Part off missing hard drive

Similar Questions

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• my creative cloud is still on my hard drive.  I want my info only on the cloud not on my hard drive. How can I get all my info right on the cloud and turn off my hard drive?

  I have information on my drive and creative cloud.  How can I get this info off my hard drive and only in the cloud for my space on my drive hard is freed up?

  Thank you

  @mikeh95269662 - Yes, you can store files in Active CC but have not in your creation Cloud Files folder on your computer.

  Creative application Cloud Desktop open the Preferences and move from the general to the creative cloud tab tab. Then, under the creative cloud Apps tab switch to the files and sync on / off select disabled. This means that no files will be synchronized.

  You can access your files from https://assets.adobe.com/files for downloading and uploading.

  

• Turns off external hard drive... Do not see it displayed in my computer

  I've just set up a new computer and I copied filed from my old computer to an external hard drive.  When I plug my external hard drive to the new computer USB port... it turns on but only run for a VERY short time, and then turns off.  I tried to see the external hard drive showed in my computer... it does not appear there.  Y at - it something I need to do for my drive external hard DO NOT turn off after a few seconds.  Why I don't see that there is another "drive" on my computer?

  I would recommend that you contact the manufacturer of the external hard drive and see if they can provide a flexible solution. Good luck, Bob

• MISSING hard drive volumes (D / & f /)

  I got 4 partitions on my hard drive(C, D, E, F). but now I can not find D & F readers 

  Windows displays C & E readers. readers D & f are missing.
  
  also, when I attach my USB, windows displays the USB in the D drive under devices with removable storage

  How can I find the 2 lack of readers back?

  Help, please...!

  Hi John,.

  -You have all four partitions on a hard drive? Or you have several hard drive installed in the computer?

  -Since when are you facing this problem?

  -Don't you make changes before this problem started?

  This can happen if you have several hard drives on your computer and if you lose the connection to one of the hard drive.

  First of all I suggest you to check if you have several hard drives and check the connections.

  You can also go to disk management and check if the hard drive and partitions are recognized in disk management.  To access the management drives follow the steps below:

  1. Click Start.
  2. In the start menu search box type diskmgmt.msc and press ENTER.
  3. In disk management, check the reader connected to the computer and the partitions.

  Post back the result, after checking with the hard disk in disk management and by checking your computer for several hard disks.

  I hope this helps. Post back and let us know the status.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing hard drive in disk management

  I have a barracuda (seagate) 3 TB drive and I am tempting (and failing) to install on windows 7 as my secondary drive. I can see the drive in the bios in its 'physical' State - he shows up. However, as soon as windows load it is missing. It is missing in 'my computer' and 'disk management' and also on the "intel Rapid Storage Technology' program." The first program indicates the Bay has nothing in it!

  I checked my Sata driver with my PC manufacturer (acer). I know that the Sata drive is working as I used it recently and I can also hear the disc turn at the beginning. Anyone can shed light as to how to get the drive working?  Any other details you may need please message and ill do my best to try to answer. Thanks in advance

  The hard drive has been returned because of the incompatibility. New 2 TB drive worked instantly without problems. The drive was defective on delivery or incompatible for some reason!

• Turning off the hard drive replacement

  Should I turn off my CC adobe if I replace my hard drive (reminder)?

  Hi Michael,

  You just need to log out of the desktop Adobe CC application.

  This link may help: connect and disconnect activate Cloud Creative applications

  Kind regards

  Sheena

• Serious virus attack. Missing hard drive. Can I get it back?

  I noticed some typical signs of malware then ran an antivirus software, it detected a few threats and then the computer started to slow down and gel in the end once the scan is completed. I restarted the computer and it crashed again at startup, then starts again but this time I noticed it running some sort of command of the kernel. My hard drive is now impossible. I can still boot into bootcamp (which is located on a separate hard drive), but I do not see my hard drive in Mac OS. I can't find any other information on this. Is it possible to recover my data from Mac? I'd appreciate any help.

  Try to start in safe mode, try safe mode if your Mac does not commissioning - Apple support. What anti virus app did you run? Anti virus apps are not recommended because they can hurt your computer.

• MacBook Air missing hard drive space

  I noticed that the free space on the hard drive on my Macbook Air has been quickly disappear even if I had not been adding lots of new files, certainly not enough to account for the 10s of gigabytes that disappeared last week. I cleaned it of useless media files, which gives him another 20 GB of space. The status bar it reflects accurately at first, but when I started the computer this morning, it had lost 30 GB of this adjustment.

  After you run WhatSize DaisyDisk, I see that they have both claim that my Air uses Go 296, which is in agreement with the about this Mac, but when you look at the size of the actual folders, there is no way that they measure is added to this amount.

  Using Get Info, I got the following:

  14.43 applications gb

  Users 42,45

  System of 7.77

  Library of 8.95

  That all adds up to about 74 GB of used space. WhatSize actually gives me different numbers. Where in the world are the other 220 or so lack of gbs? Any help would be greatly appreciated.

  (Note: although I typed this out, I noticed that about 8 GB of free space have disappeared in the status bar)

  Here are a few screenshots of WhatSize and disk utility. Of THE claims that 'other' includes 283 GB, but I can't understand what is included in whatever measure it as 'other '.

  

  

  

  If you want more accurate stats from the about this Mac, then to re-index your drive: Spotlight - how to re - index folders or volumes - Apple Support.

  Free space on hard drive

  1. see Lion-Lion/mountain/storage of the Mavericks display.

  2. you can remove the data from your file except for the folder/Home/Library /.

  3. visit The FAQ XLab and read the FAQ on the free space on your hard drive.

  4. also see release space on your Mac OS X startup disk.

  5 see where my disk space gone?.

  6 see the storage view.

