Parameters of the Channel Express airport

Similar Questions

• can I use a bought the Japan express airport base to the United States?

  I have an airport express I bought at the Japan. I was wondering if I can bring to the United States and use it. Or are there differences in the channels or something?

  https://en.Wikipedia.org/wiki/List_of_WLAN_channels

  There are differences in the channels, but I would hope that, in the configuration menu, there will be options to choose the country.

• Cannot complete the installation express airport using iOS.

  I go to Wi - Fi and find the aiport express under the heading "set up the new airport base station. I can access the quick screen to create my new network. Put in my info and it says creating this Airport Express to create a network. It's when things go wrong.

  It seems stuck "to search the new network for a long time. Then he said: an unexpected error has occurred, try again. At this point it I run the Setup again, that the error occurs because I'm trying to connect to the EA. I have to reset the AE to get another shot at the implementation of the new network.

  The modem is showing everything is fine. I bought the AE because he said that I could set up through my iPhone. It's very frustrating.

  Normally, the installation on the iPhone and iPad software works well and is in fact more reliable software installation on a Mac, it is therefore possible that you have a faulty AirPort Express... just as I did a few months ago.

  However, if you want to try the installation a few times however, we can do it. We assume that you have verified that you have a good Ethernet cable connecting the modem and the AirPort Express, correct?

  Can you provide the number of brand and model of the modem you are trying to use with the AirPort Express?

• Passing parameters to the EL Expression method

  Hello
  With the help of jdev 11g R1.
  
  Is it possible to pass parameters to a method in an expression EL located in a property of UIComponent?
  something like: af:inputText label = 'asdf' id = "id1" disabled = "#{bean.check ['value']}" / >
  
  You can do this by using SecurityContext userInRole (#{securityContext.userInRole ['admin']}, but I need to do in my own managed bean.) When I try to follow the same approach as securityContext (i.e. #{mybean.check ['value']}) and having a check (String) method in mybean, it gives me an error saying that there is no such thing as checking property.
  
  I followed the post http://technology.amis.nl/blog/622/how-to-call-methods-from-el-expressions-pre-jsp-20-trick-for-jsps-with-jstl that shows something to do (the bean implements interface card), it works.
  The question is if this will also work in future releases of the ADF.
  
  Thank you
  Roger

  Hello

  You are hard to figure out how to work the EL:

  ValueExpression: solve the last part of the phrase as a property of the object resolved the previous expression. [So if you #{securityContext.userInRole\['admin'\}] or #{securityContext.userInRole.admin}, it really means "find the admin of the object property #{securityContext.userInRole}", now #{securityContext.userInRole} is acard. Until getting the 'admin' of a card property means getting the value of the key "admin". Now, if #{securityContext.userInRole} is a custom made map which replace the get method to implement logic, it can look like it is a method call with the expression from the point of view of EL, but it isn't really happening.

  MethodExpression: solve the last part of the phrase as a method with a specific context signature of the object resolved the previous expression. Now the specific context depends on the attribute being used, actionListener will seek public Sub method (ActionEvent) and nothing else. So, if you want to pass a parameter by using the same strategy, you do not disrupt the party, but you can influence the previous part, which is a ValueExpression. So, let's say you have actionListener = "#{foo.bar.method}" and must pass the parameter to the method, you can use instead of #{foo.bar\[parameter\].method}, where #{foo.bar\[parameter\}] resolve to an object with a public method (ActionEvent) Sub, but instantiated during the resolution of parameter passing the said parameter to the constructor of the object. " This way is quite complicated, however, and we never had to use it in the projects I've done (and some of them were / are very complex). I suggest to the contrary push settings in the object before calling the method. Let the example of listener to action:

  public class MyController
  {
      private MyAction action;
  
      public ActionListener getAction()
      {
          if (action == null)
          {
              action = new MyAction();
          }
  
          return action;
      }
  
      private static class MyAction implements ActionListener
      {
          private Object parameter;
  
          public void processAction(ActionEvent ev)
          {
              // do something
          }
  
          public String getParameter()
          {
              return parameter;
          }
  
          public void setParameter(String parameter)
          {
              this.parameter = parameter;
          }
      }
  }
  

  Then in the page:

  Kind regards

  ~ Simon

  Published by: Simon Lessard on December 11, 2009 10:57

• Unexpeted error in the configuration of the A1264 express airport

  Weird problem.  When I try I installed on my home network (router verizon), it runs the installer, just give me the unexpected error message (try to use it simply as an assemblage of airtime for a stereo).  Whether on my phone or my mac, it lands knocking out WiFi on the device to the point where I forget my network and join using the password.  Curiously, it worked perfectly when the tried to implement to work on my phone.

  Thank you, Peter

  Another issue with that.  Now my Imac does not connect to the internet. I tried to forget the network, but it does not help.  Oh boy!

  Peter.

• Is it possible to use express Airport and Time Capsule both as two Wifi-repeaters at the same time?

  Hello

  I have a time Capsule from the airport. I use it for my back ups and he repeats my wifi in the House (bottom).

