Panorama of camera scanning

I don't know how to stop the panorama.   I have experience with other devices (Asus Tablet) - and here the panorama starts and stops by pressing the shutter button.

By my Xperia Z3 Compact (5.0.2 Android).  I feel that I need to continue the movement at the end of the frame, as shown.

It is possible to terminate the scaned panorama manually?

@buchtikj

I have no idea, it asked far too many times, and I quite agree with you, it'll be great to create panoramas that we do not set the 270degrees.

Don't forget to contact Sony with your comments

http://support.sonymobile.com/global-en/contactus/

in the meantime there are third-party applications on the store game

Tags: Sony Phones

Similar Questions

  • line of Basler runner rul1024 - 57gm GigE camera scan with broadcom network adapter

    Hi, I am learning to use a camera basler runner GigE line scan with labview but encounter problems, please help me.

    My software and hardware:

    LabVIEW 8.6, software of acquirition of vision 2010,

    rul1024 camera - 57gm Basler, broadcom Netlink (TM) Gigabit Ethernet Network Card (not an intel pro 1000, so the driver is it also the driver broadcom).

    Q1: In the max, it appears two cameras, while I log in only one. There is a red X in the other and a camera in use error.

    Q2:

    The camera can get the image, but in the attributes of the camera, there is no trigger information, so it seems that I can't solve the relaxation in labview, while the camera supports the trigger mode.

    Hi Lynn,

    I read the page and find the solution. In fact, I just need further reduce the size of packet to 1500. It works fine now.

    Thank you ~.

  • panoramic photography camera problem

    Hey guys I'm trying to start painting in 3D space. Then I downloaded a grid and put it in the effect of panoramic photography. However, my device each time I move it throws me out of the sphere and outside. What I am doing wrong?problem.png

    I think I can see what is happening since your second video

    By clicking on the photograph panoramic and then using the orbit tool you actually turn the 3D around not the camera model. You are also tilting with your movements. You can reset it by going to the properties, coordinates and clicking on reset the coordinates and move ashore.

    If you then either click Display "current" and made to drag the mouse

    or Click the Globe bottom left of your screen, where the axis of the camera are shown, and drag the mouse, guaranteeing that the globe icon remains highlighted, you move the camera round, looking at side and up and down that you expect.

    Hope this helps

    Dave

  • Move pictures from my computer to a disk scan in my camera

    Somehow, I lost my photos on my camera scan disk.  Can I get pictures from my computer to scan disk in my camera?

    Somehow, I lost my photos on my camera scan disk.  Can I get pictures from my computer to scan disk in my camera?

    ===========================================
    If you connect your device to your PC via the USB cable... and go...
    Start / computer... the camera should be recognized as a removable
    Disc and will receive a drive letter.

    If you click right a group selected photos and select... "Send to".
    and select the drive letter of the camera... the photos are to be copied
    on the memory card.

    If these pictures have been published in some way... they probably won't
    be visible from the camera.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Camera blackBerry 10 in OS 10.3

    Hi team,

    I want to some cam options that are in OS 10.2 and 10.3. they are

    1. in normal mode, I can take a blink of an eye by touching anywhere on the screen. I want to go back (to 10.3 its taken away and given a tap point.).

    2 stabilization mode has been removed. Please add it to OS 10.3

    Need a newer option in OS10.3 is that I want option Panorama for cam before also.

    Thank you

    Girish.

    for selfies, I see most of the people using the volume button keys.

  • BlackBerry Q10 NFC file share WiFi problem between camera <>- Q10

    Hello people,

    I am an Olympus camera with photoshare WiFi NFC functionality. I can't make it work with the Q10.

    Side of the camera: WiFi enabled - the display shows an NFC Tag and also provides instructions for the manual connection.

    When I scan the tag with smarttag I get this string "OIS1,CP1%1H1UOP+++Y//,%*Z-+-X$" and Q10 wants to search in google (LoL)

    So, I set the WiFi connection manually by following the instructions in the camera. Q10 make the connection, but warns an Internet not available with it. The use of the camera says the files are in http://oishare/

    No matter how I try to enter this link http://oishare/, Q10 guard send to Google where it get lost in the translation.

