Parameter query DCT - strange behavior

I use the database connectivity toolkit to create a parameter query, but it does not work as expected. I have four parameters, one of which is defined by an array of values. When the value of each array is passed individually (table 1), the query works. During the passage of two values, the order determines if two recordsets are returned. Before "Moisture" returns two recordsets expected, but reverse the order causes the second return empty, that is by the way of "Temperature." Also has anyone seen this kind of behavior before?

I don't know how to do a query set in SQL Server Management Studio, but who's next on my list of troubleshooting.

Details:

LabVIEW Full 2011 SP1 (11.0.1f2)

DCT (11.0.0)

SQL Server Express 2012

This should help you really loved ones.  Just wire your entries in the right setting and create the stored procedure in your database.

Tags: NI Software

Similar Questions

  • redeclenchables strange behavior digital output

    I created a redeclenchables digital dashboard task (finished) digital output as follows: (in DAQmx C)

    DAQmxCreateTask("",&_taskHandle);
    DAQmxCreateDOChan(_taskHandle,"/Dev2/port0/line6","",DAQmx_Val_ChanPerLine);
    DAQmxCfgSampClkTiming (_taskHandle, "" / Dev2/Ctr0InternalOutput ", _clockRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, static_cast (_sampleCount)");
    DAQmxCfgOutputBuffer (_taskHandle, static_cast (_sampleCount));
    DAQmxCfgDigEdgeStartTrig (_taskHandle, "/ Dev2/PFI4", DAQmx_Val_Rising ");
    DAQmxSetStartTrigRetriggerable (_taskHandle, true);
    DAQmxWriteDigitalLines (_taskHandle, static_cast(_sampleCount), FALSE,-1, DAQmx_Val_GroupByChannel, _pDigital, NULL, NULL);
    DAQmxStartTask (_taskHandle);

    sample clock:

    DAQmxCreateTask ("", & _taskHandleCO);
    DAQmxCreateCOPulseChanFreq (_taskHandleCO, "/ Dev2/ctr0","", DAQmx_Val_Hz, DAQmx_Val_Low, 0,0, _clockRate, 0.5 "");
    DAQmxCfgImplicitTiming (_taskHandleCO, DAQmx_Val_ContSamps, _numSamples);
    DAQmxStartTask (_taskHandleCO);

    When I run the task without redeclenchables parameter, it output a correct signal. However, if I run with redeclenchables it out almost exactly 2 times faster than normal. For example, a pulse whose width of 10 ms became 5 ms and repeats again to be 2 pulses of 5 ms. This is repeatable, no matter how much or how fast triggers provided.

    My card is PCIe-6363. I do not know what causes this strange behavior, and I hope someone can help on this.

    Thank you.

    It disappears after reset configuration. Might be interesting for future reviews.

  • Strange behavior with V$ PDB and CDB_SEGMENTS views of Oracle 12 c

    Hello

    I am trying to run a query between the CDB_SEGMENTS and the views V$ PDB on the container ROOT, but I have a strange behavior:

    SQL*Plus: Release 12.1.0.1.0 Production on Fri Sep 6 12:33:25 2013
    
    Copyright (c) 1982, 2013, Oracle. All rights reserved.
    
    
    Connected to:
    Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
    
    SYS@orcl12c 06.09.2013> show con_id
    
    CON_ID
    ------------------------------
    1
    SYS@orcl12c 06.09.2013> show con_name
    
    CON_NAME
    ------------------------------
    CDB$ROOT
    SYS@orcl12c 06.09.2013> SELECT B.NAME
     2 , A.CON_ID
     3 , A.TABLESPACE_NAME
     4 FROM CDB_SEGMENTS A
     5 INNER JOIN V$PDBS B
     6 ON B.CON_ID=A.CON_ID;
    
    no rows selected
    
    SYS@orcl12c 06.09.2013 12:34:17> SELECT B.NAME
     2 , A.CON_ID
     3 , A.TABLESPACE_NAME
     4 FROM CDB_TABLESPACES A
     5 INNER JOIN V$PDBS B
     6 ON B.CON_ID=A.CON_ID;
    
    NAME CON_ID TABLESPACE_NAME
    ------------------------------ ---------- ------------------------------
    PDB$SEED 2 SYSTEM
    PDB$SEED 2 SYSAUX
    PDB$SEED 2 TEMP
    PDBORCL 3 SYSTEM
    PDBORCL 3 SYSAUX
    PDBORCL 3 TEMP
    PDBORCL 3 USERS
    PDBORCL 3 EXAMPLE
    ...
    
