Parameters for the turning off the mouse pad

Similar Questions

• How to turn on the Double Tap feature on the mouse pad!

  Good so I used to be able to double tap on the mouse pad, click and I accidentally turned off somehow and I can't for the life of me understand how to re-enable it. Help please!
  

  In most cases, the controls for it are in the start menu / Control Panel / mouse.  Where varies by manufacturer (computer and mouse) so I can't help you there that you have not provided this information, and even if you don't I probably just refer to manufacturers of assistance.  But before you go watch, read the next paragraph.

  But it turns out that there is another way to set this feature.  Here is the procedure:http://www.vistax64.com/tutorials/40246-single-click-option.html.  It is quite simple and does not involve all the controls of the mouse (and can be changed back as you wish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to change the default setting for the touch-pad?

  I have a HP Pavilion dv7 running Windows 7 Home Premium.

  I use it 99% of the time on your desktop, using a mouse instead of the key.

  Sometimes I forget to turn off the key by using the small dot in the upper left corner, which causes the movement of the cursor unexpectedly.

  Question: Is there a way to reset the value by default for the touch-pad to be inactive, and use the small point to activate the key only if I use the computer in a remote location?

  Thanks for any help on this.

  Larry

  Hi Larry,

  See if you have the following option.

  Open windows control panel, open the mouse, click the device settings tab and then click on the button "settings".  Click on the + next to the Touchpad disable Zone, and then click top left Action.  Click on the radio button for TouchPad Switch Off, click on apply and then click Ok.  Click apply and then click OK in the remaining window.

  This should enable the TouchPad on/off function to remember, so if you turn it off, it will be turned off after a reboot.

  Kind regards

  DP - K

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Disable the mouse pad

  I want to disable my mousepad on my computer dell laptop.  I can't find it anywhere... only the speed of our buttons of the mouse options.  I want to turn the mouse pad everything out, or unless you disable the option of tapping.  It drives me crazy.

  It is perhaps feasible through the Fn (next to the left shift key) key in combination with one of its F - keys, see the documentation for your laptop. You could also look in Control Panel-mouse for deactivation of plays and other functions (but maybe that's where you have already looked at). Finally, you could disable the touchpad in Device Manager.

  • Click Start
  • Click on run
  • Type devmgmt.msc and press enter

  To get help, if you need, let us know your Dell laptop model number.

  Tricky

• Satellite C70D - impossible to unlock the mouse pad

  Hello

  My mousepad doesn' works as it should. I tried to unlock with FN + F5, only F5, FN + F9,... but nothing helps.
  All I can do is move the cursor and use the mouse pad when it keeps the left mouse button at the same time.
  Someone at - it a solution?

  To be honest I don't never heard such behavior touchpad.
  Did you test all parameters of the touchpad?
  If there is possibility to set all settings as default please do and test the functionality again.

  In any case, best test material is to reinstall the operating system and check the functionality of the touchpad with "presets".

• The mouse pads, the Satellite Pro C660, do weird things

  Hi guys, I have a Satellite C660 Pro who has developed a weird problem

  When the laptop has been for some time, the mouse pad will start scrolling and horizontal scrolling when I do not want to control the cursor of the mouse almost impossible until I restart, then it works very well for anywhere between 20 minutes and a few hours before it goes nuts new

  I tried to update the drivers, I also tried to disable the ability of mouse pad to scroll or do anything other than to be a mouse pad, but this does not seem to have changed anything

  any ideas out there?

  Have you also tried updating the BIOS?

• Installed Windows 7-bar side on the mouse pad does not

  Installed Windows 7 Pro on my S10. I noticed that the right sidebar on the mouse pad that scrolls one page up and down does not work.
  Solutions or responses to get it working back?

  Update Touch Pad Driver for your model. When you find the updated drivers, there is a listed for Windows 7 - download and run the exe.

  Surge in work.

• How can I get a driver 64 bits for the mouse?

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  Original title: mouse drivers

  The game, August 28, 2014 16:18:16 + 0000, WILLROSS wrote:

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  I don't know if there is a driver 64-bit Windows 7 to your
  mouse. It's Logitech to decide or not to produce a.
  Check on their website to see if it exists. If not, you
  are out of luck, but fortunately that a new mouse shouldn't be very
  Dear.

• Wireless mouse is not found by the software installed for the mouse

  HP Comfort Wireless Laser mouse is not recognized during installation of the software provided with the mouse, and even after the pc has restarted that he still does not see the mouse. It however works but nothing can be configured in the software because it tells me no device found! installed on another pc with the same result: no devices found. went around with the connection button on the mouse, held next to the receiver: nothing.

  Does he know this problem?

  I recommend to uninstall the software for the mouse that you currently have and download and install the latest version of the software for the mouse:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4187476&LC=en&cc=us&DLC=en&lang=en&cc=us

  I think it was a problem that could cause the behavior you're seeing has been corrected in early 2012.

  I hope this helps!

  Dave (I work for HP)

• Create parameters for the WriteData function

  Hello

  How would create parameters for the writedata function to populate the html code?