    Someone figure that one out?

    Thank you people

    Wire update

    Network / Mobile network should be disabled (at least data) in order to access the http://oishare/

    Then I managed to see the directory structure, but I couldn't find any pictures on the camera.

    Later, I found some instructions in other forums to Sideload the client Snap Google play.

    With a Google account game in hand via the snap, I downloaded and install the Olympus Photoshare application.

    The app installed correctly and has its own NFC function compatible with the camera scan NFC tag.

    I was then able to export images to the Q10 and even remote control the camera.

    Pretty cool.

  • "Stop IMAQ" takes 10 sec to run and consumes 100% of CPU

    Hi, I'm calling IMAQ stop to put an end to an acquisition, but it consumes 100% of my CPU and takes 10 sec to complete (all your 100% CPU).  In our application, we have start and stop the device regularly, and that's exactly when the user wants the program is interactive, if this delay of 10 seconds is great irritation to them.

    My setup is - camera scan online Dalsa Piranha, RT 9 running on a desktop PC (it is compatible according to the test), PCI-1429 cameralink map.

    Any help or comments welcome.

    Thank you.

    Ah, I managed to solve it, but first, here are the answers to your questions:

    With the help of Stop and then close or simply close makes no difference.  The judgment takes so long that I just used a probe before and after on the cluster of error and with function of probe of 2009 timestamp I could easily see how long it took.  For a more detailed analysis of the time I use the United States available with RT timer

    Anyway, the way I solved the problem was ensuring that I stop acquisition BEFORE the clock of the camera line is stopped.  So stop IMAQ probably wait for the end of the current frame before returning - and if the clock of the line stops at Midway through a framework (as was the case), a timeout of 10 seconds causes probably Stop back later.

    The clock of the line is powered by an acquisition of data (via RTSI) card and I simply closed the session to this counter after calling IMAQ stop.  Data acquisition interface is not displayed in the example above, as it is coded in an another vi.

    Thanks for all the help.

  • get a copy of Vista OEM or reinstall an ACER laptop.

    I have a situation, where I'd like to perform a recovery on an ACER laptop to restore factory settings, however I have no CD to go with it. I have a long history here, perhaps someone more familiar with laptops and Vista installation can suggest where to begin the search, or the place where process? I am VERY familiar with the repair of Windows 95, 98, 2000, and XP is installed on desktop computers, but you don't master with Vista. I also have little experience with laptops and am not sure if the laptop has a recovery partition which can restore the factory settings or if it's just a thing of emergency repair, as my investigation into what was wrong with the laptop was a little weird. I'll do a post that is a bit of a long story, but it should show my process of thought as well as my skill level. I spent

    A knowledge of my friends has recently undergone a crash of hard disk on his laptop computer, although he didn't know exactly what was the problem at the time. Fortunately there is nothing on the drive that does not saved except for the OS.

    At first glance, it appeared that the hard drive was bad, and he went out and bought a new laptop. Outings, I was informed about this and they asked if I wanted this one for parts or to try to fix it if I could.

    After receiving the laptop, I decided to check what was wrong. I tried to turn on immediately, before even to sort out the power cord, but nothing happened. He was dead. The laptop was unused for several days before being delivered to me. Thinking that was the problem, I have dispaired that I never changed a power supply in a laptop. However, for the heck of it, I plugged in the power cord and to my surprise, it started. This dead battery may be important later.

    He has been starting some sort of partition repair which gave me access to repair system I since lost access to. The thing was, when I got to the screen that says "System Recovery Options" with the "motor load' and 'next' boxes at the bottom, no OS installs were neither were all partitions.

    I got to the menu where it gave me options, with "command prompt" downstairs. I just assumed it was like the XP Recovery console and I tried to use it as such.

    They gave me a "X:\windows\system32" prompt, which I thought was weird, because it's the X drive instead of drive C. The people in question can barely use a computer, so they would not have reassigned the drive letter.

    I did dir c: and had an error on drive c. be corrupted. Also, I did a dir d: and get "file not found" that seemed weird. It turns out that the E drive was the dvd - rom, then I discovered. Other letters gave errors and invalid letters.