    23 rows selected.
    
    SYS@orcl12c 06.09.2013> SELECT *
     2 FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('asa03y45g99zb'));
    
    PLAN_TABLE_OUTPUT
    -----------------------------------------------------------------------------------------------------------------------------------------------------------
    
    SQL_ID asa03y45g99zb, child number 0
    -------------------------------------
    SELECT B.NAME , A.CON_ID , A.TABLESPACE_NAME FROM
    CDB_SEGMENTS A INNER JOIN V$PDBS B ON B.CON_ID=A.CON_ID
    
    Plan hash value: 3590150304
    
    -------------------------------------------------------------------------------------------------------------------------------------------
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
    -------------------------------------------------------------------------------------------------------------------------------------------
    | 0 | SELECT STATEMENT | | | | 1 (100)| | | | | |
    | 1 | NESTED LOOPS | | 333 | 14985 | 0 (0)| | | | | |
    |* 2 | FIXED TABLE FULL | X$CON | 2 | 30 | 0 (0)| | | | | |
    | 3 | PX COORDINATOR | | | | | | | | | |
    | 4 | PX SEND QC (RANDOM) | :TQ10000 | 167 | 5010 | 0 (0)| | | Q1,00 | P->S | QC (RAND) |
    | 5 | PX PARTITION LIST AND | | 167 | 5010 | 0 (0)|KEY(AP)|KEY(AP)| Q1,00 | PCWC | |
    |* 6 | FIXED TABLE FIXED INDEX| X$CDBVW$e7cdf8a6 (ind:11) | 167 | 5010 | 0 (0)| | | Q1,00 | PCWP | |
    -------------------------------------------------------------------------------------------------------------------------------------------
    
    Predicate Information (identified by operation id):
    ---------------------------------------------------
    
     2 - filter(("CON_ID">1 AND "INST_ID"=USERENV('INSTANCE')))
     6 - filter("CON_ID"="CON_ID")
    
    
    25 rows selected.
    
    SYS@orcl12c 06.09.2013> select con_id,count(*) from cdb_segments group by con_id;
    
     CON_ID COUNT(*)
    ---------- ----------
     1 5795
     4 4397
     3 3923
     2 3401
    
    4 rows selected.
    

    Basically, I would like to display the container_name of segments within all PDB files, but the join between CDB_SEGMENTS and views of V$ PDB does not work (lines 20-25) pending the join between CDB_TABLESPACES and V$ PDB works very well (lines 29-34). I've posted the execution plan (lines 50-82).

    You have ideas about this behavior?

    Thank you in advance,

    Arnaud.

    Hello

    Not 100% sure that this is a bug or just something about the way containers works now - however this select seems to work OK:

    SELECT B.NAME, A.CON_ID, A.TABLESPACE_NAME

    OF CDB_SEGMENTS, V$ PDB B

    where to_char (B.CON_ID) = to_char (A.CON_ID)

    See if it works for you too?

    See you soon,.

    Harry

  • Strange behavior of POF in 3.6.1.3

    Hi all

    We have seen some strange behaviors of POF in 3.6.1.3 paricularly around classes with Boolean fields.

    Here is my test scenario:
    package org.gridman.pof;
    
    import com.rbs.odc.dashboard.server.cluster.model.Case;
    import com.tangosol.io.pof.ConfigurablePofContext;
    import com.tangosol.io.pof.PofReader;
    import com.tangosol.io.pof.PofWriter;
    import com.tangosol.io.pof.PortableObject;
    import com.tangosol.io.pof.reflect.PofValue;
    import com.tangosol.io.pof.reflect.PofValueParser;
    import com.tangosol.io.pof.reflect.SimplePofPath;
    import com.tangosol.util.Binary;
    import com.tangosol.util.ExternalizableHelper;
    
    import java.io.IOException;
    
    public class JK implements PortableObject {
    
        private String stringField;
        private boolean booleanFieldOne;
        private boolean booleanFieldTwo;
    
        public JK() {
        }
    
        public JK(boolean booleanFieldOne, boolean booleanFieldTwo, String stringField) {
            this.booleanFieldOne = booleanFieldOne;
            this.booleanFieldTwo = booleanFieldTwo;
            this.stringField = stringField;
        }
    