  You must empty the trash in order to recover the space they occupied on the hard drive.

  You should consider to replace the drive with a larger. Check out OWC of readers, tutorials and boxes tools.

  Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are.

• pilot missing hard drive

  Hi, I use ubuntu 12.04 LTS on my HP COMPAQ CQ 42-451TU notebook.now I want to remove ubuntu and install windows 7 during installation, I do not see any hard drive to install windows, instead he ask me to load HARD drive driver.i pressed a button load driver but search ends in no result.can help you find the right driver? HARD drive is Hitachi HTS54503.

  Turn on your notebook and enter the BIOS. The hard drive is visible in the BIOS? If it is then life is good. Installation of Ubuntu linux to the hard drive of the laptop all has changed the format of partition of the hard drive that is not recognized by the BIOS of the laptop. You can fix that with a standalone utility, as described in the next paragraph...

  The easiest way would be to use HiRens Boot CD on USB.  Boot on the USB flash drive and and use the GParted utility that is available. GParted to delete partitions on the hard disk. Now that the hard disk is raw and has no partitions or volumes, Windows installation on the hard drive should be simple enough.

• Missing HARD drive password

  I did remove the data from the device and put a password on the HARD drive, but after deleting data does not display the password does not have HARD drive

  Sorry, mate, but it is not easy to understand your HARD drive problem.

  What HARD drive you have exactly? What and how did you get the password?

  Could it be more precisely explain the current issue?

• Missing HARD drive when I try to install WinXP on Satellite L40

  I have a problem when I setup Windows XP. Its a message appear that there is no HARD drive devices.

  I am using Vista now.

  Waiting for your advice.
  Thank you

  Ceco85 is right. You must install the Intel Matrix Storage Manager before you continue the installation of XP.
  The iMSM can be downloaded from the Toshiba page or from the Intel page.
  Then you will need an external USB FDD to include this driver.

  If you n t the external USB FDD drive, I recommend the creation of a new XP CD with SATA drivers using the 3rd party freeware software called nLite!
  Google for nLite details ;)

  I hope I can clarify this issue. Best regards

• Difficulty to install Windows XP because of the missing HARD drive driver

  Hello

  I recently bought a P200-1 and I try to install Windows XP instead of Vista.
  I bought Windows XP Home Edition. Installation was first arrested for lack of HARD disk drive.
  Classic message: «Setup didn't find any hard drives installed in your computer»
  I downloaded Toshiba support "Intel Matrix Storage Manager" (pilot: ICH8M_32bits).

  The contents of this directory was extracted to the root of a disk.
  I restart my PC with XP CD-Rom and floppy drive connected. Setup download SATA AHCI floppy driver (press F6, and then later S key).
  The installer can read disks and partitions and offers the choice of a partition for the installation of XP system.

  After you have selected a partition, the installation begins and the installation program asks to insert "Intel Matrix Storage Manager" in drive A.
  Here's the problem: floppy drive not responding, disk is not read and XP installation stops.
  Ask for a second time to insert the floppy is suspect because he thought the driver drive HARD has already been read successfully.

  What can I do now?

  Thank you for your help

  JR

  Hello

  The problem might be that you have formatted the HARD drive (partition) or created a new partition after the installation of the Intel Matrix Storage Manager.
  In this case the formatting removes the driver from the HARD drive.

  Another possibility is the use of software called nLite. This software allows to include the SATA driver in the XP installation CD.

  Simply search for nLite and you will get lots of useful details.

  Greetings and good luck

• 12 GB of missing hard drive?

  Hello, I have a t61, which has 160 GB hard drive. I installed windows xp from the CD recovery and after installation, the capacity of the hard drive fell to 143 GB... I know there is a place where recovery is stored on the hard drive... but why it takes 17 GB of space? I checked the recovery partition in disk management and taking 5 GB of space... then where the hell is my remaining 12 gbs of space?

  Do not forget that drive manufacturers measure the capacity of the disk in powers of 1000, but Windows uses the powers of 1024 i.e. Windows will always appear to show less space that the makers say.

  For an explanation look detailed here:

  http://en.Wikipedia.org/wiki/Hard_disk_drive#Capacity_measurements

  Or use the basic rule of wikipedia:

  «A rule to convert quickly the capacity of the drive by the manufacturer to the ability of Microsoft Windows in standard format is 0.93 * less than a terabyte hard drives manufacturer HARD drive capacity and 0.91 * capacity of HDD from manufacturer for HDDs equal to or greater than 1 terabyte.»

• Missing hard drive space

  Good afternoon... It seems that whenever I surf the web, watch a video on Youtube, etc., my temporary internet file is stored on my hard drive. I decided this because I run a security scan every time I find myself with the files of nearly 2 million software security scanning and I have about 200 GB of space unposted. the path of the file that I see through this security analysis is C\users\my name\appdata\local\microsoft\windows\tempintfiles. Needless to say that my disk space disappears quickly. I try to access this folder so I can delete this massive file (probably my historical overview of navigation over the past 4 years), but I get a message "access denied." Any suggestions on how I can do this? Thank you very much!!!

  P.S. I am running Windows Vista 32-bit with SP2.

  200 GB of disk space for temporary Internet files looks all right. Mine is about 250GB. This is on the scale of a system with abundant disk space. It is used not only for the history of navigation, but also for the caching of web pages in order to reduce the loading time on repeat visits.

  There are parameters that affect the used disk space. The location of the settings depends on the browser used.

  For Internet Explorer:

  "Pinion" on the upper right corner of the top bar

  • Internet Options
  • Surfing Hishory...
  • Disk space to use...
  • Days for which these pages are kept.

  Try to set both at the lower end of the recommended vauues and check the results on the reactivity of the browser when you visit the sites and the general system performance.

  Tom Ferguson