Partition a new drive of 320GB for XP Media

Similar Questions

• I can not format or partition my new drive HARD internal

  I have a MacBook Pro late 2011. The other day, I was unable to boot and got the flashing question mark folder. When I command + R, my old 500 GB of HARD drive was not appear. I decided it was time to upgrade. I bought a Seagate 2 TB drive and installed it. I am now ready to install OS X on it. I am able to see the drive when I go into Internet recovery, but failure of attempts at partitioning and formatting. The error for the formatting is "wipe data on the volume to avoid future to probe accidental is not" and the error for partitioning is the same. I looked for answers and I tried all the solutions I could find, but I am unable to do the single user mode that I can't boot into it successfully.

  Are there other options or ideas that guys maybe I can try?

  I suggest that you consider getting an external adapter or place the new drive in an external enclosure. Install Mac OS X on this subject here.  When you are satisfied with the way it works, and THEN do the transplant.

  This separates from the software install the registry numbers, reduced the problem by half and the two halves solvable.

• Should I partition the new drive?

  I installed a new hard drive of 320 and then install Windows XP without the disk partitioning. I think it was a mistake since I have a number of questions: i.e., no message of paging to the startup file and the computer is not shut down correctly, all turn off. I need to create a partition?

  In addition, my computer only recognizes the former status of 80 GB from my old drive.

  If you need to upgrade the BIOS then do.  Also, make sure that the rider of the disc is correctly defined (master/slave/Cable Select), if it is the only drive on the IDE controller, you can set it to master.

  The Windows XP Setup program took care of partitioning, there is no need to use other tools of preparation of partitioning or disk when you install Windows XP, Setup will give you a list of available disks and you ask what disk and partition you want to install Windows, it will load if necessary partitioning.  If you select a new disk that has not been initialized or prepared you will be asked and asked if you want to create a partition, Windows cannot be installed on a disk at least a primary partition, the installation program will create the partition before it can go further, you could not install Windows on your new drive if she had no partitions the Setup program creates the partition that invited you to do when you have Windows installed on your new drive.

  Is the new drive the only hard drive in the computer when you installed Windows XP?  The "No paging file" error is usually caused by incorrect drive letter assignments, glitches or mix ups installation can cause problems with possibility of drive letter.  When you install Windows, you must ensure that there is no external device connected to the computer other than the keyboard, mouse and monitor, make sure that there is no USB drives don't, sticks of flash, cameras or printers with readers card connected to the computer, disconnect everything except the keyboard, mouse and monitor.  Having poorly adjusted riders drive can also cause problems, for example have a drive as a slave when it is the only drive on the controller may cause problems or give unexpected results during the installation of Windows.

  John

• New driver of BM for CC

  Blackmagic have a new driver for Adobe CC

  Yes, see this post:

  http://forums.Adobe.com/message/5421041#5421041

• Partition the new drive and put windows on a small partition, how can I "move it".

  Hard drive crashed and had to get a new.  We partitioned the 500 Gig into 5 segments C:.5 Gig F:10 Gig G:H: I: integer 100 Gig... We used the production disks for the computer will... After a window few months started slow like a turtle, and then began there was not enough space on the drive to work. Other readers are empty or almost empty.  I am hoping there is a simple way to move everything to another drive with more space or something.  I just drag and start again, but I have programs that I also installed that I have since lost the discs too much that I don't want to lose.
  Thank you
  Zyn

  Thanks for the info... uh do often criticize people on this site? I'm just a question because I am very novice in computer technology and I trust often more educated people. But I don't like to be belittled because I thought it was one person and another don't think it's a good idea. Worried if I should keep coming back here to get help or not.

• Satellite P - new driver AMD (ATi) for Firefox

  Would it not be possible to persuade Toshiba to publish an update for the graphics driver before Firefox 4.0 is released this month? For the average user with an older driver that October 2010 hardware acceleration is not available.

  Hi Pennington99,

  To be honest I n t have an idea of what you hear

  What model of laptop you have exactly?

  Why is a new display driver for Firefox 4?

• Should I partition my new SSD once I install it?

  End of 2011 MBP 17 inch

  A new SSD Crucial. I have heard some say that you should partition the new drive before you reinstall a new copy of Mac OS x. Is this true?

  Yes. True for all new hard drives or readers drawn from non-Apple computers. Here's what you can do:

  Net Clean Install of El Capitan

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click on the Erase tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

• Compatible replacement optical drive CD-DVD for Equium L350 - 10L

  Hello

  a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

  Anyone would be able to tell me what brand/model compatible with this model or I can buy any player?

  "" I saw a slim drive of ' Techguys CD-DVD "PC World - would that be ok?
  I'll find someone else to adapt to it that I don't have any idea how out the CD.
  He previously worked with other discs and it was laid flat in the tray - now the drawer does not close.

