Parameter problem to the airport Time Capsule

Similar Questions

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• How to free up disk space on the airport time capsule?

  I want to add a new macbook to my time capsule 2 TB airport but I get the error message "needs space". Is there a way to free up space without erasing the whole time capsule?

  Only by deleting the files in the backup itself. If you use Time Machine, then you'd that uses the Time Machine application. It would be much easier to erase the drive in the time Capsule.

• Failure of the airport Time Capsule?

  I have a Time Capsule from Apple Airport – 2 TB (ME177LL/A). Today, I was unable to access the drive in the finder for the first time. The airport icon does not appear in airport utility. More than a month, no real change in my machine, no new installed apps, I've upgraded to El Capitan. I did some research on Google and found the only real option for me (after a power power off to the airport and my machine) is to reset the router to factory settings which I seem to have done. In addition to killing the wifi (which was still working before reboot), the Airport now appears under the button "other Wi - Fi devices (1). But whenever I select which and it attempts to connect (so I can probably do a manual installation) it fails and merely says that an unexpected error has occurred. I don't know if I lost all my files on the disk, since this seems to be a failure any which allows to treat the router itself. He was still working as a bridge providing internet and Wi - Fi before the reset, now it only provides internet for everything that it is hooked up via ethernet.

  I had some of my gripes with this product over the years, but the lack of diagnostic information is now slightly irritating. Is there something else for me to do a short delivery to another zero?

  First of all... no files will be lost on the hard drive... for this, TC would fail to start or have a disk failure error...

  Your questions are totally El Capo... and pretty typical.

  Why should he choose now occur instead of a month ago... done installing part of the pleasure of the wireless network adapter... It's frightfully little reliable.

  I want you to do it again... Yes I know.. Sorry...

  Disconnect the TC of the network and plug in ethernet on the computer... However leave the radio on... Apple depends on increasingly less reliable network strategy.

  Do a complete factory reset.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  N.b.: any of your files on the hard disk of the TC are deleted... This erases just the settings of the router of the TC.

  Go in the wireless and ethernet on the computer and make sure you have IPv6 well positioned to post a local link only. for example...

  

  It is set to automatic might be the reason why you have problems... one day he autoed to bad settings... Auto is a plan for a disaster.

  Now, try and open the configuration of TC in airport utility... No luck... do it manually...

  Accept this self... is always a bad idea... so here go us.

  1. click on file and set up the other.

  

  2. Enter the IP... always 10.0.1.1 after a reset. No password necessary yet.

  

  3. now you can see all parts of the installation... you will go to each tab to make configuration.

  

  4. in the first place is the Base Station... and change the name... in short, no spaces and highly recommended pure alphanumeric characters.

  Ditto for passwords. Internet will be DHCP for most people having nothing else... then wireless

  

  Then the network... Choose what you want yourself... you are now in control.

  For most people, they will be set to DHCP and NAT or Off (Bridge Mode)

  

  5. Once you have finished making changes... update allows to configure them for the TC... and wait until it restarts...

  If all is good it will come back on the main use.

  

  If it still errors just click on TC icon and go back into the setup and fix anything there.

  Any step fails to tell me that that...

  You may need to switch to ethernet, if you have any problems, if.

  In airport utility now ethernet is under other devices Wi - Fi... that makes no sense at all. Ethernet will only appear when it is connected and working.

  

• Connect the airport time capsule to telstra NBN

  Grateful for the help with the required parameters to set up my time capsule airport with Telstra NBN via Telstra condition max modem router gateway, I want to use the TC as my router and for backups, I understand that I need to be able to use the TC as a router and connect the TC via an ethernet cable to the gateway I need to put the door in Bridge mode, thanks in advance

  Double post.

• Why the airport Time Capsule for P/W after update to 7.7.7

  Time Capsule ask P/W when I click on it in the Airport utility to see whats connected to it, but never recognizes the P/W or back with the icon to forget.

  He returns to normal after a disconnect and a return to the restart card. This happens since the latest firmware update to 7.7.7.

  Once the Capsule is back to normal and you can access the settings in AirPort Utility, my suggestion would be to delete the current password on the Base Station and add a new password. It worked for me with the same question, and it might for you as well.

  Make sure you remember the password in the keychain in your Mac is checked, and then click Update at the bottom right of the window to save the new settings.

  

• Airport Time Capsule ethernet and WiFi installation

  I am trying to set up my home network, but also, somehow, the practice run for the configuration of my future business...

  Here is the component.

  -Modem: Fast 5250 BELL FIBE Home Hub 2000.

  -Airport Time Capsule 1 t (a big)

  -AirPort Extreme (large)

  -AirPort Express (size of the Apple TV)

  Here are the different coverage area and device usually used in the:

  -office: Printer via USB or ethernet, ethernet MacPro, 2xMacBookAir.

  -Living room: Smart TV, Apple TV2, PS4 (all via ethernet if possible) as well as a bunch of iOS devices and laptop computer via a Wi - Fi connection

  -In room: IOS, Apple TV via Wi - Fi device.

