Partition Boot Camp Windows Wincloned 10 won't boot w OSXRESERVED

Similar Questions

• VMware Fusion 3.0.1 will not partition Boot Camp launch

  Ok. I'm ready to drop Fusion 3.x! That is the problem.

  MacBook Pro (version 3.1), VMware Fusion 3.0.1, Windows 7, Mac OS 10.6.2. I set up a partition Boot Camp 3.0 and installed Windows 7 without any problem. I then installed application VMware Fusion 3.0.1. Started VMW Fusion and tried to start the Boot Camp partition. AHHHHHHHHHH! Following error code appears:

  "Could not open the disk" / Users/xxxxxx / / Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp Camp/%2Fdev%2Fdisk0/Boot parition.vmdk' or one of the snapshot disks it depends on. "."

  Reason: The partition table on the physical disk has changed since the disk was created. Remove the physical disk of the virtual machine, and then add it again. »

  I uninstalled VMWF using the uninstall application. So to all the files that I thought may be affiliated. Then reinstalled VMWF 3.0.1. Same error message.

  I have no idea what it is or what it means! Help, please!

  This is not related to the 3.x (for example 2.x will have the same problem). The problem is that the table to partition your drive said he has and the VM wants to use the partition table does not match (maybe because you have migrated from another Mac and have a machine rest of virtual Boot Camp or repartitioned after the Boot Camp virtual machine was created). (UN) Fusion device does not affect the virtual machines, so that won't help.

  Instead, leave the merge and delete the machine virtual Boot Camp /Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp. Then start the merger and allow him to recreate the Boot Camp virtual machine. As your data is on the Boot Camp partition, it is not affected by this.

  Note: This assumes that you have not tampered with the virtual machine Boot Camp to add disks or snapshots or something like that. I don't remember any who never do this, but it is theoretically possible and if you don't you will lose data, so I mention it for completeness.

• partition boot camp disappeared after resizing Macintosh HD

  Hello

  I have a macbook pro with OS X El Capitan 10.11.6.

  I had a windows 8.1 installed on boot camp and ran out of space on windows, so I tried to extend the space by adding a new partition on mac and then merge on windows using the "minitool' but when I rebooted with now that the ALT key was not the boot camp partition...

  I then started the mac and changed the boot disk in boot camp and restarted and it gave me a message "there is no disk bootable..." or something like that.

  It's really important not to lose the windows and more important still do not have to format the new laptop please (because I had a similar problem before Re: Partitioning a Hard Drive Error on MacBook Pro)

  I tried to check for similar discussions but seemed to I'll do it is harder to resolve because I do not understand most of what is said and was afraid to do worse.

  Hello MayMedhat,

  I understand the partition Boot Camp have been adjusted and you are no longer able to access the windows on your MacBook Pro.  Because you cannot access side Windows of your Mac after setting, you must recreate your Boot Camp partition and reinstall Windows on your Mac.

  Set up Windows on your Mac partition
  
  

  Change the size of the partition

  It is not possible to change the size of the partition after installing Windows, but you can delete the partition and create a new partition to the correct size. Do not try to resize your Windows partition or a third-party application.

  How to install Windows using Boot Camp

  Please let us know if you need any additional help and thank you for visiting the communities of Apple Support.

  See you soon.

• Boot Camp Windows 10 incorrect use of storage

  Hello

  I have a 2015 end MacBook Pro with 500g of ssd. I have 10 windows entirely running and allocated approximately 250 g for it. But when I go to the use of the storage in the settings, it shows that my C: drive is 698g. I also checked command prompt and records management, but it seems that everything is normal.  In addition, I also fixed the disc as well in mac and Windows operating system recovery mode, but it didn't work.

  Recently, I used camptune to increase the size of the partition boot camp in 100g, and I strongly suspect that this could be the problem, but I have not found a solution.

  Thank you

  Can you post the output of

  diskutil list

  Cs diskutil list

  and

  Windows Disk Manager.

  You may need chkdsk on the Windows side.

• SuperDrive drive broken don't Boot Camp Windows at El Capitan

  I tried many schemes proposed in this forum and at least a dozen different ways to do El Capitan boot camp Windows. I have run csrutil disable recovery and used the utility gdisk to rewrite the workout plan to use GPT.  It seems to go as far as the installation of all files of Windows 10 then I get the message Windows "Windows didn't prepare the computer to start the next phase of the installation.» To install Windows, restart the installation. "I tried bcdboot c:\windows and manually enter the drive and also the partition GUID I recorded option detail gdisk. But I get errors co so there is something that has always does not run.