        @Override
        public void readExternal(PofReader pofReader) throws IOException {
            stringField = pofReader.readString(0);
            booleanFieldOne = pofReader.readBoolean(1);
            booleanFieldTwo = pofReader.readBoolean(2);
        }
    
        @Override
        public void writeExternal(PofWriter pofWriter) throws IOException {
            pofWriter.writeString(0, stringField);
            pofWriter.writeBoolean(1, booleanFieldOne);
            pofWriter.writeBoolean(2, booleanFieldTwo);
        }
    
        public static void main(String[] args) {
            ConfigurablePofContext pofContext = new ConfigurablePofContext("jk-pof-config.xml");
    
            JK value = new JK(false, true, "JK");
    
            Binary binary = ExternalizableHelper.toBinary(value, pofContext);
    
            PofValue pofValue = PofValueParser.parse(binary, pofContext);
            PofValue childOne = new SimplePofPath(0).navigate(pofValue);
            PofValue childTwo = new SimplePofPath(1).navigate(pofValue);
            PofValue childThree = new SimplePofPath(2).navigate(pofValue);
    
            System.out.println(childOne.getValue());
    
            try {
                System.out.println(childTwo.getValue());
            } catch (Exception e) {
                System.out.println("Exception: " + e.getMessage());
            }
    
            try {
                System.out.println(childThree.getValue());
            } catch (Exception e) {
                System.out.println("Exception: " + e.getMessage());
            }
    
        }
    }
    and the config.xml file - pof - jk used above...
    <pof-config>
        <user-type-list>
            <include>coherence-pof-config.xml</include>
    
            <user-type>
                <type-id>3001</type-id>
                <class-name>org.gridman.pof.JK</class-name>
            </user-type>
    
        </user-type-list>
    </pof-config>
    When you run the main method of the class above you could expect to get
    JK
    false
    true
    ... but what you get is...
    JK
    null
    Exception: -34 is an invalid type
    What is going on? The booleanFieldOne seems to have been serialized as the type-34 which is PofConstants.V_BOOLEAN_TRUE which makes sense, but the code to deserialize the field cannot handle type-34. The booleanFieldTwo returned null and is serialized as the type-65 which is PofConstants.T_UNKNOWN

    Where we have a problem, is if we do a query with a filter like this...
    new EqualsFilter(new PofExtractor(null, 1), true);
    .. .it will break whenever he tries to extract the POF value, where booleanFieldOne is true.

    I know that we can solve this problem by always specifying the type, so it does not work
    new EqualsFilter(new PofExtractor(Boolean.class, 1), true);
    and it works, too, considering that it fails without specifying the type...
    childTwo.getValue(Boolean.class);
    Although there are alternatives, it seems very strange.

    What's even stranger, is that if you do not serialize the stringField so writeExtrnal and readExternal methods look like this
    @Override
    public void readExternal(PofReader pofReader) throws IOException {
        //stringField = pofReader.readString(0);
        booleanFieldOne = pofReader.readBoolean(1);
        booleanFieldTwo = pofReader.readBoolean(2);
    }
    
    @Override
    public void writeExternal(PofWriter pofWriter) throws IOException {
        //pofWriter.writeString(0, stringField);
        pofWriter.writeBoolean(1, booleanFieldOne);
        pofWriter.writeBoolean(2, booleanFieldTwo);
    }
    You will get this output...
    null
    false
    Exception: -34 is an invalid type
    iNow the stringField is null (that we have not serialized it) but the booleanFieldOne now is desrialized correctly as a Boolean false. We have noticed that if you have a Boolean value as the first field you serialize in the method writeExternal methods then it is serialized as the type POF - 11 which is PofConstants.T_BOOLEAN and is deserialized as the correct value true or false value.

    See you soon,.
    JK

    Hi Jonathan -.

    For the purposes of tracking, JIRA COH-5231 opened for this issue.