    I decided to start with the basics, and I used the command chkdsk on drives C and D. To my surprise, that seemed to do the trick, and after restart I was taken in the Welcome screen.

    Restart at first seemed to be a mistake, as I have since not managed to find a way to return to this menu of repair and subsequent attempts through the Vista Start menu (or whatever you call the menu that is displayed when hitting F8 these days.) Its name has changed between Windows 95 and xP) need the administrator password.

    I was to call back them and get the password from them, and I'd have to try to use one of the solutions 'password lost admin, cannot connect', I didn't know if it would be a good idea on a potentially damaged system of mud autour with registry hacks.

    At that time, it was late in the day and I had a few other things to do. I decided to start with Windows Defender antivirus scans and the tread Micro antivirus, that have been installed. He had a subscription to the microphone of the tread, so I connected the laptop to my programmer, updated definitions and performed a full scan.

    The two negative came scans, with the exception of a few tracking cookies. At this point, it was late and I was tiered, so I all stop and went to bed. I had disconnected the laptop to my switch and it sat in my bedroom next to the bed.

    Around 01:00 a.m., I was awakened by a strong and heard the WHIR of the laptop sounds beep. The computer had apparently turned on, but when I opened the file, the screen doesn't have to turn on. Think of some sort of virus or Trojan was at fault, since a disconnected laptop should be on NOT himself in the middle of the night, I hit the power button to turn it off, and he succeeded.

    In the morning, I tried to install malwarebytes and run a scan and it found several things he called Trojan horses, as well as some adware. I removed it.

    I have found it useful to keep on the laptop, and rather than to try to clean it up, I would like to reinstall from scratch.

    I looked on the internet and found that most Acer laptops should have their accessible restore partitions by pressing control-f10 or alt + f10.

    Here's the strange thing. I did, and it started working. However, I had a Windows XP startup screen and it says "Windows XP".

    The laptop is running Vista Home Premium, and there a House premium sticker product key OEM on the bottom. If the recovery partition installed XP and asks me a product key XP, I'm GROUND.

    I have an OEM copy of Vista, but it's for a 4200DX gateway. Somehow I doubt that it will help you for the upgrade of the Vista laptop. Any suggestions?

    Jumped the gun in the abandonment of the XP, need it install Vista?

    The laptop is an Acer Aspire 5570Z according to the engraving on the front.

    On the back it says:

    MFG. Date: 0706 Aspire 5570-2067

    Yes, suggestions? I could try to clean install, but it is probably better to start from scratch. On the other hand, have XP is probably a better choice, because the laptop has only 1 GB of RAM. Possibility to choose, I would choose XP on 7 or Vistafor this computer, but which leaves me with the problem of a product key.

    If the recovery partition is indeed a XP product key, is it possible that Microsoft would leave me to transfer the license from a dead Tower brand OEM copy of XP home to this laptop? I doubt that the key of this death dell sticker product could work on this laptop, but it would be worth it. I need a new key, and they could indicate the old key as invalid with Windows Genuine Advantage and refuse to turn it on.

    Suggest that call you Acer to see if they can make any sense out of it.

    Some restore partitions when launched as the emachines PC (I fixed in the last days) installed XP preactivated and no key was needed.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Contacts transfer blackBerry 10 Android without BBID BBM

    Hello. I know that this question has been asked a million times, but none of the proposed solution has worked, if...

    My mother has an old Blackberry "BOLD" (running OS 6 I think) and she recently bought an android phone. She didn't sign with a BBID in his old blackberry, although she has a BBID to its android app. I'm afraid if I sign with the BBID on the old blackberry, I won't be able to synchronize his OLD contacts, instead I will overwrite the old contacts with the contacts in his android (who has maybe 3 people, as opposed to 50 +)

    I tried to save the contact and got a file with which, but I don't know what to do with it, because there is no option in the BlackBerry application to import contacts.

    Just to be clear, it's BlackBerry Messenger, not the telephone contacts contacts. I managed to import the .vcf, fortunately.

