Parameter is not working when you choose all values

Similar Questions

• LOV cascading does not work when you set the value of the parent LOV with DA

  Hi all

  Using APEX 4.2.2.

  I have tow LOVs

  LOV parent article is: P50_TYPE

  Child element LOV is: P50_PROJECT_ID

  In other words in the attributes of the element P50_PROJECT_ID, we have:

  > Cascade LOV Parent article (s): P50_TYPE

  > The items to show page: P50_TYPE

  > The list of values definition: something similar to:

  Select * from mytable where type =: P50_TYPE

  I use DA as run of the JS code to set the value of the P50_TYPE element

  something similar to:

  > $('#P50_TYPE').val (2);

  After doing this, the P50_PROJECT_ID element does not get updated when the P50_TYPE value changes. Namely, P50_PROJECT_ID remains empty, unless the end user manually changes the value of P50_TYPE.

  Any help please?

  Kind regards

  I had a similar experience, he expected a change event, so you can extend the jQuery to be included

  $('#P50_TYPE').val (2) .changes ();

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Question 1: The button "Buy now" does not work when you select a plan. Question 2: Can not select "Monthly Plan" for a "unique App."

  Question 1: The button "Buy now" does not work when you select a plan.

  How to reproduce the problem:

  1. go in terms of pricing and membership creative cloud | Adobe Creative Cloud

  2. choose a plan, then click on 'buy now '.

  3. you go to a blank page instead of the next steps in the payment.

  Question 2: Can not select "Monthly Plan" for a "unique App."

  How to reproduce the problem:

  1. go into "https://creative.adobe.com/plans".

  2. under "Unique App", select a product and then try to select the "monthly Plan" in the second menu drop-down.

  3. for some reason, it isn't get selected and the price is replaced with the ellipsis (...). I expect the monthly price to appear.

  Please notify.

  Thank you.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet 4630: Duplex does not work when you print the selection

  I noticed that when you choose printing recto verso and selection that one page is printed. If you choose all printing and double-sided. Has anyone else noticed this and is there a solution?

  I found the answer. I tried to print a web page in firefox. Google chrome should be used to print the fom the web.

• Narrative does not work when you create the Windows Movie Maker project

  The narration does not work

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  ======================================
  I was wondering... work your tape recorder of Windows?

  Windows Vista - sound recording
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  The following article might be worth a visit:

  How to: Add narration to a movie using Windows Movie Maker in Windows Vista. :-add-a-narration-to-a-movie-using-windows-movie-maker-in-windows-vista https://ask.qut.edu.au/app/answers/detail/a_id/4499/~/how-to.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• It does not work when you use the trigger to check the data of the other table.

  Please help me with this, I put a trigger on a table, but it can not work as I expect.
  
  case study: a class has many students, one of them is going to match.
  The purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to.
  Oracle version is 10.2.0.1.0.
  

  --table:
  DROP TABLE STU;
  DROP TABLE CLASS;
  
  create table CLASS(
  CID     VARCHAR2(5)   PRIMARY KEY,
  CNAME   VARCHAR2(20)  NOT NULL,
  SCHOSEN VARCHAR2(5));
   
  create table STU(
  SID     VARCHAR2(5)   PRIMARY KEY,
  SNAME   VARCHAR2(20)  NOT NULL,
  CID     VARCHAR2(5)   NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
  
  --data:
  --CLASS
  INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
  INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
  INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
  --STU
  INSERT INTO STU VALUES(1,'JACK',1);
  INSERT INTO STU VALUES(2,'TOM',1);
  INSERT INTO STU VALUES(3,'LILY',2);
  INSERT INTO STU VALUES(4,'DUSTIN',3);
  
  --TRIGGER
  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  
  DECLARE
  DUMMY INTEGER;
  INVALID_STU EXCEPTION;
  VALID_STU EXCEPTION;
  MUTATING_TABLE EXCEPTION;
  PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
  
  CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
    SELECT SID FROM STU, CLASS
    WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
      FOR UPDATE OF CLASS.SCHOSEN;
  
  BEGIN
    OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
    FETCH DUMMY_CURSOR INTO DUMMY;
    IF DUMMY_CURSOR%NOTFOUND THEN
      RAISE INVALID_STU;
    ELSE
      RAISE VALID_STU;
    END IF;
    CLOSE DUMMY_CURSOR;
  EXCEPTION
    WHEN INVALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
    WHEN VALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
    WHEN MUTATING_TABLE THEN
      NULL;
  END;
  /

  Just copy and paste on it and try to run next:
  UPDATE CLASS
  SET SCHOSEN = 3
  WHERE CID = 1;
  Clearly, you can't student who is 3 as to Member of class 1. Please help me. Thank you.
  