  Now I need a Repeater wifi upstairs. I think to buy Airport Express. I will connect the Airport express with a Lan connection on the floor. And then I would also have wifi on the floor.

  But is it possible to use the time Capsule Airport express airport and at the same time: two repeaters-wifi?

  1. I have a Fritz! Box router / wifi (we called wifi Fritz! box)

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  Is this possible?

  Before I had used TP-link (in socket), but it works for a few months.

  Thank you for your help and advice.

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  I think that your terminology wrong... the TC cannot work as a Repeater in the Frtiz.

  I think that you have done is connect via ethernet and run it as wireless... or WAP Access Point. It is perfectly great way to do it.

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  This is connected by ethernet, then it will work fine... you can call it Expresswifi

  You are certainly going to clutter the wireless channels, you could so be interesting rather than auto setting fastenings.

  2.4 ghz has been set to 1, TC 6 and 11 Express then Frtiz.

  5 GHz is less of a problem... auto should be fine, because the beach is mediocre.

• Express airport, used for the speakers, loses the connection to the network wireless after about 30 seconds

  Second generation of airport express base station used to play music loses connection wireless, also a second express network, gen airport after about 30 seconds.  Tried to change channels, reorienting the airport, using a different device - ipod and ipad, to listen to music - nothing works. Interestingly, my Amazon Music plays fine on the same airport and speakers and loses no signal.  Any help?

  Where the two Express base compared to the other station? Same room, different rooms or different floors? The host of iTunes (iPod or iPad) location when the streaming? Near the Express which provides the network Wi - Fi or the one used for streaming?

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.

• Change of modem can improve the speed of Airport Express Extender?

  My router is a Airport Extreme 6th Gen.

  When Wi - Fi and close this Airport Extreme base station, I get average speeds of:

  117 Mbps down and > 11 Mbps upward

  At the opposite end of the House, I use a wireless extension: Airport Express 1 St gen - model A1264 (MB32 1LL/A)

  Here, the download speed goes up to 14mbps . 

  Download speed rest > 11 Mbps

  My ISP will not have my current cable modem: 6580 Motorola (jumpered to disable router) to provide speeds greater than 100/10 (though even I can actually slightly higher than average, I have indicate above).

  If I replaced the modem with my ISP (Time Warner Cable) provisions for 200/20Mbps (speeds I pay in fact) - and * if * I got then that 100 Mbps speed increase (wireless) when close to my Airport Extreme base station (and I think I'll) - should I then expect to see a significant speed increase at the opposite end of the House , where I rely on the Airport Express wireless extension?

  In other words, is expected to double the speed of my modem now gives me wireless (when you're on my Apple Extreme base station) also be reflected in an increase in speed at the end of the House where I must rely on the Express Extender 1 generation and where I am now only download speeds see 14Mbps?

  BTW:

  1. I can not move my extreme or my Express.  They both must stay exactly where they are. Neither can they cannot be permanently interconnected via ethernet cable.

  2. I don't think the speed reduction I describe is a bandwidth issue because I am the only one on the network and do not have multiple downloads on several devices at the same time.

  Before I ring $$$ on a modem that won't improve my speed, you will appreciate any guidance I where I need more.

  Change of modem can improve the speed of AirPort Express Extender?

  Just a little, at best. The Express pourrait spend 25-30 Mbps. No guarantee, with strangeness wireless... it is maybe the same or worse based on my experiences.

  If you need more speed at the end of the House... the AirPort Express must be located to half way between the AirPort Extreme and the end of the House. Ideally, he would have line-of-sight with AirPort Extreme.

  Yet, you say that you can not move the Express or the extreme and can't get the Ethernet cable. Have you considered or tried Powerline Ethernet adapters?

• Four express airport Wireless extends through the other, instead of directly through my airport extreme

  Hello

  I have a small question which I hope someone can help me with.

  I have an airport extreme that I use as base station, and since I live in a big house, I extended wireless network with four Airport express devices. I put express devices from the airport in mode "expand the network."

  The question I have is that two of the expresses correctly connects directly to the Airport extreme, but the two other go via the two expresses first and not directly to the airport extreme base station.

  I am worried that I have will lose speed because of this and wondered if I can implement all the features four Airport express way so they all connect directly to the base station and not by the other?

  Any advice would be appreciated - thanks.

  I am worried that I have will lose speed because of this and wondered if I can implement all the features four Airport express way so they all connect directly to the base station and not by the other?

  Apple "extend a wireless network" feature works on the strength of the signal, so the ideal situation would be to have AirPort Extreme, located within your home with each Airport Express located approximately the same distance from the AirPort Extreme around the perimeter of the House.

  Think of a 4-spoke wheel. AirPort Extreme would be the "hub" in the center of the wheel and located at the end of a ray separated from each AirPort Express Terminal. In this way, each AirPort Express connects directly to the 'hub' and expand properly.

  The question I have is that two of the expresses correctly connects directly to the Airport extreme, but the two other go via the two expresses first and not directly to the airport extreme base station.