    Mark J
    The Oracle coherence

  • Firefox crashes (and other strange behaviors) due to gifs

    From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
    This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
    It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

    39 of Firefox seems to have solved the problem.

  • I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

    I just installed Firefox 29,0 for Mac.
    I have a strange behavior of the bar tabs and the address bar with this new version.
    Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
    (I add a screenshot, but I can't find a way to do it).

    Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

    • Firefox menu button > Options/Preferences > toolbars
    • View > toolbars > customize
  • Strange behavior USB Flash Drive Satellite A100-626

    Hello

    I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

    So far, everything works as expected, except for one little (or no) question.

    When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

    The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

    Opening of the question mark can read what follows:

    "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

    Following the instructions above, the light turns off, lol...

    Someone else met this strange behavior? If so, any solution?

    I tried a few USB flashes that run well on XP and they both do the same thing.

    Thank you, Nuno!

    Hi Nuno

    It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

    You have the same situation with all the USB ports?

  • Strange behavior with the function «Help in command line»

    So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

    If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

    All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

    Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

    Note - side

    Curiously, the Index for the help lvconcepts.chm file looks like this:

    In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

    Hello

    Please contact National Instruments!
    It is a very strange behavior.  I tested out and seen the exact
    same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
    From what I can tell the a possible workaround solution that we have documented
    in the post of root Canal.  I can't continue to look into this in order
    to see if there is no other workaround solution or a reason why it is
    run in this way.  Thanks much for the feedback!  If
    you have any other questions on this subject please post them here.
    Have a great day!

  • Strange behavior file open/create/replace

    Hi all

    I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

    Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

    Thanks for your time,

    Kind regards

    Harry

    Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

    (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

    See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

    Never use the paths as strings. There are very few cases where this would be appropriate.

  • How to use a parameter query to select and display the data in the table of the façade

    Hiiiiii

    I am using Access 2007 database
    I want to select the specific data in the database using control of the chain as 'select product, size, weight of ProductInfo where barcode (chain control) =?'  and also display the same table of façade.

    I use the connected database toolkit.
    I saw the example of the parameterized insert, but it did not help to use parameterized select query, as well as to display data of parameterized select query.

    I looked for example on parameterized select query, but I don't have any.
    So pls guide me how to do this. I would like to know the other method (if any) that the use of parameter query to perform the same thing.
    If possble pls share a vi reference.
    Thank you!!!

    HII szewczak
    Thanks for the reply
    but I did not getsolution in one of your shared links
    My problem is solved. There is no need to use the parameter query to select control values
    In my case I want to display data from database where bar code is even entered by the user
    I use the data function DB TOOL CHOOSE and create the condition of chain based on concatenation of strings

  • Issues coming out of "sleep mode" and strange behavior when restarting with GPU

    I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

    However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

    This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

    Without the GPU, none of these problems occur. At the very least, not regularly.

    I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

    Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

    Any suggestions would be greatly appreciated!

    Problem has been solved!

    For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

    http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

    It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

    However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

    As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

  • Strange behavior of TM2 recharge battery - only charges when almost dead

    Hi people,

    I have a new 2200 TM2T who exhibits some strange behavior of battery charge.  When plugged in, the battery will say "connected, charge", but the battery does not charge at all, no matter how much time he has left in (reported remaining level remains the same).  However, if I leave the battery discharged completely, it will start loading again, all the way up to 100%.

    It's a kind of weird automatic battery calibration or something?  I am hoping there is a way to solve this problem, because it's really annoying to not be able to keep busy all the time.

    Hi people,

    I just wanted to report on the resolution of my battery problem.  Returned the laptop to HP, and technical support has replaced the motherboard.  Works fine now.

  • strange behavior

    Hello

    I have a strange behavior on the main screen of my application.

    My screen looks like this:

    1, 2, 3, 4 and 5 are bitmap with navigation button, click scope.

    I have a separate Thread for processing and this X thread updates the content of the label and label B.

    Whenever the thread call X function is update the function labels are running label.setText (newtext) on both labels.

    Stange behavior:

    When the x thread updated, the text of the labels (via the function Y) the emphasis is on button bitmap 1,2,3 or 4, the text of labels disappears and the screen looks like this:

    If we move to the development for bitmap button 5 or ListField labels updated successfully and the screen looks like this:

    I checked on debug only when the labels are updated that the text is not null.

    You have some ideas on what is the cause?

    Best regards

    Hello

    I found the solution for the strange behavior. I added a "HFMst.ivalidate ()"; on the function Y and that fixed the strange behavior.

    Thks simon_hain and arkadyz for your help.

  • Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

    Hello world!

    Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

    (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

    (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

    On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

    It will be good to hear comments & thoughts about these questions.

    Best regards

    Dmitry.

    I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira

  • Strange behavior with postGlobalEvent and eventOccurred()...

    Hello world

    I have a browser plugin for my application that will do two things:

    Firstly, when the BlackBerry browser is forwarded to a Web page with a particular MIME type, the browser plugin will say my application to go to the foreground. It works without any problem.

    Secondly, the browser plugin will display a global event at my request. My request, making use of eventOccurred(), will look for this event and the EC type-approval, it will execute an authorize() method that I have. This also works. However, I notice some strange behavior:

    The first time my application launches the BlackBerry browser and goes to the page specified (with a custom MIME type), everything works fine. If I had while my application to launch the browser and do it AGAIN, my authorize() method is running TWICE. If I open the browser of my application for the third time, so my authorize() method is started THREE times. See the model?

    .. .This is all this without leaving my application. If I had to leave and then start my application again, the 'sequence' prior would begin again. Thus, it seems that whenever x times that I repeat this process, the eventOccurred() method will receive x events.

    Here are a few snippets:

    public class Events {
        final public static int EVENT_AUTHORIZE = 1;
        final public static int EVENT_OTHER = 2;
    }
    
    manager.postGlobalEvent(pid, 0xCAFEBABE, 1, 0, null, null);
    
    public void eventOccurred(long guid, int event_type, int arg2, Object arg3,
                Object arg4) {
            if (guid == 0xCAFEBABE) {
                switch (event_type) {
                case Events.EVENT_AUTHORIZE:
                    authorize();
                    System.out.println("EVENT EXECUTION");
                    break;
                case Events.EVENT_OTHER:
                    break;
                }
            }
    
        }
    

    Can we see what is happening here? I've been "racking my brain" on this one for a while now...

    Thank you!

    "Thus, this can work any time the class is instantiated." The class is instantiated just before I open my browser".

    Application.getApplication().addGlobalEventListener(this);
    

    If you call the above (by instantiating your class) every time that you open the browser, applications to register this event listener again and again.

    If you're going to do it this way, make sure removeGlobalListener you when your application is done processing.

    "Can I make addGlobalListener when my application starts even if this class does not implement GlobalEventListener?"

    You can always have your UiApplication implement GlobalEventListener or just instantiate a new object that implements it in the constructor of your UiApplication.

Maybe you are looking for

  • I can't update my Firefox. It is stuck at version 2.0

    I can't update my firefox like it is stuck on version 2.0.Went to the Firefox Addon page and the detected page my firefox version 2.0. I tried to uninstall my firefox and reinstall (with a more recent version), but it is still detected as Version 2.0

  • NB550D-10U - upgrading memory 1333 MHz? C-60 processor

    I recently bought the NB550D-10U model that has the processor AMD C-60 inside. I read most of the messages on this forum about memory upgrades and they suggest all requiring RAM DDR3 1066 MHz (PC3-8500). I guess it is for models with a C-50 processor

  • Reclassification of Vista32-bit to Windows 7 Home Premium. I get error 0 x 80070490.

    When I insert the upgrade CD I get a message "Windows cannot find a place to store temporary installation files. To install windows ensure that a partition on your startup disk has at least 692 MB of free space. "Error code: 0 x 80070490. » Can anyon

  • finished - c410b all-in-one white display blinking lights

    Hello I have this printer for about two years now. Yesterday, when I turned it on, there was a problem. He started going through his starting routine with the HP logo displayed, I attached peripheral tone from the pc. However, there was no verificati

  • Circular progress Native

    Looking for a control native circular progression... I had already looked @ the circular slider, but it would need a little change to make it work as a progress bar... I was also looking @ javascript solution, but it's not native! http://jsfiddle.NET