  Published by: 991096 on March 1st, 2013 02:36
  
  Published by: 991096 on March 1st, 2013 03:03
  
  Published by: 991096 on March 1st, 2013 03:11

  Hello

  991096 wrote:
  1. the purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to. Then, when I try to choose 3 student-member of correspondence of class 1, should give me "PLEASE RE-ENTER ID AND STUDENT ID AS CLASS or STUDENT not IS NOT VALID."

  Then do something like this:

  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  DECLARE
      sid_found     stu.sid%TYPE;
  BEGIN
      dbms_output.put_line (:NEW.schosen || ' = schosen entering check_schosen');             SELECT  sid
           INTO    sid_found
       FROM      stu
       WHERE     sid     = :NEW.schosen
       AND     cid     = :NEW.cid
       AND     ROWNUM     = 1     -- to avoid TOO_MANY_ROWS
       ;
  EXCEPTION
      WHEN  NO_DATA_FOUND
      THEN
       RAISE_APPLICATION_ERROR ( -20000
                      , 'Please re-enter class id and student id as class ('
                        || :NEW.cid
                        || ') or student ('
                        || :NEW.schosen
                        || ') is not valid.'
                      );
  end;
  /
  

  DBMS_OUTPUT creates only a message. The message may not be displayed, and if this is the case, then the user cannot see it. The DML will still take place.
  I used instead, RAISE_APPLICATION_ERROR to keep the DML does not happen. It displays a message like

  ORA-20000: Please re-enter class id and student id as class (1) or student (3) is not valid.
  

  ' 2 ' game ' means ' an official competition in which two several people or teams competing.

  What individuals or teams are competing in this case?
  In any case, the question wasn't 'that 'game' means', but

  Frank Kulash wrote:
  What do you mean when you say "going to match?

  I think that now you're saying that the new values of (class.cid, class.schosen) must be equal to (or "fit") some existing (stu.cid, stu.sid).

  3. thanks for your tip, I learned how to use '{code} '.

  4. it's really goes with the exception of MUTATING_TABLE. So, how do to fix the trigger to show me INVALID_STU EXCEPTION when I try to choose a student does not belong
  a class?

  Don't refer to the table of class in the trigger, and the error table mutation occur. All the information you need are in the stu table, so there is no need to query the table of class, anyway.

• AutoComplete does not work when you enter a URL

  Firefox on Fedora Linux x86_64 fc13 3.10.6. View all history shows the history of visited web sites. "Remember history", it is on. AutoComplete worked. I tried to uncheck display the bookmarks bar, but do not know if this has caused the loss of AutoComplete.

  Make sure that the address bar is not set to "Nothing":
  
  Edit > Preferences > privacy > address bar: when you use the location bar, suggest: history, bookmarks and bookmarks

  See the smart location bar

• Satellite C850D - keys do not work when you try to connect to the laptop

  First of all I would like to say sorry for my lack of computer knowledge. My C850D is only 2 months old, last night, it worked perfectly... this morning when I turn it on for my password all the keys would work.

  I'm a little angry and just reset the laptop. Still not working and even after that... one suggest why my keyboard no longer works.

  Start the laptop and try to enter parameters of BOS. You can use keyboard here?
  Use arrows and space bar to change the options.

• T440s - keys alt and space do not work when you press the up and left arrow

  Hi all -

  I just got my T440s a few weeks ago and I love it. I just discovered a weird problem: both alt keys and the space bar don't work when holding the up arrow and left the keys simultaneously. I discovered this while playing a racing game. As holder until left and arrows, by pressing the alt key or the space bar to have no effect, and the laptop makes a sound 'blip '.