  The two airport expresses which connect to other expresses 'extension' of the network are not all. They 'join' the network... so they could be used for AirPlay or a printer USB remote... but the Express do not 'extends' the network when he "joined".

  You will need to experiment with different places until you see all four expresses connect directly to the main AirPort Extreme.

  As loss of speed in the network is... whenever you try to extend wireless network, nearly half of the potential speed on the network will be lost in the process. It's just a character of the beast to the extension of a wireless network.

  You can avoid the loss of speed in the network by configuring each AirPort Express Terminal to connect to the main router using a wired Ethernet cable connection. There is no loss of speed at all through the connection Ethernet cable up to 300 + feet, so full power is stored on the network when you do it this way.

• Make an express airport only connect to an another AE and not the main Time Capsule.

  Hi all

  I have a Time Capsule airport and 2 Airport Express. The Capsule is far and an of the expressed airport is in the middle (call this) 1 and the other far from it, I'm calling this 2. As it is now, the 2nd Airport Express terminal connects to Time Capsule. However, it gives me much lower speed (Interruptions during the game). But if the 2nd Airport Express connects to the AE first, which is the extension of the network of transport CANADA, significantly improves the speed.

  I've tried everything. All devices are relatively new (think of the last model). I called the Apple Support, but their solution was to any wire. I asked if the 2nd AE can be configured statically, but they have quoted me their policy, which is not supported and took my info and never called back. I read the posts of the forum, but could not find any relevant information.

  Can someone tell me how I can do the 2nd AE connect only to the AE 1 (in the middle) so I can get faster speed for the game device wired to the 2nd AE? Your feedback is much appreciated.

  Kind regards

  B.

  When you try to extend using the wireless, there will be a loss of speed associated with the process.

  When the two Airport Express connect to Time Capsule, it will be more loss of speed because the 2 devices are connecting and extending.

  If the 2nd Airport Express does not connect to... Time Capsule and it connect instead to the 1st AirPort Express... then 2nd Terminal AirPort Express doesn't have to extend the network.  The 2nd Airport Express could be used for AirPlay, or to connect to a remote printer on the USB port, but it cannot 'expand' or 'repeat' in this case the signal of the wireless network.

  So you're wrong bing into thinking that the network is the extension more quickly if the 2nd Express connects to the 1st. Your network will behave at the faster speed even if you just turn off the 2nd Express.  It is not at all in any case extending the network, and you don't need.

  Here's another way to look at the same thing... using an illustration of the Apple support document for the extension of a network:

  

  IF... you can connect the 1st Terminal AirPort Express at the time using an Ethernet cable Capsule... then... the 2nd Airport Express would extend the signal from the first... but speed would be because you are trying to extend using the wireless.

  SO... connect the AirPort Express devices using Ethernet... then you will have maximum coverage at the highest speed... Since there is no loss of signal via the Ethernet cable.

• I can read two-channel USB-6008 using THE Signal Express?

  Hello world!!

  Is possible to read the two analog inputs at the same time?

  Example: Using Signal Express, I need to read the (channel 0) analog input and analog input (channel 1) at the same time.

  I try this but, the signal on purpose gives me an error message saying that I can't read several channels at the same time using the USB-6008.

  Is this true?

  Thank you

  Ivo João

  André,

  Grato definition of pela.

  SUA ajuda muito util faith.

  SDS,

  Ivo João

• Calculations using values in the channels

  Is there a way to make simple calculations (addition/subtraction) of single values selected channels?   New user DIAdem, so I'm not at all familiar with the scripts.  Looks like it should be a simple command, and I'm right on it.

  Thank you

  Shannon

  Hello Shannon,.

  It seems to me that you do not want to add two or more 'cells' (to use the jargon of Excel) together.

  DIAdem manages data such as channels, not individual cells. If the approach to add two cells in DIAdem works like this:

  The variable SMC allows you to access a 'cell' in a channel, using the following sequence parameters:

  ChD (X, Y)

  where X is the line number of the table of channel, and Y is the name of the channel (column) or the number of the cell you want to access.

  For example, this expression here calculates the result of adding the value of line 2 of the channel called "Temperature_1" and the channel called "Temperature_2" of the example data set that takes over at the start of tiara. In this case, R1 is a real internal DIAdem variable that stores a single value.

  R1 = SEC (2, Ch("[4]/Temperature_1")) + SMC (2, Ch("[4]/Temperature_2"))

  The calculation above can be entered in the "Calculator" which is available in MODE of DIAdem and DIAdem analysis in the toolbar.

  

  I hope it's useful, please let us know if you have additional questions.

  Otmar

• Problem with LAN Express airport

  Hello

  I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.

  Thank you

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.

  Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?

• How can I reset my password forgotten on model express airport A1409.

  How can I reset my password forgotten on model express airport A1409.

  Not a big deal, but A1409 is not a model number of all AirPort Express. This is the model number for a Time Capsule.

  Please take a look at this user points by expert forum Tesserax.

  Airport - access to forgotten passwords