  Hope someone out there can give me some advice on why it happened suddenly and what new drive to substitute for the purchase.

  Thank you.

  > a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

  You are not able to open the CD/DVD drive.
  There is a little near the eject button.
  You will need to put a small wire or another object in this set to eject the CD or DVD.
  It is a last option if the eject button does not work.

  PS: in the manual of the laptop you should be able to find information on compatible CD/DVD players.

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• How much space do I need to allow for Vista while partitioning the hard drive?

  How much space do I need to allow for Vista while partitioning the hard drive?

  I am installing on a new drive hard and need to partition the hard drive.

  I remember he had a certaing amount allocated for vista and before recovery.

  Help, please!

  Hello

  40GBs is the minimum; who will be vey quickly useless.

  Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

  You can use all of the hard disk space available to install Vista on.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows 7 - partition windows on a new drive... travel startup gives nothing but the black screen and blinking cursor

  I am replacing a hard drive and move a partition Windows 7 from one disk to another.  The original partition of Windows 7 starts and works perfectly, but when I clone to the new drive, I have a terrible problem getting the new boot drive.

  On the original drive, the partition is the partition 3, on the new disk partition is partition 2.

  Both drives have the same size of cylinder.

  The new partition was created as a partition main with the same dimensions as the other and cloned in the whole content of the partition.  The files are all there in the new partition.

  He is currently not starting correctly, it starts the partition, but then he's here - I don't see Windows Welcome screen or anything - just immediately inadmissible black screen with a blinking cursor.  All I can do is reboot.  By pressing F8 at startup does nothing.

  Start of support for windows 7 and running repair features discovered the new partition as C: and CHKDSK C: points and gives a good report of the partition.

  BIOS settings have been lacking.

  The following commands were executed the repair windows 7 installation media feature:

  Of http://technet.microsoft.com/en-us/library/cc749177 (v = ws.10) .aspx

  BOOTSECT/NT60 C:

  And http://support2.microsoft.com/kb/927392

  BOOTREC /FIXMBR

  BOOTREC /FIXBOOT

  C:
  BOOT CD
  BCD ATTRIB S H R
  REN C:\BOOT\BCD BCD. OLD
  BOOTREC /REBUILDBCD

  The new partition was made active and is the only asset.

  If I erase and freshly installed Windows 7 on the partition, it does not start successfully, but if I then replace the contents of the partition with a clone of the other partition of work, it does not work.

  So that leaves me with a pretty good confidence that the problem has nothing to do with the charger starting and everything related to the content of the partition itself.

  I can't find more useful information for the boot partition.

  Any ideas?

  Moving Windows is not the best method.

  It is better to 'image' or 'clone' Windows to the new drive, using software such as Acronis

  True Imageor AOEMI Partition Wizard (free). I've used both (has a free version of Western Digital

  Acronis to use if you have WD hard drives).

  .Acronis.com/en-au/Personal/PC-Backup

  .disk-partition.com/Free-Partition-Manager

  (EDIT: I need to be careful.) Had redundant stuff here...;). )

  Dual-boot can be difficult in the best of times, but two partitions on a HARD drive...

  I don't think that you can select a particular partition in the BIOS to be your first boot option, only

  from the HARD disk, so it would be a blow to the top.

  See if there's useful information below-

  .sevenforum-Restore-Windows-7-Master-Boot-Recor

• Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

  Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

  Both fresh and freshly, can use as a Time Machine backup HARD drive, although I personally prefer to use newly formatted disk.

• Satellite T230D - new driver for webcam

  I have problems with my built-in webcam. It does not seem to be developed.

  Advanced application Toshiba Web Camera displays the options of normal auto focus or Macro, but all the options are greyed out meaning I can't select them. I think I may have not the right driver to allow these settings to be changed. Currently there is a driver 'USB 2.0 Camera' installed with a Microsoft driver dated 06/21/2006.

  I tried the Australian websites and European Toshiba for a newer driver and fails. I also tried to reinstall the Toshiba Web Camera Application where pilots have been grouped with it, but that doesn't solve the problem or update the drivers.

  Reference number of the machine is PST4LA-00R008. You can provide any assistance would be appreciated.

  Hey Buddy,

  According to the reference number of your model is an Australian model because I found on the Australian Toshiba page:
  http://www.MyToshiba.com.au/

  The most recent software Toshiba web camera application for Windows 7 64-bit is the 1.1.1.15 version and also for Windows 7 32 bit.

  Before installing it I recommend to remove the old driver first (Control Panel > uninstall a program). Search for the webcam software and click on uninstall. Follow the instructions on the screen. Then, restart your computer. Download and install the freeware Ccleaner tool and do a registry clean. This can remove old registry keys and restart your computer. Then install the new software of the site Web of Toshiba webcam.