  I have not yet tried Rufus. I used unetbootin to make my Windows 10 microsoft 64-bit ISO flash player. I also have an OEM Windows 8 disc bought three years ago. I am a little concerned by the barking of multiple trees simultaneously.

  It's a MacBookPro6, 1 EFI and SMC confirm current. 8 GB Crucial RAM. The SuperDrive doesn't work, or my burner USB Pioneer BD-204 (with confirmation last firmware, which actually turns into a BD-205) will allow you to install windows despite offering an optical EFI partition after the option - reboot. I was able to get Windows installed from a USB key that I did leave an ISO download unetbootin Using Microsoft as described. Maybe Rufus has solved this problem?

  I am entirely prepared to scrub the entire disk (that I had actually done yesterday, by a genius) and start from scratch if I could just find a step - who would work in reality. I really need to boot camp Windows 8 or 10 of this machine again.

  I'm even ready to install another internal drive instead the SuperDrive for boot camp Windows, but I want to assure you that I have does not work in the same exact questions if I take this step.

  Also boot camp just offers me the possibility to specify an ISO standard, there isn't that two not three check boxes and whenever I try from the disk, I get the black 'system unboot press a button' block after it restarts.

  I also edited info.plist of boot camp to add my model to the list of the 32 bit patterns.

  There is absolutely no problem backup etc., yesterday, the genius was so smart that he told me to try a Microsoft store.

  Please help this is going on 10 days, that I tried to fix this now. Should I go back to the Apple Store and ask them to put the Mavericks on this? That's how I got 8.1 Windows boot planted three years ago.

  Have you looked at this - http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... ?

  Do not install a second Optibay drive, until Windows is completely installed, otherwise you will encounter more questions.

• Transfer the Partition Boot Camp?

  I made a disk image of my Boot Camp / Windows XP partition of my old MBP with Snow Leopard (now non-operational) 10.6.8 on an external USB hard drive. I have a new machine with El Capitan. Can the former Boot Camp partition on the external drive be installed somewhat on the new computer with the Boot Camp utility and if so, what would be the correct procedure?

  What year is your new Mac? 2015 and subsequent Macs will not support XP and XP does not have the correct drivers for the newer hardware. Do not erase the internal SL/XP disc.

• Boot Camp Windows 7 on El Capitan MacBook Pro mid-2009

  Hi all

  I'm trying to partition and install Windows 7 on my mid 2009 Macbook Pro running El Capitan.

  I have a Windows 7 ISO, have mounted two using a USB flash drive and on the desktop, however I constantly get this error:

  

  How can I fix this error and how to install Windows 7 on my Mac? It would be desirable to do so without the use of Boot Camp (such as described here?) ( http://daksh.me/how-to-install-windows-on-your-mac-without-bootcamp/ )

  Thank you, Josh.

  Your specific Mac needs a physical DVD into your integrated optical drive to install Windows 7.

• Resized Partition Boot Camp, is no longer work

  I used the Tune Camp to resize my Boot Camp partition, which worked very well.  I can boot into Mac or my Boot camp.  But when I tried to load my partition Boot Camp in Fusion, I got an error message stating that I had to "remove my hard drive and then add it back."

  So, I went into the settings of for my Boot Camp in merging partition and removed my hard drive.

  But now I can not add it again.  I do not know how to proceed, and Fusion does not start from my Boot Camp Partition not more because he does not see any hard drive.

  Can anyone help with this?  Or, can anyone describe how can I say merge to re - install my partition Boot Camp, or re - initialize somehow?

  The following has not been updated for Fusion 3, but is still applicable in what to do as much as to try to correct the situation.  Because you used a third-party tool 3rd you can have inconsistent information between GPT and MBR and could require techniques advances in recovery of preforms however try which is below first.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• Problem with the conversion of Partition Boot Camp

  I would have just dl and installed the trial version of 3.0.  After running and by selecting the boot camp for the boot partition, merge began to 'prepare' the partition for use.  After about 45 minutes, the process had not been completed.  I grew up the activity monitor and found that the process did nothing.  I closed the process, thinking I could start over again at the launch of Fusion.  Wrong, merger saw the partition boot camp into a virtual machine that could not be started.

  Is there a possible way to start the process of 'preparation '?  It is apparently the only way to correct the problem.

  Tried from a support ticket, but could not do while I wasn't a registered owner.

