Partially shipped order line is interfaced but actually is not in ra_interface

Similar Questions

• my printer has stopped printing. The issuance of documents in Quebec and he says the first line is printing, but it is not.

  my printer has stopped printing.  The issuance of documents in Quebec and he says the first line is printing, but it is not.

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use an access point

  I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use a mac apple OS10.6.8 and the browser chrome. can anyone help please?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• My computer has been destroyed and I have to re - install all my software.  I found my Adobe Acrobat order with serial number, but I have not found a way to re - download the product.

  I need to re - install Adobe Acrobat X or XI (I do not remember that I am brush up of ashes).  I bought a laptop another Sager... extremely good by the way, came out to the orders and the serial numbers for my order and got the serial number, number and (even though I found the cover later in all the undesirable), but I have not found a way to download the product again.

  How can I get the url of re - download product Adobe X, plug my serial number and reactivate the product.  My phone number is the same as when I bought the product, as is my email address, if this isn't a con man who has grabbed my box and fled with her.

  It is the most important issue, and I added only the following at the bottom for people considering the upgrade to Windows 10 RAID arrays.

  Please let me know as soon as POSSIBLE.

  BTW, I'll have to send my phone to SAGER, because I wanted it it configured in RAID 1 and all drivers are now included in Windows 10 and if not, they have a large database they find the driver for any device the problem is with, except the driver for the disks RAID 1 array.  I called MS and I said I was on the phone to Intel who did the MOBO with the hardware RAID and tthat MS Windows 10 kept crashing whenever we tried to load drivers RAID 1.  It is a known issue for Intel.  Microsoft just laughing about it.  Has anyone experience this problem at the moment?

  Post edited by: John Regus

  Acrobat X and XI downloads are available here, but you need to know is you have a license for, like your s/n will not work with the wrong version: download Pro or Standard versions of Acrobat DC, XI or X

• KB2760411, KB2760588, but now "can NOT CONNECT to" SQL Server!

  Today I faced with the same Windows Update problems as many people - with KB2760411 and KB2760588 constantly reinstall - and try to resolve which included several reboots - system
  ())

  BUT now... a serious problem on one of these machines: cannot access SQL Server!
  Fortunately, I did not run these updates on any * production * machines (I do updates on development machines, first) - this is a development machine - but I still need to get working SQL Server of this machine!

  I tried to use a Windows login to connect and tried to use a SQL Server to connect user, and what it in either, looks like the same message:
  "Cannot connect to ."
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (Microsoft SQL Server, error: 2)

  Note that for windows, this server running Server 2003 (this is why I chose the value of the drop down menu 'windows xp', below).
  and for sql server, run SQL Server 2005.

  Help!?

  ALSO NOTE: I KNOW THIS ISN'T A "NETWORK ERROR."
  because I get the same message when I remote desktop on the server and try it.
  I did try to look in the windows Server 2003 event viewer, but saw nothing relevant under the security, system or Application.

  When I tried it with a sql server login, I clicked on "Show technical details" and got the below (blank lines removed and replaced with the name of the server):

  ===================================
  Unable to connect to .
  ===================================
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (.Net SqlClient data provider)
  ------------------------------
  For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
  ------------------------------
  Error number: 2
  Severity: 20
  State: 0
  ------------------------------
  Location of the program:
  at System.Data.SqlClient.SqlInternalConnection.OnError (SqlException exception, Boolean breakConnection)
  at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning (TdsParserStateObject stateObj)
  to System.Data.SqlClient.TdsParser.Connect (ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean ignoreSniOpenTimeout, encrypt Boolean trustServerCert, Boolean, Boolean integratedSecurity, SqlConnection owningObject)
  to System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin (ServerInfo serverInfo, String newPassword, ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject, Boolean)
  at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover (String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist (SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
  to System.Data.SqlClient.SqlInternalConnectionTds... ctor (DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
  at System.Data.SqlClient.SqlConnectionFactory.CreateConnection (DbConnectionOptions options Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection (DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
  at System.Data.ProviderBase.DbConnectionFactory.GetConnection (DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionClosed.OpenConnection (DbConnection outerConnection, DbConnectionFactory connectionFactory)
  at System.Data.SqlClient.SqlConnection.Open)
  to Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection (UIConnectionInfo above, IServerType server)
  at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser)

  Thanks Nirmal for the acknowledgement of receipt.

  As you can see, we ended up find us the answer.
  (BOWL is not same document how to grant "Log on as a service", under Server 2008 R2, WHEN ON THE DOMAIN CONTROLLER.)  BOWL documents which fully Server 2003, but only partially for Server 2008 R2.)

  But we are not given the opportunity to "mark as answer" on our own solution.
  If YOU think that the INFORMATION we posted had value, YOU may mark as answer.

  The TechNet link:
  Unable to connect to SQL Server... (includes advice in response: measures to grant permissions in Active Directory, the domain server * RUNNING SERVER 2008 R2 *).

  Thanks again.

• I bought the subscription, but it's not appears, still only 1 subscription

  Dear Sir

  I buy a membership of 800 minutes to call Bangladesh order No. xxxxxxxxx. But he does not appear in my subscription, and I could not able to call but they deduct my money. So, how I was able to solve the problem through to communicate with Skype management. I tried to contact them through the chat option, but there is no answer because nobody is there.