    So I guess my question is:

    1. If I log in on his old Blackberry with a new BBID, he replaces his old contacts with its new contacts? It will be able to sync his old contacts to its new BlackBerry application?

    2. how to import a file with which to BlackBerry app?

    Or if not, if you know another solution for this, I would be really grateful.

    Hello monogatari.

    Please let me first summarize.

    The situation is the following:

    • on an old BBM on the "BOLD", there are more than 50 contacts. that BBM is a version without BBID.
    • on a new BBM on the Android phone, there are 3 contacts. It is related to a BBID, let's call it BBID1.

    Your mother wants to get in the end 53 contacts on his BBM on the Android phone.

    is that correct?

    *****

    If so, here's how I would do things. Two proposals.

    The backup can be restored only on older versions of BBM for BBOS. Especially not on BBM for Android. If this doesn't get you anywhere.

    solution one.

    1. using the "BOLD", open each contact and view their QRCode.
    2. Use the phone Android, in BBM, add the contact with the camera scanning the QRCode.
    3. Repeat for each contact.

    If for some reason you cannot view the QRCode on the "BOLD", then you must update the BBM version on it.

    two solution.

    1. create a new BBID2 (for example using the browser of your "BOLD" or a PC)
    2. install blackBerry World, this should also install the application called "BlackBerry ID".
    3. BlackBerryID installation and BlackBerry World, install BBM.
    4. engage with solution 1.
    5. I advise you to keep BBID2, even if you do not use.
  • Camera HDR-AS50 disconnects right after that QR Code is scanned

    Hello

    I have problems connecting my new ActionCam AS50 on my Android (Samsung Alpha) phone.

    Steps to follow:

    (1) first of all make sure that WIFI is on in the camera.

    (2) then I scan the QR code.

    (3) it asks me to connect. I say ok

    (4) it is said connection and turn for a while.

    (5) then he said: DISCONNECTED or failed to CONNECT.

    How to make this work?

    You scan the QR - Code and then go to the settings of your phone.

    Search you for WiFi hotspots and select one that has your camera model name in it.

    Then, you paste the string of letters and numbers in the field password and connect to your camera.

    After that, you open the application again.

  • Why not show all the apps the camera? IE Panorama

    On the use of the camera app on a new mini iPad with IOS 9.2 installation of Panorama is not displayed, while all others are?

    Hi Geronimouse,

    Welcome to the communities of Apple Support! I'm sorry to hear you are having this problem with your new iPad. I'm a bit ambiguous about exactly what you see or if you have an older version of iOS, but camera options are displayed a little differently in iOS 9. For more information about the options, but also how to select different camera modes, you can find the next page of the useful User Guide:

    Take pictures and videos - iPad User Guide

    See you soon

  • QR Code Bar Code Scanning App camera Stock G4 / more

    Moto G4 more Stock camera app able to scan the QR Code / barcode?

    Yes, he does.

  • an anti-virus scan windows came with the windows updates.how can I get rid of him?

    the anti virus scan window comes more update as well as the security already updates.i have avast.and when I was all he said he wants to sell me the already has product.i of antivirus software that say my computer is clean and safe.the windows antivirus told me that I have several infections.i know this isn't true.but I still can't install the security updates without having to install the windows antivirus.How do I remove the update?

    No, it came not with the security updates. These are malware that came in a different way. Scan your system with anti-malware/anti-spyware programs.

  • my computer is very slow and the sound is crackling and move icons on their own i have norton security and scanned and it came with a few flaws, but has not yet sorted

    my computer is very slow especially on the startup sound is crackliing and when you watch videos it jumps a little icons often have moved when I start I have norton security and it did an analysis complete and it came with a few things but has not yet sorted

    Hello

    Try to update norton antivirus defination files and run a full system scan in SafeMode (http://support.microsoft.com/kb/315222).

    I hope this helps.

  • "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

    A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
    I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

    A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

    I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

    An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

    I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

    I'm going nuts trying to figure out this one!  Thanks for your help.

    BT

    Update:

    I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

    Problem solved.

    Scan of stupid...

    BT

Maybe you are looking for