  I'm trying to make my choice between Parallels and Fusion, or just stick with BootCamp.  I hope someone can help me with this problem.

  Harry

  Dear Harry,

  I did the same thing yesterday. My BootCamp partition has Windows XP (SP3) and I also have Parallels. I'm now trying to decide if I stay with Parallels or Fusion 3 (to take a possible advantage over the 64-bit @ Snow Leopard).

  My upgrade was fine, it took about 15 minutes to get BootCamp running on the merger. A small step has been to re - activate my XP with Microsoft license, because the "material" changes. I have the MACBOOK PRO 13 '' 2.53 with 4 GB of RAM. I don't really have time to play yesterday, but between Parallels and Fusion 3, (64-bit), I did not see too much improvement on the 'speed '.

  An advantage of having any of virtualization software, is that you can have multiple operating systems running, such as XP, Windows7, etc. I need that because my work, the developer. If you can stay only with an operating system, I guess, BootCamp works very well.

  Kind regards

• Re-partitioned Boot Camp does not not on VMware Fusion

  Hi, I had windows xp installed on boot camp and installed on vmware fusion, that worked well, but then I decided I wanted more memory and have vista instead. Installed on boot camp, but when I click on the partition boot camp on vmware fusion it still considers that I want the xp windows and says that the files have been move or restricted access or check for lack of files failed. Can anyone help, I tried to reinstall vmware, but the same result came out.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• Boot Camp Windows 10 Upgrade does not work

  Hello world!

  I use Windows 7 Professional SP1 with boot camp, I managed to function very well.

  I bought a legal copy of Windows 7 Professional and active, it yesterday, so all is good and works as it should (more or less)

  I did it on my iMac 5 k (end of 2014). I use version 6 of boot camp and installed all updates in OSX as well on Windows 7 via the apple software update tool.

  Now, I decided to upgrade to Windows 10 but somehow it does not work for me as it should.

  I am able to do 10 downloaded Windows and Setup will start, but immediately after it will crash.

  I use the German version so I can only tell you what is presented here:

  "eine handcrafted befehlszeile [/DynamicUpdate] angegeben wurde.

  I don't know what the problem is, I tried 3 times more using the Microsoft upgrade page.

  I also tried the MediaCreationTool but I still get the same error at the beginning of the installation.

  What I need to install additional drivers on my USB dongle or do I have to remove my USB mouse and the USB dongle (which is always to have the files to install boot camp Windows 7 top)?

  I don't see what else to do and hope that someone here knows how to perform the upgrade properly.

  Kind regards

  ela7ion

  Update!

  The upgrade succeeded finally!

  I managed to do the upgrade after removing all devices that are connected to the iMac before.

  This includes:

  -SuperDrive

  -USB mouse

  -USB dongle

  I then started the tool to upgrade from the Microsoft Web site and guess what: it worked.

  Best regards

  ela7ion

• I accidentally put my system as boot partition and my windows partition not marked as boot! Windows will not start! ):

  Hello

  The other day, I have been stupid, play with my windows partitions, I tried to dual-boot android 4.0 with windows, of course, as a study (this version of android has been mainly Linux). A test installation somehow fault, I put my Starter instead of windows system partition! Now windows will not start, it stays on a black screen with a sign less this sort of thing flashes in the corner.
  So I jumped in my disk windows ultimate 7, and it saysBOOTMGR IS MISSING Ctrl + Alt + Del to restart"" and if I try to install Ubuntu via live disc or USB does not start or the other, it displays the same thing.
  Can you please help me solve this problem!
  Nice day!

  After having the BIOS change, restart you your computer with the repair disc in the drive?  If so, what happened?

• Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Start with a utility cd and change the partition Active. If you scroll down on the page and get > CD Bootable and > ImgBurn to burn the iso image to cd, a guide on the use of ImgBurn to write an ISO on a disc is > here. Once created, boot from it.

• Windows Media Player won't play the .zip files. How to see or play these files?

  Media Player

  Windows Media Player won't play the .zip files. How to see or play these files? I'm 67 and not tech savvy thanks for the help.

  Hello

  ZIP files are compressed, so you need to unzip and then play the content if the
  content is of type WMP files.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-GB/Windows7/compress-and-uncompress-files-ZIP-files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my windows Movie Maker won't open the project that I saved. It is said that the program was narrow incorrectly

  original title: Director of windows

  my windows Movie Maker won't open the project that I saved. It is said that the program was narrow, badly what I can do to fix this?

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">