  If anyone knows anythings to solve problems through to contact them please suggest.

  REMINDER
  To protect your privacy and the security of your account NEVER include in your message:
  Complete, email, Skype name, phone number, order number, payment information...
  
  The information is for your benefit and protection.
  You can not understand how subscriptions work. Your account shows that you used your allocation full minutes in your current billing cycle. The distribution of your next minutes will be added to your account when your next billing cycle begins.
  
  Renew your monthly membership before the end of the present billing cycle has no effect on the date on which your next posting of minutes is added to your account.
  
  To continue the call until your next minutes allowance is applied to purchase an additional, but with a subscription amount different of minutes or a little Skype credit please.
  
  Moderation of Skype unit

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• I need to change my account settings, just know that my acount I live in the United States but actually I live in Belgium and I need to change it before I can order/download photoshop

  I need to change my account settings, just know that my acount I live in the United States but actually I live in Belgium and I need to change it before I can order/download photoshop

  Select a store

• How can I cancel a sales order line quantity in Axapta

  Hi all

  I use AX 2009. Assume that the command is created with quantity 10 and 10 quantities are picked. Choose list registration is done for the line. How can I cancel 3 quantity for the sales order line. Help, please
  Kind regards
  Ramanantsoa

  Assuming that you problem is Microsoft Dynamics AX, I suggest you repost you question in the forum dedicated to product here:

  http://community.dynamics.com/product/ax/f/33.aspx?ref=php .

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Novice tried several fixes, but still can not in line with the bureau. PLEASE HELP!

  Folks, I'm sorely need help so that I can get online with my office. I use the laptop from a friend so that I can get online and post this question. I am not real computer savy, but I can follow the guests to help (I tried everything suggested by 'help') and I searched through this forum, checking the erros of suggestion which could be a problem (nothing works). My computer is a Dell Inspiron from 2007 running a 32-bit system with Vista Home Premium.  I use ie9 and I know that my real internet line connection works (I disabled the feature wireless on the laptop from my friend and then was able to access the internet via the cable connected to my desktop computer)

  Yesterday, my computer froze completely while I surfed the web and I was forced to cut the power to unlock things.  When I rebooted my computer the ikon of connection in the lower right corner shows 2 messages:

  "State of the unknown connection.

  "The dependency service or group could start.

  If I click on the apparatus of internet Explorer, I get the following message:

  "Network adapter 'Intel(r) 82562V-2 10/100 Network Connection' having driver or hardware related issues.

  I followed the troubleshooting section and the link 'click here' 'my device used to work, but now does not work'.  As suggested, I reinstalled the Intel driver mentioned above and by using the Device Manager, I checked "Network adapters" and see the Intel(r) 82562V-2 10/100 adapter. I have a right-click and do "Update driver software" and my computer says "the best device driver software is already installed you" and "Windows has determined the driver software for your device is up to date"

  I also tried to turn off my modem and wireless router to reset them and which did not help. One thing that is weird is that my Norton antivirus gets partially disabled (I get a notice 'not protected' when I go through the various aforementioned corrections.  Don't know if it's indicative of anything but figured I would mention.

  I am at my wits end with this and will keep laptop from my buddy for the day that I try to repair my desktop computer; quick answers are highly appreciated.

  Hello

  ·         What is the model number for Dell Inspiron?

  Step 1:

  Instead of using Device Manager, I suggest you to download and install the latest network card drivers on the website of the manufacturer (Dell) for Windows Vista on the computer.

  Check the availability of the network based on your model and operating system driver:

  http://support.Dell.com/

  Step 2:

  Also, try to Uninstall then reinstall the Norton antivirus program and check if it works or good contact Norton support to improve support for Norton antivirus.

  http://www.Symantec.com/support/

• shipping order

  I want to order your online desktop, but I wonder if you can ship it to Sudan if you have a branch here or not

  Hello

  No member of this forum may accept your order. You will need to contact HP directly, here are the points of contact:

  • http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html
  • http://welcome.HP.com/country/W1/en/support.html

  Kind regards

• Œuvres of VPn on the inside of the interface, but not outside

  I have a PIX-525 with UR license.  I tried to get my VPN to work since my iphone over the weekend, but nothing helped.  Then, I changed the interface inside to see if my iMac could connect and bingo!  It worked.  I then tried to log in via the inside of the interface with my iphone and it worked.

  I have connected a PIX-515e and, using the same settings, can connect to the external interface via my iPhone.

  Strange.

  Now, to answer the pressing questions, yes I changed the IP address of the server in my client IPSEC settings to reflect the external and internal interfaces I was testing each of them.  I was using a pré-partagées secret.  Yes, the secret has been entered correctly and they have all matched... Yes, the name of the tunnel has been entered correctly.  I used the database local user for authentication with username/password name (i.e. no certificate of authorization to make things simpler for debugging).  I changed the syslog to debugging and I see absolutely no error when you try to connect my iphone to the external interface (i.e. turn off wifi so I'm on my 3G data network).  The only thing I see is where my iphone hits the external interface and it's disassembly (or whatever his name is) but that's all.

