This will happen to my Toshiba A500 computer laptop X 17 too if I had to plug my charger all the time?

  Should I get out the battery if you don't use?

  > Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?
  Yes you can do it and you should not be afraid that this will affect the battery!
  After that the battery has been recharged, the grief process stops and the battery is not looping
  My cell phone is always on the AC adapter at home and the battery is still OK and it work properly!

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.