PAP2-T falls asleep after about 24 hours of no use

I bought the above week last for use at home.  It seems to work well, except that I noticed he falls asleep entrant if if is not used for 24 hours. An outcall seems to repair or reset power. When a call is incoming there is no rear ring of the carrier and after expiration of the timer of the CFNA, the call goes to voicemail of carrier.

The version of the software according to the info field is V3.1.15 LS

I took the PAP to work where the problem is more serious.  It stops the receiver receives after about 30 minutes.

At home and at work to make sure it wasn't me I tested with a NEC PBX and a method V90 SIP fone with no problem and no problem sleeping. Anyone got any ideas?

Thanks for the info.  I made the changes.

Will let you know the result...

Tags: VoIP Adapters

Similar Questions

  • my computer goes to sleep or hibernate after about an hour of non-use. How do I prevent this?

    Press a key on the keyboard does not return system

    Hi Steveo11,

    Thanks for posting. You can disable hibernation through your power options in the control panel.

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Drive HARD keeps falling asleep after a minute on my Satellite M40

    Satellite M40x-175.

    I've updated the BIOS with the latest version (1.60), and since the disc hard continues to fall asleep after a minute, no matter the power Windows or Toshiba Power Saver Settings.

    Toshiba will be out an updated BIOS update soon?

    Help, please.

    Hello

    I put t think that it s a bad BIOS function. As far as I know in the BIOS, you can change the settings for the HARD drive. Please check. Moreover, Toshiba Power Saver disabled power Windows settings. Have you checked the parameters of energy saving modes?

    Good bye

  • I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

    I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Hello

    You need to support iPad not Microsoft.

    iPad - media choices
    http://www.Apple.com/support/

    iPad - Support
    http://www.Apple.com/support/iPad/

    iPad - communities (Forums)
    https://discussions.Apple.com/index.jspa

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I am tyring to update my iphone and after about an hour, it gives me an error message saying: the network connection has expired.

    network connection timed out

    I am tyring to update my iphone and after about an hour, it gives me an error message saying: the network connection has expired.

    Hello JennySellars

    Your question would be better asked in the iPhone support communities in the link below. Thank you.

    https://discussions.Apple.com/community/iPhone

  • I just installed a new windows 7 and I've activated. the system crashed after about 3 hours of my activation. How to get back my activation and product key?

    I bought a genuine Windows 7 starter edition and installed in a system. After the activation of Windows, the system crashed about 3 hours later. now I am confused on how to install the same window with the same product key in the same system. Help, please.

    Where is "here"?

    Then just re-install the same way as you did initially.

    I don't see what your problem is...

  • First active CS6 in the bins disappears after about 2 hours of editing

    I'm having a recurring problem with CS6 first - after working on the project for about 2 hours, all of a sudden the bins are empty.  None of the property that I imported appears in stores - very disconcerting!  I save the project, closing the first, then reopen and it's all there, all the bins come in charge with assets.  Really, this slows down my work flow and seems to happen more often.  Stores always appear but there is nothing in them - the project is not yet for the media are there somewhere - I just can't access.  I tried to import new media when this happens and it does not matter.  Someone had this problem?  Don't you think that it is a Windows problem?  Use the latest Windows OS 8.  Thank you in advance for any advice you may have!  Jennifer

    Is the search field empty when this happens

  • 40 Firefox fails to load the pages after about an hour of use

    I have followed all 7 steps and added suggestions to https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems
    but none solves the problem. FF40 works after you restart the computer, then don't load/refresh pages (get the circle anti-clockwise spinning gray or blue rotation circle to the right). Every difficulty that I can find on the pages of Firefox support, I tried, but nothing works - including relocation, etc. Help!

    P.S. If everything OK, I will very happy also click "solved the problem"!

  • Satellite A110-149: the battery is empty after about an hour

    Hello
    I bought a satellite A110-149, but I'm worried for the battery as in only 1 hour or a little more, it is already empty. Is this normal?

    If I let my laptop connected to an outlet throughout the day, this can make my battery less efficient?

    Thank you!

    Hello

    Laptop battery of specification of the run time is until 1:45. But I think it is quite unrealistic. Battery life depends on many factors like the profile selected in the intelligence tool, run the applications and processes and perhaps the use of the optical disk drive.

    At the end I can tell you that there is no problem and this time rung is normal for this laptop and battery 4 cells.