  Why this work like a charm with my PIX-515e and not my PIX-525?  VPN accelerator card in the 525 can be at fault?  The 515e doesn't have the aecellerator card.  No idea why can't I several a VPN connection inside the interface but not outside?

  Hi Tim,.

  Well it's not so much the DNS rewrite that is the problem (if you delete just the keyword dns VPN will still fail) but using the external interface for NAT. So all traffic intended for your address of the external interface is passed to the "gcbrouter", including vpn traffic.

  I'm thinking about a way to solve this problem, but I really can't find anythign right now. Using a different interface will not work because you can have only a single default route.

  I wonder if this would work:

  remove the NAT interface:

  not static (DMZ, external) gcbrouter netmask 255.255.255.255 dns interface

  Replace with PAT interface, i.e. add such a line for each port that you want to be contactable on the DMZ server:

  static interface tcp 80 gcbrouter 80 netmask 255.255.255.255 (DMZ, outside) dns

  static (DMZ, outside) of the 25 gcbrouter 25 netmask 255.255.255.255 tcp interface dns

  etc.

  In all honesty, I have never seen rewriting dns used with PAT so not quite sure if it will work.

  HTH

  Herbert

• customization of the form - sales order lines

  Hi all

  My requirement is to do a column not used as barcode field, during the seizure of the sales order lines, so that the user enters the bar code. The point corresponding system, description code must do this by default.

  The link between the barcode and the article is available & captured the FDF - attribute1 to the master of the order of the day.

  I used columns customer number as bar code and populated the value of the element using the customization of the form. But in the normal client command line all by choosing the item UOM is filled in automatically and by entering the quantity, the price will fill. This is not the case in my case.

  Property:

  Object type: agenda

  Target the object: LINE. ORDERED_ITEM_DSP

  Property name: VALUE

  Value: = sΘlectionner segment1

  of mtl_system_items_b

  where attribut1 = "| ${point. LINE. CUSTOMER_LINE_NUMBER.value} | "

  AND organization_id = "| ${point. LINE. SHIP_FROM_ORG_ID.value} | "

  Thank you and best regards,

  Max

  In OM responsibility, go to components-> cross reference, create a new Cross Reference Type of barcode.

  Click the Assign button.  Add an element and in the value column, put your code bar.  For bar codes, leave the 'Applicable to all associations' checked.

  Now go to the screen and control in the field of the ordered item, type the barcode value that you set up.

  Using tools folder on the command line, you can expose 'Internal Article' and 'Type of item identifier' to see that the type is 'Barcode' and it is mapped correctly your internal inventory item.

  Most of the documents will show the ordinate the question - if all your documents will also show the value of code barcode for this command.

  Here is an article with some screenshots: Johan Louwers Personal Blog "my view on the world".: Oracle EBS cross references

• After the update 42, partial load in memory (Task Manager), but the software antivirus keeps thread bound to perform but only loads 2nd & subsequent.

  Manager tasks shows Firefox loaded as a service, but a of threads waiting to complete. There is no application shown in the Task Manager (which seems reasonable that Firefox has not loaded).
  There is no error message. The 'circle of rotation of microsoft"is going for a few seconds, then disappears as if the schedule.
  It happens after 2nd & subsequent charges after reboot. Firefox seems to work the first time after reboot. It happened only after upgrade to 42. Clean installation makes no difference. Chrome works OK
  Worked well up until the 42 update. Tried to do a clean install with the box to inform Mozilla erased.
  Maybe Firefox started using a port that is blocked by the antivirus? I don't get no logging for the virus scanner showing what it to be blocked. A comprehensive analysis reveals nothing.
  Operating system is Windows 10 (64-bit)

  Abandoned trying to actually find what is actually happening. Changed software virus scanner.
  I think (and this is just a guess) is that to integrate with windows update update 42 change the output method to the telemetry file the antivirus does not. It is perhaps that the antivirus cannot manage that file or property, but it does not record the fact, a failure of the antivirus.
  There is a hint of doubt in my mind when an upgrade causes a system that works to fail in a non traceable method.

• Professional information package launched by mistake on my Mac. Since then, the computer is out of order.  The app is always open to the dock, but cannot close or force quit it. Power button doesn, t make a stop. Computer is NOT frozen, but apps does not

  Professional information file on my Mac. Since then, the computer is out of order.  App always opens in the dock, but cannot close or force quit it. Start button / stop is not make a judgment. Computer is NOT frozen, but apps does not open. Cannot shut down, restart, or use something else! Help!

  If you hold the button power for more than 10 seconds, it will not shut the MBP?

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• How to download an app on my iPad pro? I can search and locate the application I want to download, but then does not know how to download actually.

  I can't figure out how to download an app on my new iPad pro.  I can get a soft, and it appears in the search bar, but then does not know how to download actually.

  To download a free or paid app in the iOS store, you press the rectangular block that displays the word FREE or the actual price of the application.

  Then, there is a prompt to connect to the iOS App Store with your Apple ID & Password to accept the purchase and download it to your iDevice.

  Good luck!