  All other keys seem to work all by holding + arrows left and rising + right arrow key does not change a thing.

  I looked at the ease of access settings (I have Win7 Pro 64) and turns off all filters, sticky keys keys, etc. I use the latest version of the BIOS, if that's any help.

  It's a little boring, so I'd appreciate any help. Thank you!

  https://en.Wikipedia.org/wiki/Rollover_%28key%29#Key_jamming_and_ghosting

  Will probably not not to be repairable. Recommend rebind the keys for a game of combinations work.

• My mouse does not work when you type

  Whenever I type in Internet Explorer, Mozilla Firefox, or ANY program for that matter, I try to move the mouse, and it does not work, but after I've finished typing, I can move my mouse again. I know that this does not seem like a big deal, but when I play games like Garry Mod (I try to play often, but it never works because I use A, W, S, D to move and the mouse to look around, so I can't) I can't look around, making the game practically unusable and not fun at all. I looked on the Internet for similar problems, and some have said that it must:

  «Edit the file "/ etc/default/mouseemu" and put 0 instead of 300 online»

  Code:

  "TYPING_BLOCK ="block - typing -"300"

  Make sure to uncomment the line by deleting the symbol #. Finally, restart mouseemu entering

  Code:

  sudo /etc/init.d/mouseemu restart

  in the Terminal. (http://ubuntuforums.org/showthread.php?t=353162) »

  I don't know what it means and if someone can help me in some way, it would be greatly appreciated.

  Thank you

  Sincerely,
                                         
  Alex H.

  I can't comment on the proposed amendment that has been given.

  I guess you already checked the mouse settings in case there is some fantasy in this utility who think you want that he disabled this way.  I can't imagine what that but there might be something that hides the mouse during the strike that is defective.  Disable all suspicious settings & try again - you might need to reboot to get a reliable result.

  Initial checks, I would say go into Control Panel, Manager of devices.  Search for all the warnings on the mouse & the video adapter.  Update their drivers [right-click, update drivers].

  If this does not work then check the compatibility of Windows http://www.microsoft.com/windows/compatibility/windows-7/en-gb/default.aspx and check to your PC & manufacturers of mouse support sites for advice, including Windows 7 tips & updated drivers.

  If this does not fix it then confirm the list of controls that you did & results back here.  Include your brand-model-version PC, the mouse brand-model-version, the version of Win7 & x 32 / x 64.

  Good luck with it,

• User and password do not work when you try to download the new Flash!

  I can't download the new Adobe Flash Player because my username and password do not work.  I changed and tried again without success.  Please tell me what I'm doing wrong!  Adobe Flash is not taken in charge by the Adobe customer service and their 800 number does not work correctly.  I can't view my Jacquie Lawson e-cards and play games.  Thank you!

  First of all, download, it's what you do to transfer a file FROM your computer TO a web site... I think what you mean is that you have a problem with INSTALLING a program

  When you install or update, it's PROBABLY your operating system for you to prove that you have by asking your COMPUTER, not your Adobe https://forums.adobe.com/thread/2139902 password password

• Police will not change when you choose to search for a font

  Hello. I'm on a MBP with InDesign CC.

  I opened a document that uses Frutiger 57 condensed. The original file used the same font, but the name of different fonts, e.g. "Frutiger 57Cond.

  I thought that the problem would be in one of the styles, since there is no character styles, I went to paragraph and changed styles police for Frutiger 57 condensed from the Frutiger 57Cond, but that did not help. Frutiger 57 condensed is installed on my system, that's why I made this change.

  Under find fonts Frutiger 57 condensed is selected, but when I click on the first series of text that uses it, it will not change the police. If I choose all the changes, nothing happens.

  I tried to copy and paste everything into a new document and preflight gave me the green light, but when I have opened the folder, I got 61 errors yet. I thought I'd try!

  When I open a new document and start typing in this font, everything seems fine. There are several InDesign documents that use this font that also do not have the problem.

  No idea as to why this particular document send me questions of police? Please let me know if there is something I can check

  Looks like you have some fonts in a folder of fonts in the document.