  • After a one-hour FF starts using up to 1.6 GB of CPU

    This has happened for a long time, but it's really annoying. I have to restart firefox all the time. If I don't it will just crash. The cpu usage goes up to 1.6 GB and be generally more then 2 tablets, it is really slow [even with the low use of the processor 200-300 MB].

    Yes, I've read all the help topics and did what I could [ago], but if other things become worse. I can't really use it for all the things that I need, and there is always a chance if lose me all the messages I write because of the crash problem.

    Any help would be appreciated
    Thank you
    CRDF

    P.S. When you connect to post this topic would be nice if, after you have entered a wrong password log-in window (not the intruder window) are left open.
    Recently, my FF crashed and the info was lost. I had to create a new profile and substitute the information from the old to the new. Opening of the old profile has failed. I did not press all the shortcuts, FF just crashed. That's corrected now, but I am just informing you.

    Thank you. I did this and it was much better. I activated some add-ons now and it's still not too bad (although it is up to 500 MB at the moment with only 3 active modules) when I find that the extension has been the cause of the problem, should I notify the creator of it?

    Edit: Add the block more seems to use a lot of memory. Edge of Adblock, works better.

  • XS708E super hot race and crashes after about 2-3 weeks of use

    Hi guys,.

    I installed the XS708E at home for my home enterntain system. I have reaised the switch may become hot after a while. The switch is installed in an open space where it is well ventilated. I realized that the perfomance of the switch slow down with time and ends by crashes. I'll then have to turn off the switch for 15 minutes so that it can cool down and then turn it back on. I realized that I need to do it once every 2-3 weeks.

    Is this something in common?

    Thanks for the update. I'll be following up with Amazon.

  • my computer is turn off and gets very hot after a half hour

    for some time my computer is to do really hot after half an hour when im using it and then after a few minutes its deactivation and I have to wait like 20 minutes because he does not want to go back. It has been like that before, but it's only like 4 times... but now for 1 month it turns off... Please help me.

    Hello

    Question of heat and ventilation. If a PC remove ALL power and reinstall the cards memory and cables (both
    in fact, ends) - remove and replace them - are not just tight. Try adding a small fan blowing in or
    through the ventilation openings.

    If those who don't erase the question that you should seek immediate help from a real computer (no leeks store
    and the glances at a BestBuy or other big box stores) or the manufacturer of your system Support.

    Heat can cause very serious problems with your hardware in order to not try to solve this one more
    minimum without professional technical assistance.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Z10 blackBerry dead after only 5 hours battery

    I don't want happened to my Z10, but after only 5 hours and no use a fully charged battery is dead. I bought a new battery but no change. I wish there was an option to completely reinstall the operating system. I have installed all apps

    Always start with a battery pull when something goes wrong with your phone.  There could be something in the operating system that is not aware and a battery pull will often correct this.  To make a correct battery pull, remove the battery while your phone is on, then replace it.

    I hope that helps you.

  • T400s camera stopped working after about 2 weeks

    Got a new T400s, well worked out of the box.

    After about 2 weeks, do not use the camera (of course, I checked, it works when I install everything first) the camera no longer works.

    He appears in the Manager of devices, but Skype and other software just to see a black image. The LED on the side, which according to me, shines green when the unit is supposed to be consulted running is no longer.

    Installation of the driver and going back in time (recovery point) makes no difference.

    I really want to reformat the drive, there are a ton of my files on it...

    ideas?

    Ok

    I contacted local support and they wanted me to come and check the camera themselves.

    In preparation, I removed the extra 1 GB of memory (3 GB total) I had installed and tried again just before departing for their labs.

    Guess what, that fixed it for me!

    It seems that this model has serious problems with asymmetric memory facilities. I installed a 2 GB module and some of the other problems plaguing this unit had disappeared too (VT - D causing disruption of the screen and also occasional freezes).

  • Windows Update crashed my computer, sending me into the 'frustration after the reboot loop.' I use Vista, by the way. (Even worse!)

    Hi MS. victims (be strong!)

    I have the same problem about the update of windows. What happened was that I had put just internet access at home, so I was invited later to "new windows updates available" so I agreed. After about an hour (because he was that much) it was done and was ready to be restarted. so I restart my computer without hesitation because I had already created a restore point. The Blue Screen of Death. so he started to happen... the "loop." no Safe Mode. no last good configuration that worked. No command prompt. none worked. I mean, it's just bad.

    Victims of the SP, please help. I use vista, by the way. even worse!

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for