  CODE:

  Function GetCluster {}
  and {{foreach ($Datacenter (Get-Data Center))
  foreach ($Cluster in (Get-Cluster-location $Datacenter)) {}
  New-Object PSObject-property @ {} TypeName
  vCenter = $Datacenter.Uid.Split("@") [1]. Split(":") [0]
  Datacenter = $Datacenter.Name
  Cluster = $Cluster.Name
  HAEnabled = $Cluster.HAEnabled
  DrsEnabled = $Cluster.DrsEnabled
  DrsMode = $Cluster.DrsMode
  
  }
  }
  }
  # Function compiles the data transmitted by the GetCluster function in HTML table format
  Function writedata {
  param ($vCenter, $Datacenter, $Cluster, $HAEnabled, $DrsEnabled, $DrsMode)
  # < td > < Center > < b > < of police = "Tahoma" > $Datacenter < / police > < / b > < / center > < table

  
  {$tableEntry = "< tr > < td > < font ="Tahoma">$vCenter< / fonts > < table > < td > < Center > < b > < of police ="Tahoma">$Datacenter< / font > < / b > < / center > < table > < td > < Center > < b > < of police ="Tahoma">$Cluster< / fonts > < / b > < / center > < table > < td > < Center >"} < b > < of police = "Tahoma" >$HAEnabled< / fonts > < / b > < / center > < table < td > < Center > < b > < font = "Tahoma" >$DrsEnabled< / police > < / b > < / center > < table < td > < Center > < b > < font = 'Tahoma' color 'dark blue' = >$DrsMode< / fonts > < / b > < / center > < table > < /tr ' > '.
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}

  Thank you

  You specify when you call the writedata function, so I guess it's in the function Get-Cluster.

  You can pass the object you create in the GetCluster function as a parameter.

  Try something like this

  Function GetCluster {
      & { foreach ($Datacenter in (Get-Datacenter)) {
              foreach ($Cluster in (Get-Cluster -Location $Datacenter)) {
                  $clusObj = New-Object -TypeName PSObject -Property @{
                      vCenter = $Datacenter.Uid.Split("@")[1].Split(":")[0]
                      Datacenter = $Datacenter.Name                    Cluster = $Cluster.Name                    HAEnabled = $Cluster.HAEnabled                    DrsEnabled = $Cluster.DrsEnabled                    DrsMode = $Cluster.DrsMode
                  }
                  writedata $clusObj            }
          }
      }
  }
  
  # Function will compile the data passed from the GetCluster Function into HTML table format
  Function writedata {
      param ($object)
  
      $tableEntry = "$($object.vCenter)" +
          "$($object.Datacenter)" +        "$($object.Cluster)" +        "$($object.HAEnabled)" +
          "$($object.DrsEnabled)" +        "$($object.DrsMode)"
          Add-Content $fileName $tableEntry
          Write-Host $tableEntry}
  

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• How to disable the mouse pad scroll feature?

  A crossed the features Control Panel and I am unable to turn off this feature

  Most of the keys are now equipped with software designed to have the side right of the touch pad scroll top and bottom of the page and the left to zoom in and out of the page.
  In most cases, if you click Start > Control Panel > mouse, there should be a tab of brand such as Dell Touchpad. In addition, you can find a touchpad icon in the taskbar (next to the clock in the lower right corner of the screen). Right click and open this icon should help you in the right direction.
  The process to change these settings varies depending on the laptop and may require a phone call to the manufacturer for assistance.
  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• best settings for the mouse Aspire V17 Nitro

  Can someone please help me get my beautiful new laptop Aspire V17 Nitro back in fast running.  I was playing with the mouse and wanted to see what it better then made more big and dark.  not a others that I don't remember fiddling with, but now the mouse is not sensitive to my contact, whom he accuses delay - buffer is even worse.  Apologizes for being a bozo.

  PamL,

  To reset the your mouse pointer to the default settings, if necessary, you will need to go into the control panel to do. Here are the steps to achieve this:

  Desktop mode

  1. Right-click on the Start button, click Control Panel.
  
  
  2. On the left, click on hardware and audio.
  
  
  3. In devices and printers, click the mouseon the left.
  
  
  4. Left-click on the pointers to the bottom tab, you will see by default, left click it.

  To adjust your settings for the touchpad, you're in mosaic mode, which simply means that you can click on the Start button of Windows once to get there.

  1. On your keyboard, type parameters.
  
  
  2. Left click on laptop settings.
  
  
  3. Left-click on PC and devices.
  
  
  4. Left-click on the mouse and touchpad.

  I'll predict what the camera I could get hold of parameters:

  Touchpad: on

  Activate Swiping from the left or right edge: on

  Reversal feeling of scrolling: Off

  To help prevent the cursor to move accidentally while you type, cut the taps or change the time before taps work: way

  If you set the unit back to this and it still has problems, it could be related to a recent Windows Update which took place on your device. You can perform a System Restore and your anti-roll system when it worked correctly and works before here.

• The mouse pad on laptop XP always settings reset after reboot

  Pad parameters (touchpad), I put the mouse on my laptop Dell running XP Home edition. When I reboot all my settings are gone, and I'm back to the default value.

  I found the answer for Vista that says remove startup KHALMNPR, but I don't have anything like that in my startup.

  How can I get these settings to 'paste' beyond a reboot?

  Thank you

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner