Paper size HP OfficeJet 7500 has large Format - custom printing

I am a collector of stamps and create all my own scrapbook pages.  I use the white pages of a well-known stamp album manufacturer (lighthouse, Germany).  The pages are 10.625 "x 11.7".  How can I set up my printer to print correctly on them?  I don't see any option for custom paper, even if your listing online says that he accepts custom formats.  What should I do?

Thank you

Lloyd Thrower

I found a solution.  The height of my pages are the same as the width of A3 pages.  So I have 1) used for the adjustment of the A3, 2) turned the page in landscape mode and 3) only used the 10,625 left inches of the page.  It prints perfectly.

What I learned from this is to think a bit off the beaten path.  If the paper size is not supported, find one that is, which can be changed.  It must be greater than what you use - but not too big or you end up with too much adjustment.

Tags: HP Printers

Similar Questions

  • OfficeJet 7500 has large Format: color printing

    I had a lot of trouble with my printer.  I went online and made the diagnosis, I uninstalled and reinstallled the softward of the original disc.  I now have it print black from the internet and make copies in black and color, but it will not print in color from the interenet.  There's just nothing... no error message, just nothing.  Anyone know what is happening?

    Hey @AlexandraC!

    Thanks for getting back to me!

    I see that the issue is not yet fixed, but you are able to get a test page to print!  That is great news because you now know that there is some sort of communication here.  I'm sure we can get this resolved!

    You can try changing the print using your printer driver is to the other.  To do this open the "Devices and printers" in the start menu.  In devices and printers, right-click on the name of your printer and go to "Printer properties" in the menu in the menu dropdown.  Click on the "Advanced" tab and click new driver.   Click on "next", on the left side choose HP and sideways right choose HP Deskjet 9800.  Click Next, finish and then try again to print your documents.

    I would like to know how that works for you!

  • OfficeJet 7500 has large Format: installation without screen wireless

    I just moved to a new House and the need to set up a new IP address on my HP printer, but the touch screen no longer works.  Is anyway to work around using the printer configuration wizard?

    OK, it would have not supported for the specific model... try the following solution:

    1. Temporary plug in an ethernet cable from the printer to your router or directly to your computer, then let a minute or two to get an IP address.
    2. From your PC, open 'Computer', then click on 'Network' in the left pane.
    3. Locate the printer listed, right click and click on "view a Web Page, the EWS interface opens.
    4. Open the network tab.
    5. Within the wireless Section, click Wireless Setup Wizard and follow the steps to connect the printer to your router.
    6. Once you are finished, unplug the ethernet cable and allow it a time to connect to yoru wireless icon.
    7. In the HP software select Connect a new printer and follow the steps, the printer should now be detected.

    Please let me know the results,

    Shlomi

  • OfficeJet 7500 a large format does not connect via Timecapsule

    I have a Mac Book Pro running Mac OS X 10.7.5 (just updated all the software).

    I connect my MacBook to the internet through my Apple Time Capsule (wired connection). I use version 6.1 (610-31) Airport utility and I just updated the version of the firmware to 7.6.1

    I use a local wireless through my Time Capsule.

    I just bought a large format HP Officejet 7500 a (model name: C9309A).

    The printer has been set up to detect my wireless LAN and initially he worked for printing and scanning, but it has recently discontinued. I tried to uninstall (purification) the software of my laptop HP, all my software update and reinstall the HP software on my laptop, but it still does not work.

    The printer is connected to my time capsule via an ethernet cable and a USB cable. It also includes Wi - Fi connection generates my time capsule. I have preferthe printer plugged into the router (time capsule) rather than a WiFi connection I print large files.

    I can install the printer on my computer mac laptop (settings/printers & scanners). I added it as a wireless and a wired connection through my time capsule (it shows that the connection is done by the time capsule). However when I print, there is a long delay, the printer now says "printing", but I get the error on my laptop screen "can not write print data: ÿ * xˇ.» A few minutes later a blank page or a page with a single line is ejected from the printer.

    If I go into the configuration of the HP printer, it says I'm under pilot 3.4.1. If I try to open the printer utility I get a message "utility HP does not work with the devices connected to the airport. Try to connect the camera directly to your Mac to work with her. " I tried to connect directly to my Mac via the USB cable and which does not work either. I prefer that the printer is not connected directly to my laptop I have few USB ports.

    In my view, this printer is supposed to be compatible with my system.

    Is there something more, that I can do or this printer is not compatible with my MacBook Pro or my Time Capsule?

    Hi marion_13,

    Turn it on wireless and then try to access the EWS - embedded Web server by typing the IP address of printers in the browser's address bar Safari. I would like to know if you are able to access the built-in Web server?

    Document below will also help you get the printer installed on your wireless computer.

    http://support.HP.com/us-en/document/c02239420

  • My printer is a HP Officejet 7500 a large format e-all-in-one printer-E910a.

    It shows a general error on the screen # 0x610000f6. And that's all that. How can I resolve this error and make some impression

    Hi @Aroo

    Usually the 0 x 6 * errors point to a carriage jam. Please use the following document to solve the problem; ' A 'carriage Jam' or ' 0X610000F6 "message for HP Officejet 7500 (E910a and E910c) a large Format e-all-in-one printers.

    If the problem persists, I suggest that we call. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide. Even if the printer is out of warranty, I recommend calling that we might be able to offer a discount on a newer model.

    I hope this helps.

  • OfficeJet 7500 a large Format

    The HP printer is HPA9485 (HP Officejet 7500 E910).  The computer indicates that the printer is not on ahd the printer has ALL the buttons and the flashing screen elements works quickly in unison.  If I push the power button, the printer through its diagnostics and then continues to blink.  If I press and hold the power button, the printer stops.  When I power on, the printer goes through the diagnostice and flashes.  Printing what is empty.

    Hello tbendorf,

    Welcome to the HP Forums.

    I see that you have a problem with printers all the flashing lights.

    You see all the error codes or error messages on the printer?

    First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    Please write me back when you have time and I will be happy to help you.

    See you soon,.

  • Error message Scanner HP 7500 has large Format

    I have a 1 - year, 7500 HP all-in-One printer/scanner/copier/fax.  3 months ago the bar scanner has started making a grunting noise when its start and restart and then suddenly stuck.  I have fiddeled autour and I've tried doing a hard reboot by pulling on the power cord for a few minutes then reconnect back.  That did not help.  I discovered that in now the power button so that the printer was ON that unit would apparently do a reset and recycle itself before working once more perfectly.

    Tonight, the same thing started happening for no rhyme or reason but this time or unplug the unit or hold the power button causes the unit resets automatically and the unit is practically useless to fill the functions going included simple impression.

    I'm somehow missing a step in the process of system reset I forgot?

    If please advise if I can get this and works as soon as POSSIBLE, I have a ton of stuff to generate for the IRS taxpayer lawyer unit!

    Thank you.

    Hi gregscher,

    At this point, we have exhausted all the available troubleshooting options. I appreciate your persistence, even your will to leave the hammers and power tools! I wish I could say that would help!

    You can either use the printer as printer only, or call HP HP. might actually be able to offer a discount on a newer model. If you are interested in discussing your options with them, the number to call is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  • Custom size paper will not feed. OfficeJet 7500 has a broadsheet.

    • OfficeJet 7500 a large Format
    • Prod. # C9309A
    • Windows 7 64 bit

    Try printing on paper 3 3/4 "X 6 3/4" (95 x 172 mm). 98% of my attempts, the book is not picked up or jams immediately. All attempts to set the guides and performance white paper, the same results. Appreciated recommendations.

    Hello

    The 7500 has support not all sizes on your operating system:

    Custom-size media is not supported in Windows.
    

    You can find all supported paper size in the paper specifications below:

    http://support.HP.com/us-en/document/c02283601

    You can try the No. 6 3/4 envelope size and check if this can work, it seems to be close enough to the mentioned size

    Good luck

    Shlomi

  • Printer large Format HP 7500 has: OfficeJet 7500 has quit the connection during the scan in VueScan & Mac OSX 10.10.1

    The scanner interrupts the connection of WIFI halfway the scan. I can scan sometimes two or three pages, and then the next page will scan only partial and the connection is abandoned - typically freezes application (VueScan), while the scanner window indicates that the analysis is ongoing. If I wait until the scanner end I get only part of the page, with the background that half left in white.  That is what it is? Is the problem with VueScan, Mac OSX 10.10.1, OfficeJet 7500 or my WIFI network?

    Thank you!

    My system: Mac OSX 10.10.1

    VueScan 9 x 32 (9.4.59)

    iMac 2.8 GHz Intel Core Duo (24 "beginning 2008)

    6 GB Memmory 800 MHz, DDR2 SDRAM

    HP 7500 has large Format Printer/Scanner (model E910a)

    WIFI modem: Cisco 3825 DPC

    (Shaw CableVision/WIFI modem)

    Hello

    What happens when you scan from the HP or Capture of Image scanning software, you see similar problems?

    In the affirmative, please let me know because it wil require to solve any problem of connectivity to the printer.

    If everything works with software such as HP can happen due to any problem with VueScan, such I would say contacting VueScan at torubleshoot because they are more familiar with their product.

    Please let me know the results,

    Shlomi

  • Borderless printing problem HP OfficeJet 7500 has

    This printer is supposed to be able to print prints borderless up to A3 +.

    However the paper list does not show option A3 or A3 + no border

    It shows A4 and legal "edge to edge"

    If I choose A3 A3 paper I get an inch border shift

    Can someone help me with this please

    HP OfficeJet 7500 has wide

    Windows 7 Ultimate 32 bit

    I have a problem with my 7500 has wide, whenever I try to print without margins A3, jams. Not the normal case A3, A4 or same A4 borderless. What is the problem? What is the hardware problem?

    Concerning

    Angus

  • OfficeJet 7500 has 910: officejet 7500 a E910a

    I use Mac OSX 10.10.5 - they have more a driver that will support the officejet 7500 has 910.  Y at - it a fix for this.

    Hi @adiedrichsen,

    Welcome to the HP Forums!

    I see that you are looking for a driver for your printer HP Officejet 7500 a E910a on Mac OS X 10.10, and I'm happy to take a look for you!

    There is no full feature software and drivers available directly from HP on this printer and operating system.

    However, there is a driver by Apple which gives basic printing and scanning capabilities, you can download this driver by accessing this Web site, HP v3.1 for OS X printer drivers.

    Scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. That applies to your printer and your operating system, as well.

    Hope that answers your question and have a nice day!

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  • Black line copy/scan number Officejet 7500 has

    OfficeJet 7500 has. When do face or scanning through feeding, copying or scanning has a vertical line from the top to the bottom, near the Center. When explorations or copies are made from the plateau, this line does not appear. We have cleaned the rollers and separator, but we always get this line in the middle. There is also no line when we print from the computer... Please advise as this is a brand new computer.

    Hello Ivrwm

    I hope that your trade goes well. If you have any other questions please post back.

  • Message ' load paper ' wrong on Officejet 6500 has more

    I get a message ' load paper ' on my Officejet 6500 has more.  When I first got the printer and installed with my office, it does the same thing, but he stopped after a download from HP.  Today I installed it on my laptop, and now it gives several times the same message despite that I have loaded and reloaded varying amounts of paper.

    Windows 7 64 bit

    Hello

    This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

    http://goo.GL/NeUWY

    Good luck!

  • OfficeJet 7500 has E910: error scanner E910 Win7 Officejet 7500 has "not detected any computer" & Doc printer/Scanner has no help

    I just moved my printer/copier/scanner/fax, E910 Officejet 7500 has on one side of my office to another.  In the process the power and USB cables have been disconnected.  Same USB cable as before, connected to the same port on the computer.<3 meters="">

    Re-installed software CD.   Downloaded updates.  Several files in the HP folder are displayed with today's date, so clearly that something happened with the update.

    Printer is now recognized and will display the files on the computer.