  So good, here's the catch, the modem's in the entry closet surrounded by concrete, so I close the Wi - Fi on it. Cable Ethernet running from there, at the office, upstairs room and the main living area. The plan was to put the TimeCapsule 1 t in the office, extreme in the living room and express on the floor. But I already have problems that they can't be all connect via Ethernet in the modem... Oh! What a mess, he made... So I saw on the support page from apple, is it better to put the airport Time capsule 1 t as principal to create the network. So if I put the Capsule in the closet as the main will be backup my stuff via ethernet?

  Also, I have the older version of Time Capsule (dish 500 GB). Shud I use it as the main airport will be connected to it via ethernet anyway?

  And finally, I connect to the modem using PPPoE bell hand and another airport the main via Bridge DHCP mode. Is this fair?

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  You searched for other positions that have covered this slot a form or another? Maybe you should do that first.

  Base stations-Setting up from the airport and set up a network extended wireless (802.11n)

  Airport + Wi - Fi - Apple Support

  AirPort Utility 6.x - if your base station or Time Capsule is connected to a router providing NAT and...

  If you have documentation for your devices, then read it to see if it provides assistance. And don't overlook the help to the Finder or the Airport utility menu. If you're patient probably Bob Timmons found you your topic and help you. He is the resident expert.

• Files of WD My Cloud Airport time capsule

  I use 2T WD My Cloud as a hard disk to backup to my MacBook Pro 13 "2.5 GHz Core i5. How can I do all of my WD My Cloud backup files, transfer to the airport time Capsule. So did anyone get an answer to this question?

  Copy and paste the sparsebundle Time Machine.

  But we do not recommend usually people do. It is much better to just start a new backup for the TC and the old backup on the WD mycloud until you build up a sufficient history... say 3 months on the TC... then you can wipe.

• Airport Time Capsule 3 TB from

  Hi I want to buy airport Time Capsule 3 TB of storage and to share my video, music, another document to my mac, iPhone and the other device that we have in our House, so I can do this and make my films and another doc who are on the airport time capsule or it is just to give the backup?

  TNX

  What you ask is known as a media server.

  The Capsule is not a server media... it is a router with a built-in hard drive designed to back up the data on your Mac. Consider a Time Capsule for this effect, but not others.

• Airport Time Capsule HD access

  I have an AC of 802.11 airport Time Capsule 3 to, PartNumber: ME182LL/A, and I want to save my MacBook Air by Time Capsule app.

  In addition, I use it as an external hard drive, moving some files to the airport Time Capsule using the Finder.

  I use physical conection from my MacBook to the trough of Time Capsule a RJ45-USB converter.

  But I am extremelly experiencing a lot of time to access my files using the Finder.

  Do you have an idea how I can fix this connection?

  Do you have an idea how I can fix this connection?

  I guess that your Mac has a Thunderbolt port.

  Use a Thunderbolt for the Ethernet card.  It's up to 10 times faster than the USB adapter. Your actual speed will be 4 to 5 times faster than USB.

  Maid in Gigabit Ethernet Adapter - Apple

• How to perform a manual backup full with airport Time Capsule

  I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

  Dick C.

  Go to the Time Machine icon in the menu bar and click on NTI Backup Now

• My LAN airport Time Capsule 802.11ac began to abandon their studies on the Cox network.

  My local network that the internet began to abandon their studies in airport Time Capsule 802.11ac associated with my network of Cox. The green light stays on. Unplug it and plug it back bring it will return immediately.

  I disabled IPv6 on the suggestion of the counsel of COX because Cox and Apple have a problem with these capsules of time regarding IPv6 and IPv4 is supposed to work.

  It is a question of cox or should my time capsule service?

  This modem do you have? Brand and model please.

  It may be a contributing factor, where the transition to IPv6 is causing issues, but raised another problem.

  He has also reported a DNS issue... Please fix the DNS servers of your TC... (IPv6 is set to link-local now in your TC?) Assign the values google DNS and see if it improves things.

• Need help with the implementation of a replacement airport Time Capsule

  Hi... Recognizing the help. My 1 TB airport Time Capsule (ATC) crashed and I bought a new 2 TB ATC to replace. In my preference system, Time Machine reflects that my ATC 1 TB is still active. How to pay safely my 2 new cases of tuberculosis ATC to replace the 1 TB ATC?

  Assuming that you 1. already connected the new TC on your network, and/or 2. you were able to save all data on TC 1 TB, or simply do not take care of him You can just open Time Machine preferences, turn the Time Machine off, and then select the disk in the new time Capsule. A brand-new first backup starts to run, and it will certainly take time.

  Another option is to connect the new TC on ethernet directly on your Mac and then select the Time Machine preferences, this will speed up the first backup.

  In case you were able to archive the old backup and transfer it to your new TC, you will continue your backup schedule by simply selecting the new TC in Time Machine preferences.

  I hope this helps.