    Photocopier creates copies.

    ... Scanner not scan.

    When a document is placed in the tray sheet or on the glass, "no computer detected" error message is displayed on the HP device.  [Note: this computer can send commands successfully, if clear communication goes]

    On the computer, when the devices are searched and displayed, the HP device appears with any other printers/Fax.  Scanner is not mentioned here - but when the details are drilled for, said that it's in the category 'printers, scanners '.

    Googling suggested tool print and scan doctor, so I went to that and downloaded.  When you click on it to run it, it says that (paraphrase) some files are missing, wants to download them (value 121 mB). So, I click Yes or then, or whatever, and it brings them.  Notice I just do a full install and updates downloaded, that more can he want?

    Then, nothing happens.  Help HP screens suggest that he must now ask me what function I want help or ink on.  Nothing, no suggestions with little green checkmarks or advice of the error.

    So I went down there is text on what to try.  Some apply - after that the doctor Download 4 or 5 times and do the suggested software download it 4 or 5 times, somehow unnecessary.  Disconnect and reconnect the USB cord - done that, at least the print function does not disappear, but the scan did not return.  Restarted the computer and printer HP - has done that, no difference.

    This is not the first time that the scanner was not updated on the computer at the other end of the cable.  In the past and it has been a while, memory, is this activation of the analysis of the computer set the scan to life function, but I do not see this option.  The computer "HP Scan" displays an error message that the HP Officejet 7500 E910 was not found, as does the Windows Fax & Scan.

    Why, if the printer can be found, and it is in the same unit as the Scanner, the scanner will not appear?

    Telephone support HP identified the problem: no drivers.  Took about 15 minutes for a useful person straightening things.

    Note that I had uninstalled the printer and its software before re - load the software.

    As part of this process, I had identified with HP via different input strings the OS of the computer and the details of the all-in-one device model number.  So why couldn't HP identify the drivers concerned and ask them to download also?

    Anyway, for now, what I need is working.

    Detective Conan

  • OfficeJet 6500 a: how to adapt a HP Officejet 6500 has so we can print on both sides

    Hello dear hp team

    I have a HP Officejet 6500 has more that color print on both sides.

    Now, I have only a 6500 a which initially can print one side.

    I changed the room in the back (I put the piece of the 6500 has more printer) so that mechanically, he has the ability to print also the two sides.

    Now how do I program the printer so that it detects that he now has the ability to print on both sides?

    Thank you for your reply and sorry for my English mistakes.

    A student of the Swiss school.

    Hello

    As suggested in the post above, only available for the printer manual duplex printing.

    The accessory of the duplexer is designed only for he 6500 more than model a, it is not intended and cannot be used with the model 6500 a, as you can find below:

    Suitable only for HP Officejet 6500A Plus e-All-in-One Printer - E710n
    

    http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E710/4083974/model/4083869/document/c02492482/

    Shlomi

Maybe you are looking for

  • ink carriage move

    I get the message "Paper jam" and will not spend my ink cart.  Solutions.

  • How to recover music uploaded previously to the library when apple music free trial subscription ends?

    End of my free trial, but I can't find songs that I downloaded during this time... I have "show music apple" checked, then the music disappear unless I sign up again? Sentence seems right, this should be the case, but thought I'd see if anyone has fo

  • Deleting a group to a TDMS file increases the file size

    Hi all I was searching for information on how to delete a group in a TDMS file. Apparently this is not a simple task as I thought because firstly, it is necessary to convert the TDMS file in a TOC file, remove the group from the TOC file and finally

  • HP home page missing

    I had my system restored a few months ago and can't seem to find my HP homepage, where the webcam. There is usually an icon in the lower left corner, and it's gone. Sure that he wiped out! Can anyone lead me in the right direction to get it back? Tha

  • EA6500 no selection TKIP or AES

    Here, I'm a bit confused.  How is this router does not allow to choose TKIP or AES. It allows only the personal WPA2 options.  So, my devices that connect to the router are all TKIP. What happened to these choices on this router? My extension that cl